• 제목/요약/키워드: Oil Separation

검색결과 337건 처리시간 0.023초

국보 제326호 청자 '순화4년'명 항아리의 과학적 보존처리 (Scientific Conservation Treatment of the Celadon Jar with the Inscription of 'the Fourth Sunhwa Year'(National Treasure No.326))

  • 이선명;권오영;박종서;한우림
    • 보존과학회지
    • /
    • 제35권5호
    • /
    • pp.453-469
    • /
    • 2019
  • 청자 '순화4년'명 항아리는 굽바닥에 명문이 새겨져 용도와 사용처, 제작자를 알 수 있는 등 초기 청자의 제작 정황을 보여주는 중요한 편년자료이다. 청자 항아리는 과거에 여러 번 수리복원 되었으나 시간이 지나면서 다양한 환경변화로 인해 처리 재료가 노화되어 균열부의 이격 및 단차가 발생하는 등 구조적 안정성이 우려되었다. 보존상태를 정밀 진단한 결과, 청자 항아리는 정면의 '입(入)'자형 균열, 좌면의 'V'자형 결실부를 포함한 균열, 후면의 'J'자형 균열이 주요 손상부위로 확인되었다. 균열부는 장뇌, 건성유, 송진 등이 포함된 정제 옻을 접착제로 토분을 첨가하여 접합하고 접합선은 다시 정제 옻을 칠한 후 금분으로 표면 처리한 것을 알 수 있었다. 결실부는 석고로 복원 후 아크릴 물감으로 색맞춤하였다. 이후 수리복원 재료가 노화되어 1981년에 국립중앙박물관에서 응급처리를 실시하였는데, 균열부 보강을 위해 Cemedine C를 쓰거나 Cemedine C에 Microballoon을 첨가하여 사용하였다. 보존처리는 유물의 보존상태 진단 결과를 근거로, 과거 수리복원 재료를 제거하고 물리적으로 취약한 부분을 다시 접합복원을 통해 보강하는데 중점을 두었다. 또한 추후 전시하는데 활용될 수 있도록 복원부를 중심으로 색맞춤을 실시하였다.

제주해협 통항문제에 관한 법적 고찰 (Legal Approach to the Passage Issues of the Cheju Strait)

  • 김현수
    • 해양환경안전학회:학술대회논문집
    • /
    • 해양환경안전학회 2003년도 추계학술발표회
    • /
    • pp.35-44
    • /
    • 2003
  • 본 연구는 제주해협의 통항문제를 유엔해양법협약을 기초로 검토하여 제주해협의 국제법상 지위 및 이에 상응하는 통항제도를 구체적으로 제시하고자 한다. 이를 위하여 제주해협의 지리적 특성, 유엔해양법협약상의 통항제도, 제주해협의 통항문제 및 북한상선의 제주해협문제 등을 고찰한다.

  • PDF

남동광석(Azurite) 원료 천연 광물 안료의 입도분포 특징 (The Characteristics of Particle Size in Natural Mineral Pigment for Azurite Raw Material)

  • 고인희;정혜영;박주현;정서린;조아현
    • 보존과학회지
    • /
    • 제31권4호
    • /
    • pp.331-339
    • /
    • 2015
  • 본 연구에서는 천연 안료 중 남동광(Azurite)으로 제조된 청색계열 안료 입도의 단계별 분포특성을 파악하고자 국내 외 청색계열 안료 57종을 선정, Malvern사의 Mastersizer2000을 이용하여 입도분석을 실시하였다. 실험 결과, 국내 외에서 시판되고 있는 청색 안료 일부를 제외하고는 비교적 단계별 입도 분리가 잘 되어 있으며, 안료의 입도가 작아질수록 Span 값은 증가하고 입도 분포 범위는 넓어지는 특징을 확인할 수 있었다. Friedman and Sanders가 제안한 Grain size를 기준으로 보면 대부분의 안료는 주로 모래와 실트영역에 해당하였으며 B-100은 72.2%가 점토영역에 해당되었고 A-14는 자갈에 해당하는 영역이 2.5%를 차지하였다. 나아가 동일 성분의 안료라 할지라도 입자 크기에 따라 안료의 발색특성이 다르며 흡유량, 비중, 작업성 등 중요물성에 밀접한 영향을 미친다. 이에 대한 추가적 실험이 필요하며 물리적 특성과 입도분포 특징에 대한 정보는 천연 안료의 취급을 위한 기초자료로 활용될 수 있을 것이다.

