• 대한한의학회지
• /
• 제25권4호
• /
• pp.121-128
• /
• 2004

Objective : The aim of this work is to investigate the antibacterial activity of the essential oil obtained from Artemisia capillaris (A. capillaris), as the development of microbial resistance to antibiotics make it necessary to constantly look for new and active compounds effective against pathogenic bacteria. Methods : The crushed materials of A. capillaris (1 kg) were subjected to steam distillation for 3 h, using a modified Clevenger type apparatus in order to obtain essential oil. Diethyl ether was the extracting solvent kept at 25°.... The essential oil was analyzed by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS). The essential oil and the composition were tested for antimicrobial activities against 15 different genera of oral bacteria. Results and Conclusion : The components of the essential oil identified were: β-pinene (9.36%), camphor (3.32%), 1,8­cineole (4.38%), artemisia alcohol (3.32%), β-caryophyllene (11.08%), γ-cadinene (4.23%), and capillene (32.74%). The essential oil of A. capillaris exhibited considerable inhibitory effects against all oral bacteria tested, while their major components demonstrated various degrees of growth inhibition.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.9-18
• /
• 1995

The substitution of conventional fuel oil by alternative fuels is of immense interest due to liquid oil shortage and requirements of emission control standard. Among the alternative fuels, natural gas may be the most rational fuel, because of its widespread resource and clean est burning. Meanwhile, engine simulation is of great importance in engine development. Hence a zero-dimensional combustion model was developed for dual-fuel system. Natural gas was injected directly into the cylinder and small amount of distillate was used to provide the ignition kernel for natural gas burning. The intake air and exhaust gas flow was modeled by filling and emptying method. Although the single zone approach has an inherent limitation, the model showed promise as a predictive tool for engine performance. Its simulation was also made to see how the engine performance was influenced by the fuel injection timings and amount of each fuel.

• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.107-114
• /
• 1999

To find the best combustion conditions in the heavy oil burner kinetic viscosity of heavy oil A, B and C at different temperature range, from 40 to 140$^{\circ}C$, and the droplet sizes of the heavy oils at different temperature and pump pressure were measured. And, combustion characteristics were investigated under the different conditions : two different heavy oil and three different oil temperature. At temperature of 70, 100, 130$^{\circ}C$ the kinetic viscosity of heavy oil A and B are 7.9, 5.7, 4.3 and 30.4, 13.7, 7.9cSt, respectively. The greatest and smallest viscosity were 7,455 cSt at C oil on 27$^{\circ}C$ and 4.26cSt at A oil on 140$^{\circ}C$. The magnitude of viscosity difference between at 100$^{\circ}C$ and 140$^{\circ}C$ under 6 cSt in cases of A and B oil, but more than 30cST on C oil. Of the droplet sizes, the biggest and smallest droplet size in A oil were 98$\mu\textrm{m}$ at oil temperature of 130$^{\circ}C$(4.3cSt), pump pressure of 1.57MPa and 72$\mu\textrm{m}$ at 70$^{\circ}C$(7.9cSt), 2.35MPa, respectively. It appeared that as spraying pressure increased the droplet size decreased, however, no distinct differences were found in the effects of kinetic viscosity on the droplet sizes of the test range. The best combustion performance was observed when droplet size, spraying pressure and oil temperature were 73$\mu\textrm{m}$, 2.35MPa and 70$^{\circ}C$ producing CO2 of 13.1%, CO of 13ppm and flue gas temperature of 250$^{\circ}C$ in A oil combustion For B oil, it was100$^{\circ}C$, 2.35MPa, 52$\mu\textrm{m}$, producing CO2 of 10ppm and flue gas temperature of 260$^{\circ}C$. In general, it appeared that better combustion results were observed in the smaller droplets produced burner condition.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.149-155
• /
• 2013

Since bio-diesel oil has a merit that it satisfies both demand of substitution for fossil fuel and reduction in carbon dioxide emission, it is widely used in diesel engines by blending in gas oil in small quantity. It is needed to reduce in NOx emission in some way or others if blending ratio of bio-diesel oil is going to increase, because it is demerit that bio-diesel oil emits more NOx emission than gas oil. In this study, it was accomplished to optimize 3 factors what effect on NOx emission as blending ratio of bio-diesel oil, injection timing and common rail pressure with an introduction of a design of experiments, in order to minimize a number of tests. It was cleared that to introduce the design of experiments was very available in NOx optimization.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.281-286
• /
• 2009

