• 제목/요약/키워드: Oil Thickness Detection

검색결과 8건 처리시간 0.022초

단일 파장의 LED와 CCD를 이용한 유출유 탐지방법 (Oil Spill Detection Mechanism using Single-wavelength LED and CCD)

  • 오상우;이문진
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권4호
    • /
    • pp.323-329
    • /
    • 2012
  • 본 연구에서는 분리된 기름-물 혼합물에 대해 단일 파장대역의 LED 광원으로 부터 흡수된 빛이 전자결합소자(CCD)에 투영된 영상을 분석하는 방법을 통해, 물 위에 기름의 존재 유 무와 상태를 파악할 수 있는 광학적 기름 탐지 방법에 대한 연구 결과를 제시한다. 물위에 기름의 존재 유 무와 기름의 두께 정보를 얻기 위해서, 혼합물을 통과하면서 감소되는 빛의 강도를 전자결합소자로 획득한 영상을 통해 빛의 세기를 분석하는 방법을 이용하였으며, 최고의 선택도를 가진 광원의 파장대역을 찾기 위해서 발광다이오드(LED)의 파장대역별로 선택도를 비교하는 실험을 진행하였다. 본 연구에서 사용된 발광다이오드 중 465 nm의 파장대역을 갖는 발광다이오드가 물과 기름의 존재유무 및 기름의 두께에 따라 감소되는 차이가 가장 크다는 결과를 얻을 수 있었다. 또한 실제 해상조건에서의 탐지 가능성을 확인하기 위해 밝기 조건과 수표면의 기울기 조건을 변화하는 실험을 수행하여 제안된 탐지 방법의 적용가능성을 확인하였다. 해당 연구를 통해서 해상에 유출된 기름을 물과 기름이 갖는 특정파장대역의 빛에 대한 흡수도의 차이로 탐지할 수 있는 새로운 광학적 분석 방법론을 제안한다.

수면 기름 유출 원격 탐사용 마이크로파 라디오미터의 개발 (Development of a Microwave Radiometer for Remote Sensing of Oil Spills on the Water Surface)

  • 손홍민;박진우
    • 한국전자파학회논문지
    • /
    • 제22권9호
    • /
    • pp.858-867
    • /
    • 2011
  • 본 논문은 수면의 기름 유출 유무, 유출된 기름의 분포 및 확산에 관한 정보를 실시간 원격으로 수집할 수있는 마이크로파 라디오미터의 개발에 관한 연구 내용을 기술한다. 먼저 수면에 유출된 두께 0~4 mm 범위의 기름층을 0.2 mm 이내의 오차로 원격 측정이 가능한 마이크로파 라디오미터의 개발 목표 성능을 달성하기 위해 요구되는 목표 사양을 도출하였으며, 이를 토대로 라디오미터 수신기를 설계하였다. 설계된 수신기의 시스템 이득과 잡음 지수의 budget 분석을 통해 설계의 적절성을 점검하였으며, 이 결과를 활용하여 수신 주파수 10.65 GHz, 대역폭 58 MHz로 47.3 dB의 시스템 이득과 0.46 K 이내의 수신 감도를 갖는 고이득, 고감도 수신기를 제작하였다. 제작된 수신기와 표준 혼 안테나로 구성된 마이크로파 라디오미터로 실제 수면 유막을 대상으로 실험한 결과, 0.13 mm 이내의 오차로 0~5 mm 범위의 유막 두께를 측정하는데 성공하여 목표 성능이 만족함을 검증하였다.

팔라듐이 코팅된 광섬유 수소 검출 센서 제작과 응용 (Fabrication and Application of Palladium Coated Fiber-Optic Hydrogen Detection Sensor)

  • 김광택;이상원;김동근;최누리;이종력;백세종
    • 한국전기전자재료학회논문지
    • /
    • 제31권3호
    • /
    • pp.160-164
    • /
    • 2018
  • We have proposed a hydrogen detection sensor based on a Pd (palladium)-coated, single-mode, optical fiber. The experimental results demonstrated that the sensor could detect hydrogen in air as well as in insulation oil. The influence of Pd film thickness and environmental temperature on response time and sensitivity was analyzed. The reflected optical power at the optical-fiber/Pd interface decreased as the concentration of hydrogen increased, in both air and the insulation oil. The sensor showed 0.75 dB of optical power variation when the concentration of dissolved hydrogen was saturated in the insulation oil.