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

에멀젼 건조법에 의한 Bi-2223 초전도 분말과 테이프 제조 (The Preparation of Bi-2223 Superconducting Powder and Tape by Emulsion Drying Method)

  • 장중철;이응상;이희균;홍계원
    • 한국세라믹학회지
    • /
    • 제34권2호
    • /
    • pp.115-122
    • /
    • 1997
  • 액상 분말 합성법 중의 하나인 에멀젼 건조 방법에 의한 분말 합성은 조성 조절이 용이하고 균질한 미립자 분말을 제조할 수 있는 장점을 지니고 있다. 에멀젼 건조법을 사용하여 합성 분체의 초기 형상과 입도를 제어하고 근본적으로 더욱 개선된 homogeneity를 얻었다. 에멀젼의 분리를 억제시킬 수 있는 계면활성제, 오일상 및 수용액의 혼합비를 조절함으로써 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 이 방법에 의하여 합성된 산화물 초전도체 분말의 특성 및 pellet으로 성형한 시편을 열처리하여 미세구조와 전기적 특성을 조사하였다. 또한, OPIT(Oxide Powder-in-tube)법에 의해 테이프를 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자크기는 1$\mu$m이하의 구형이었으나 대부분이 2~5$\mu$m크기로 응집되어 있었다. Ar분위기의 1/13atm 산소분압(Po2)에서 84$0^{\circ}C$로 72시간 동안 열처리한 덩어리형 시편의 임계저항온도는 108K이었으며, 1차와 2차 열처리한 테이프의 임계전류는 각각 0.4A와 1.5A이었다.

  • PDF

NF막 제조 및 응용공정 (Preparation and Application of Nanofiltration Membranes)

  • 이규호;오남운;제갈종건
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1998년도 제6회 하계 Workshop (98 한국막학회, 국립환경연구원 국제 Workshop, 수자원 보전과 막분리 공정)
    • /
    • pp.135-153
    • /
    • 1998
  • Nanofiltration (NF) is a recently introduced term in membrane separation. In 1988, Eriksson was one of the first authors using the word 'nanofiltration' explicitly. Some years before, FilmTech started to use this term for their NF50 membrane which was supposed to be a very loose reverse osmosis membrane or a very tight ultrafiltration membrane. Since then, this term has been introduced to indicate a specific boundary of membrane technology in between ultrafiltration and reverse osmosis. The application fields of the NF membranes are very broad as follows: Demeneralizing water, Cleaning up contaminated groundwater, Ultrapure water production, Treatment of effleunts containing heavy metals, Offshore oil platforms, Yeast production, Pulp and paper mills, Textile production, Electroless copper plating, Cheese whey production, Cyclodextrin production, Lactose production. The earliest NF membrane was made by Cadotte et al, using piperazine and trimesoyl chloride as monomers for the formation of polyamide active layer of the composite type membrane. They coated very thin interfacially potymerized polyamide on the surface of the microporous polysulfone supports. The NF membrane exhibited low rejections for monovalent anions (chloride) and high rejections for bivalent anions (sulphate). This membrane was called NS300. Some of the earliest NF membranes, like the NF40 membrane of FilmTech, the NTR7250 of Nitto-Denko and the UTC20 and UTC60 of Toray, are formed by a comparable synthesis route as the NS300 membrane. Commercially available NF membranes nowadays are as follows: ASP35 (Advanced Membrane Technology), MPF21; MPF32 (Kiryat Weizmann), UTC20; UTC60; UTC70; UTC90 (Toray), CTA-LP; TFCS (Fluid Systems), NF45; NF70 (FilmTec), BQ01; MX07; HG01; HG19; SX01; SX10 (Osmonics), 8040-LSY-PVDI (Hydranautics), NF CA30; NF PES 10 (Hoechst), WFN0505 (Stork Friesland). The typical ones among the commercially available NF membranes are polyamide composite membrane consisting of interfacially polymerized polyamide active layer and microporous support. While showing high water fluxes and high rejections of multivalent ions and small organic molecules, these membranes have relatively low chemical stability. These membranes have low chlorine tolerance and are unstable in acid or base solution. This chemical instability is appearing to be a big obstacle for their applications. To improve the chemical stability, we have tried, in this study, to prepare chemically stable NF membranes from PVA. The ionomers and interfacially polymerized polyamide were used for the modification of'the PVA membranes. For the detail study of the active layer, homogeneous NF membranes made only from active layer materials were prepared and for the high performance, composite type NF membranes were prepared by coating the active layer materials on microporous polysulfone supports.