아임계 및 초임계 조건의 물을 이용하여 캐나다산 Athabasca 오일샌드로부터 역청 추출 및 황 제거 실험을 수행하였다. 0~120 min의 반응시간, 360, $380^{\circ}C$의 온도, 15~30 MPa의 압력 및 $0.074{\sim}0.61g/cm^3$의 물 밀도를 변화시키면서 micro reactor에서 역청 수율을 조사하였다. 역청 수율은 온도에 상관없이 압력이 증가할수록 증가하였으며, 특히 초임계 영역에서 수증기 개질반응에 의해 생성된 수소에 의해 역청의 수율이 급격히 증가하였다. 전체 기상 생성량은 압력 증가에 따라 감소하였으나 $380^{\circ}C$에서 황과 수소의 생성분율은 25 및 30 MPa로 압력 증가에 따라 소량 증가하였다. 이상의 결과는 초임계 조건이 수소의 생성과 황의 제거에 유리하다는 것을 보여준다. 초임계 조건$380^{\circ}C$, 25와 30 MPa)에서 역청 수율은 최대 약 22%였으며, 오일샌드에 함유된 황 제거율도 최대값 40%에 도달하였다.

• 해양환경안전학회지
• /
• 제19권5호
• /
• pp.518-524
• /
• 2013

본 연구에서는 균질기에 의해 혼합된 물과 벙커-A를 보일러로 연소하였을 때의 배기 배출물 특성에 대해 연구를 수행하였다. 그 결과로 균질기로 균질화 된 벙커-A의 경우, 순수 벙커-A에 비해 NOx 농도는 19 %, CO 농도는 54 % 감소를 나타냈다. 물-벙커A의 경우 물 혼합 비율이 증가할수록 NOx 농도분포가 낮아지는 것을 확인할 수 있었다. 특히, 20 %물-80 %벙커-A의 경우 순수한 벙커-A 보다 배기가스 내 NOx 농도가 45 %까지 감소하였다. 그러나 20 %물-80 %벙커-A의 경우, CO농도 분포는 불규칙한 변화를 나타냈다. 이것은 일정량 이상의 물 혼합은 보일러의 연소 성능 저하 원인이 될 수 있다는 것을 의미한다. 이 결과로부터 본 연구에서 보일러의 정상 연소를 위한벙커A유 내 물의 한계 혼합율은 15 % 인 것을 알 수 있었다. 연돌 부근에서 채취한 매연 부착양은 물의 혼합율이 증가할수록 감소하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.961-966
• /
• 2009

This paper presents precise temperature control of oil outlet in an oil cooler with hot-gas bypass control as an industrial refrigerator. The control system was designed for obtaining precise temperature control performance even though abrupt disturbances based on flow rate control of hot-gas bypass. PID controller was adopted in feedback control system. We showed that the gain of PID could be easily determined by using gain-tuning methods without any numerical model. Through some experiments, excellent control performances such as overshoot within 1.7%, steady state temperature error within ${\pm}0.1^{\circ}C$ were established by a simple PI controller. We expect that the system can control the target temperature within error of $0.33^{\circ}C$ under abrupt disturbances.

• 석유와에너지
• /
• 10호통권116호
• /
• pp.84-86
• /
• 1990

이 글은 「Oil and Gas Journal, Sept 17. 1990」에 실린 A.L.Johnson의 'Soviet oil outlook less promisg in 1990's'를 옮긴 것이다. <연자 주>

• 미생물학회지
• /
• 제9권3호
• /
• pp.95-102
• /
• 1971

The growth characteristics of Candida tropicalis KIST 351 on gas oil substrate under different culture conditions were investigated and the preliminary animal feeding experiments using this yeast as a partial substitute of fish meal was also conducted. The yeast assimilates effectively n-paraffins in gas oil ranging from $C_{16}$ to $C_{16}$ with its maximum cell growth at $33^{\circ}C$ and pH 5.5 with aeration of 3 vvn and agitation of 900 rpm. The optimal concentrations of nitrogen sources, $HK_2PO_4$ and $Na_2HPO$ were 4, 2 and 0.5g/1, respectively. Ferrous sulfate, manganese sulfate and zinc sulfate showed positive effect to cell growth with the optimal range of 5-10 ppm. In the feeding experiment with 3 and 5% incorporation of the gas oil grown yeast, neither adverse effects on growth of chicks nor toxic effect were observed. Protein content of the dried cell was 58.8% and its amino acid composition compared well with other single-cell protein products and FAO reference protein.

• 오토저널
• /
• 제13권5호
• /
• pp.81-88
• /
• 1991

Combustion characteristic, concentration of NOx and exhaust smoke opacity was experimentally tested, according to fuel injection timing, mixing ratio of water and methanol for the driving condition of 2000 rpm of engine revolution and constant load(7.5kg/cm$^{2}$) using emulsified fuel of gas oil-water methanol. The result obtained was as following. Thermal efficiency indicated highly 0.4-2.7% for emulsified fuel then gas oil, and injection timing when maximum thermal efficiency, slicily risen then gas oil. For constant fuel injection timing ignition lag was increased, combustion duration decreased, maximum heat release rate indicated high, and concentration of NOx and exhaust smoke opacity is decreased, as function of water and methanol content y was higher.