윤활유 물성 측정을 위한 유전상수 센서 개발 (Development of Dielectric Constant Sensor for Measurementof Lubricant Properties)

  • 홍성호;강문식
    • Tribology and Lubricants
    • /
    • 제37권6호
    • /
    • pp.203-207
    • /
    • 2021
  • This study presents the development of dielectric constant sensors to measure lubricant properties. The lubricant oil sensor is used to measure oil properties and machine conditions. Various condition monitoring methods are applied to diagnose machine conditions. Machine condition monitoring using oil sensors has advantage over other machine condition monitoring methods. The fault conditions can be noticed at the early stages by the detection of wear particles using oil sensors. Therefore, it provides an early warning in the failure procedure. A variety of oil sensors are applied to check the machine condition. Among all oil sensors, only one sensor can measure the tendency of several properties such as acidity and water content. A dielectric constant sensor is also used to measure various oil properties; therefore, it is very useful. The dielectric constant is the ratio of the capacitance of a capacitor using that material as a dielectric to that of a similar capacitor using vacuum as its dielectric. The dielectric constant has an effect on water content, contaminants, base oil, additive, and so forth. In this study, the dielectric constant sensor is fabricated using MEMS process. In the fabrication process, the shape, gap of the electrode array, and thickness of the insulation material are considered to improve the sensitivity of the sensor.

Control of Basal Stem Rot Disease in Oil Palm by Supplementation of Calcium, Copper, and Salicylic Acid

  • Bivi, M. Shahul Hamid Rahamah;Paiko, Adamu Saidu;Khairulmazmi, Ahmad;Akhtar, M.S.;Idris, Abu Seman
    • The Plant Pathology Journal
    • /
    • 제32권5호
    • /
    • pp.396-406
    • /
    • 2016
  • Continuous supplementation of mineral nutrients and salicylic acid (SA) as foliar application could improve efficacy in controlling basal stem rot (BSR) disease in oil palm seedling. It is revealed from the results that the highest disease severity index (58.3%) was recorded in T8 treatments at 9 months after inoculation. The best disease control was achieved by T7 treatments (calcium/copper/SA [Ca/Cu/SA]) (5.0%) followed by T1 (5.5%), T5 (5.8%), T3 (8.3%), T6 (8.3%), T4 (13.3%), and T2 (15.8%) treatments. Continuous supplementation of Ca/Cu/SA was found to be the most effective in controlling the disease and the high performance liquid chromatography results showed the detection of ergosterol at very low concentration in the treated samples. Moreover, the transmission electron microscopy analysis results clearly indicated that T7 treatment was also enhancing lignification, which was responsible for the thickness of the secondary cell walls and middle lamella compared to untreated samples. It was therefore, concluded that continuous supplementation of minerals nutrients and SA could effectively suppress disease severity by reducing ergosterol activity and also improve the process of lignification in the treated plants. Furthermore, this treatment also managed to delay the onset of BSR symptoms and promote the growth of the seedlings and eventually suppress the BSR disease.

튀긴 마늘 flake 제조조건의 최적화 및 이화학적 특성 (Optimization of Manufacturing Condition for Fried Garlic Flake and the Physicochemical Properties)

  • 김경이;이은경
    • 한국식품조리과학회지
    • /
    • 제28권6호
    • /
    • pp.805-811
    • /
    • 2012
  • This study was carried out in order to optimize the manufacturing condition of fried garlic flakes as well as to investigate the physicochemical properties of the flakes. Fried garlic flake samples were prepared as follows: garlic was sliced by a thickness of 1.5 mm, 2.0 mm, 2.5 mm, which were measured by a thickness gage. The samples were fried in vegetable oil under different temperatures of $140{\sim}150^{\circ}C$, $160{\sim}170^{\circ}C$ and $180{\sim}185^{\circ}C$. The compression strength depending on the height (h) was measured in order to find the thickness effect by the rheometer (force control: 50 N, h: 3.25 mm). Moreover, the sample with 1.5 mm thickness showed crisp phenomena of the split compared with the crush shape of the 2.0 mm and 2.5 mm thick samples. The result of strength for time dependence showed a sample with a thickness of 1.5 mm, which was measured 5~9 times more than the 2.0 mm and 2.5 mm thick samples. We thought the reason that the 1.5 mm sample had less response power equivalent to compression force than the other samples. Alliin has been found to affect the immune responses in the blood, it is a derivative of the amino acid cysteine and is also quite heat stable. The LC system with a UV detection at 210 nm consists of a separation on a Zorbax TMS column and isocratic elution with water and ACN as a mobile phase. The alliin contents of raw and fried garlic flake under $140{\sim}150^{\circ}C$, $160{\sim}170^{\circ}C$ and $180{\sim}185^{\circ}C$ were 18.10 mg/mL, 14.0 mg/mL, 11.6 mg/mL and 11.1 mg/mL, respectively. The decrement of alliin content under different temperature was a small quantity hence, we confirmed that the increasing manufacturing temperature was not affected by the alliin content. Examining for the particle structure of fried garlic flakes by a polarization microscope, the color of the sample treated at $160{\sim}170^{\circ}C$ was pure yellow. Furder, the fiber shaped particle, which has an effect on the tough texture, almost did not appear compared to the different temperature conditions. Finally, the sensory test for the preference of fried garlic flake under different conditions was carried out and the scores for various sensory characteristics were surveyed. According to the physicochemical measurements and sensory evaluation, we confirmed that the optimum manufacturing condition of fried garlic flake was 1.5 mm thick at a temperature of $160{\sim}170^{\circ}C$.