  • PDF

TGA와 Py-GC/FID를 이용한 Al-MCM-48상에서 HDPE의 촉매(觸媒) 열분해(熱分解) (Catalytic decomposition of HDPE over Al-MCM-48 using TGA and Py-GC/FID)

  • 김영민;김승도;박영권;김지만;전종기
    • 자원리싸이클링
    • /
    • 제15권5호
    • /
    • pp.17-25
    • /
    • 2006
  • 본 연구는 Al-MCM-48을 이용하여 HDPE를 촉매 분해하는 것으로, Al-MCM-48의 촉매 활성을 Al-MCM-41, Beta, ZSM-5와 비교하였다. Al-MCM-48를 사용한 열분해 활성은 무촉매 열분해의 활성보다 매우 높았다. 다른 촉매와 비교했을 때 Al-MCM-48의 활성화 에너지는 거의 차이가 없었다. 촉매의 점진적인 비활성화 경향도 조사하였다. ZSM-5와 Al-MCM-48은 Al-MCM-41과 Beta보다 비활성화 경향이 낮았다. Py-GC/FID(pyrolyzer)를 이용하여 열분해 생성물의 특성에 대하여 분석하였다. 그 결과 ZSM-5 촉매를 사용한 경우에는 $C_1-C_4$ 범위의 기상 생성물이 많이 생성되었다. Al-MCM-41과 Beta를 사용한 경우에는 주로 $C_5-C_{12}$ 범위의 화합물이 생성되었다. Al-MCM-48은 다른 촉매들에 비해 $C_5-C_{22}$ 범위의 오일 생성물에 대해서 높은 선택도를 나타내었다.

튀긴 마늘 flake 제조조건의 최적화 및 이화학적 특성 (Optimization of Manufacturing Condition for Fried Garlic Flake and the Physicochemical Properties)

  • 김경이;이은경
    • 한국식품조리과학회지
    • /
    • 제28권6호
    • /
    • pp.805-811
    • /
    • 2012
  • This study was carried out in order to optimize the manufacturing condition of fried garlic flakes as well as to investigate the physicochemical properties of the flakes. Fried garlic flake samples were prepared as follows: garlic was sliced by a thickness of 1.5 mm, 2.0 mm, 2.5 mm, which were measured by a thickness gage. The samples were fried in vegetable oil under different temperatures of $140{\sim}150^{\circ}C$, $160{\sim}170^{\circ}C$ and $180{\sim}185^{\circ}C$. The compression strength depending on the height (h) was measured in order to find the thickness effect by the rheometer (force control: 50 N, h: 3.25 mm). Moreover, the sample with 1.5 mm thickness showed crisp phenomena of the split compared with the crush shape of the 2.0 mm and 2.5 mm thick samples. The result of strength for time dependence showed a sample with a thickness of 1.5 mm, which was measured 5~9 times more than the 2.0 mm and 2.5 mm thick samples. We thought the reason that the 1.5 mm sample had less response power equivalent to compression force than the other samples. Alliin has been found to affect the immune responses in the blood, it is a derivative of the amino acid cysteine and is also quite heat stable. The LC system with a UV detection at 210 nm consists of a separation on a Zorbax TMS column and isocratic elution with water and ACN as a mobile phase. The alliin contents of raw and fried garlic flake under $140{\sim}150^{\circ}C$, $160{\sim}170^{\circ}C$ and $180{\sim}185^{\circ}C$ were 18.10 mg/mL, 14.0 mg/mL, 11.6 mg/mL and 11.1 mg/mL, respectively. The decrement of alliin content under different temperature was a small quantity hence, we confirmed that the increasing manufacturing temperature was not affected by the alliin content. Examining for the particle structure of fried garlic flakes by a polarization microscope, the color of the sample treated at $160{\sim}170^{\circ}C$ was pure yellow. Furder, the fiber shaped particle, which has an effect on the tough texture, almost did not appear compared to the different temperature conditions. Finally, the sensory test for the preference of fried garlic flake under different conditions was carried out and the scores for various sensory characteristics were surveyed. According to the physicochemical measurements and sensory evaluation, we confirmed that the optimum manufacturing condition of fried garlic flake was 1.5 mm thick at a temperature of $160{\sim}170^{\circ}C$.

고압공기분사를 이용한 유류오염토양 세척기법의 적용성 연구 (Applicability of Washing Techniques Coupled with High-Pressure Air Jet for Petroleum-contaminated Soils)

  • 최상일;김강홍
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권6호
    • /
    • pp.61-68
    • /
    • 2006
  • 유류오염토양에 대한 고압공기분사를 이용한 세척기법의 적용성 연구를 위하여 저유소 주변의 실제 디젤오염토양을 사용하였으며 초기 오염농도는 $2,828{\pm}206\;mg/kg$으로 토양환경보전법상 가지역 우려기준 농도를 5배 이상 초과하였다. 세척공정의 기본 운전인자들에 대한 조건별 효율성 평가 및 최적조건 도출실험을 수행한 결과 효율적인 세척을 위하여 impeller는 편심 및 기울어진 중심에 위치하는 것이 가장 유리하였으며 교반속도는 높은 전단력(shear force)이 발생하는 고속교반조건(300 rpm)에서 세척효율이 가장 우수하였다. 교반시간은 10분이 효율성 및 경제성이 우수한 조건으로 판단되었으며 1차 반응속도식에서 도출된 교반속도별 속도상수들간 증가율 감소를 확인하여, 저속 교반조건(30, 60 rpm)에서도 추가적인 물리적 탈착력이 더해진다면 고속교반조건에서와 같은 제거효율을 얻을 수 있음을 알 수 있었다. 고압공기 분사에 따른 세척효율은 소수성(hydrophobic)의 토양표면 유류물질이 수중의 공기방울 표면에 강하게 부착(attracting)되어 제거됨을 확인하였고 공기압이 높아질수록 반응기내 공기유량이 증가되면서 오염물질의 부착율이 향상되었다. Impeller에 의한 교반과 고압공기 분사 혼합공정에서는 60 rpm, $2\;kg/cm^2$ 조건이 가장 효율적으로 판단되었다. 따라서 고압공기분사를 통한 토양세척기법은 유류오염토양 정화에 효율적 적용이 가능할 것으로 사료된다.

대리암형 백운석의 분체 특성과 충전재로서의 응용성 평가 (Characterization and assessment of the dolomite powder for application as fillers in the marble-type ore)

  • 노진환;이나경
    • 한국광물학회지
    • /
    • 제20권2호
    • /
    • pp.71-81
    • /
    • 2007
  • 접촉변성과 열수변질 작용이 중첩되어 형성된 자성 광산의 대리암형 백운석은 대개 98 wt.% 이상의 매우 높은 백운석 함유도를 보이는 고품위백운석으로서 부수적으로 석영, 백운모, 활철석과 같은 불순물을 미량 함유한다. 열수변질 산물로 여겨지는 황철석으로 인해 0.4 wt.% 정도의 상당히 높은 철분 함유 수준을 보이는 것이 특징이다. 대체로 백색을 띠는 이 백운석은 $0.35{\sim}0.46mm$의 결정 입도를 보이며 반자형의 등립상 조직을 이룬다. 이 백운석의 분체 특성은 전형적인 고품위석회석인 풍촌층 석회석에 비해 분쇄 효율, 미분체의 형성 및 입도 분포 면에서는 다소 우수한 것으로 나타난다. 또한 철분 함량을 제외하고는 기타 충전재로서의 품질상의 주요 요소들 즉, 백색도, 흡유율 및 비표면적은 물론 신장비, 형상비, 구형도와 같은 형상 특성 면에서도 결코 뒤떨어지지 않는 분체 특성을 보인다. 이 같은 자성 백운석의 양호한 분체 특성은 원광에서의 기본적으로 높은 백운석 함유도와 비교적 높은 결정도에 기인한 것으로 여겨진다. 이 백운석은 비교적 높은 철분 함량과 황화광물의 혼재로 인해서 금속제련용을 제외한 소성용 용도로는 적합하지 않은 것으로 판단된다. 그렇지만 적절한 선광 공정이 적용된다면 현재 중탄용 석회석이 차지하고 있는 대부분의 충전재 응용 부문에서는 고품위석회석의 대체재로써 충분히 활용이 가능할 것으로 평가된다.