인공위성 해면고도계 중력자료를 이용한 황해 군산분지의 밀도 불연속면에 대한 연구 (Study on Density Discontinuous Layers of the Kunsan Basin in the Yellow Sea Using Satellite Altimetry Gravity Data)

  • 김경오;오재호
    • 자원환경지질
    • /
    • 제40권6호
    • /
    • pp.751-759
    • /
    • 2007
  • 황해 군산분지의 지하 지질구조를 파악하기 위하여 인공위성 해면고도계 중력자료를 이용하여 파워 스펙트럼 분석(power spectrum analysis) 방법으로 밀도 불연속면의 평균 깊이를 계산하였다. 계산 결과에 의하면 군산분지를 포함한 본 연구지역에서는 각각 -1.1km, -3.4km, -9.1km 그리고 -31.0km의 평균 깊이를 가지는 밀도 불연속면이 검출되었다. -1.1km 평균 깊이의 밀도 불연속면은 본 연구지역의의 탄성파 단면에서 관찰되는 왕복 주시 1초 부근에서 나타나는 광역 부정합면으로 해석되었고, -3.4km 평균 깊이의 밀도 불연속면 또한 탄성파 단면에서 인지되는 음향기반암 상부면과 일치하는 것으로 해석되었다. -9.1km 평균 깊이의 밀도 불연속면은 본 연구지역의 시추공 자료, 탄성파 단면, 광역 지질 등을 고려하여 화성기원 기반암의 상부면으로 해석하였다. 이는 본 연구지역의 음향 기반암층은 기존의 연구에서 고려 대상이 되지 않았던 퇴적암으로 이루어져 있음을 의미한다. -31.0km의 평균 깊이를 가지는 밀도 불연속면은 일반적인 대륙지각의 평균 두께와 유사한 값을 보이므로 모호면으로 해석하였다. 화성기원 기반암 상부면으로 해석된 -9.1km 평균 깊이의 밀도 불연속면의 검출은 군산분지의 석유 가스 부존 가능성에 관한 연구에 있어 기존의 연구보다 심부층(음향 기반암층)에 대한 연구가 필요함을 시사하였다.

음향방출을 이용한 저어널 베어링의 조기파손감지(II) - 윤활유 이물질 혼입의 영향 및 감시 - (Acoustic Emission Monitoring of Incipient Failure in Journal Bearing Part II : Intervention of Foreign Particles in Lubrication)

  • 윤동진;권오양;정민화;김경웅
    • 비파괴검사학회지
    • /
    • 제14권2호
    • /
    • pp.122-131
    • /
    • 1994
  • 일반적으로 회전기기의 저어널 베어링 부분은 윤활유 공급의 부족이나 윤활층에 이물질이 혼입되면 시스템의 고장이나 가동중단 등의 원인이 되기도 한다. 따라서 베어링 손상에 기인하는 사고와 관련된 안전운전 문제와 유지비용의 절감을 위해 여러가지 파괴 및 비파괴시험법들이 사용되어 왔다. 본 연구에서는 저어널 베어링에서 가장 발생하기 쉬운 윤활층에의 이물질 혼입에 의해 야기되는 베어링 파손의 조기검출을 위해 음향방출 기술을 적용하였으며, 전보의 연구에 이어 좀더 정량적이고 체계적인 실험을 수행하였다. 실험실용으로 직접 제작한 모의 베어링 시스템을 이용하여 여러 형태의 인위적인 이물질 혼입 상태를 만들어 실험하였으며 베어링 손상 및 결함 형태의 해석을 위해 AE rms level, 파형분석, AE 변수 등의 여러 파라메터를 사용하여 분석 고찰하였다. 그 결과 AE rms level의 변화가 이물질 혼입의 영향에 민감함을 보여주었으며 AE 변수 등 다른 정보들로부터 손상 원인별로 신호형태를 확인할 수 있었다.

  • PDF