• Journal of Soil and Groundwater Environment
• /
• v.20 no.5
• /
• pp.26-33
• /
• 2015

Batch experiments were performed to investigate the feasibility of a surfactant-enhanced soil washing process for soils heavily contaminated with crude oil in Kuwait. TPH concentration of the contaminated soil was 223,754 mg/kg, sampled from the bottom of a vaporized oil extraction pond in the Burgan reservoir field. Commercialized eight nonionic surfactants (Tween and Tergitol series) were used to measure the aqueous solubility for the crude oil. Among them, two Tergitol surfactants were used to evaluate the TPH removal efficiency of the surfactant-enhanced soil washing for heavily contaminated Kuwait soil. The solubility of the crude oil in surfactant solution was in the order Tergitol 15-S-7 > Tergitol 15-S-9 > Tergitol 15-S-12 > Tween-80 > Tween-20 > Tween-60, which showed that the crude oil solubilities of the Tergitol series were higher than those of the Tween series. The TPH removal efficiencies of 2% and 5% Tergitol 15-S-9 solution were 59% and 65%, respectively. Because the residual TPH concentration in the washed soil was still higher than the clean-up level (10,000 mg/kg), the soil washing process was repeated five times. After the fifth washing, the residual TPH concentration in the soil went down to 7,680 mg/kg and its removal efficiency was 97%.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2934-2939
• /
• 2008

We conducted a test of a direct burning of crude Jatropha oil (CJO) in a commercial boiler system. The fuel, crude Jatropha oil is not biodiesel which comes from transeterification process of bio oil, but it is pure plant oil. The higher heating value (HHV) of the CJO is 39.3 MJ/kg (9,380 kcal/kg) and is higher than that of a commercial heating oil, 37.9 MJ/kg. The kinematic viscosity of CJO is 36.2 mm2/s at $40^{\circ}C$ and 8.0 mm2/s at $100^{\circ}C$. The burner used in the test is a commercial burner for a commercial heatingoil and its capacity is 140 kW (120,000 kcal/h). We did a preliminary test whether the combustion is stable or not. The preliminary test was a kind of open air combustion test using the commercial burner with crude Jatropha oil. We found that the combustion can be stable if the crude Jatrophaoil temperature is higher than $90^{\circ}C$. We measured the flue gas concentration by using a gas analyzer. The NOx concentration is $80{\sim}100\;ppm$ and CO concentration is nearly 0 ppm at flue gas O2 concentration of 3.0 and 4.5%.

• Journal of the Korean Home Economics Association
• /
• v.24 no.1
• /
• pp.59-64
• /
• 1986

The contents of proximate components of the polished adn unpolished Job's tears, Coix agrestis, were determined. And also the phisical and the chemical properties of fatty acids composition and the oxidative rancidity of the crude oil extracted from Job's tears were examined. RESULTS : 1.The contnets of moisture, total ash, crude protein, crude fat, and carbohydrate in Job's tears were shown to be about 9.2%, 2.1~5.0%, 19.5~20.8%, 3.7~7.2%, 60.7~67.0%. 2. The average values of specific gravity, refractive index iodine value, saponification value, acid value of the crude oil extracted from Job's tears were 0.917~0.920, 1.47574, 107~111, 198~199, 1.3~2.0, respectively. 3. The fatty acids composition in the crude Job's tears oil showed oleic acid 48.97~49.97%, linoleic acid 37.33~36.16%, palmitic acid 13.70~13.87%. 4. Generally, the peroxide values and thiobarbituric acid values of the Job's tears oils and control during 40 storage days at 40±1℃ showed very low increase. After 32 days, the peroxide values and TBA values of soybean oil showed higher than those of the Job's tears oils. Conclusively, the Job's tears oils were shown to be more stable than the soybean oil.

• Journal of Information Processing Systems
• /
• v.20 no.3
• /
• pp.399-408
• /
• 2024

The moisture content of crude oil notably affects various aspects of oil production, storage, transportation, and exploration. However, accurately measuring this moisture content is challenging because of numerous influencing factors, leading to a lack of precision in existing detection methods. This inadequacy hinders the progress of China's petroleum industry. To overcome these challenges, this paper proposes a conductivity-based method for measuring crude oil moisture content. By employing an embedded system, we designed a sensor comprising five electrodes. Additionally, we developed signal excitation and signal processing circuits. Moreover, a software program was designed to analyze and compute the output signal using fast Fourier transform operations. This facilitated the identification of flow patterns, computation of relevant flow rates, and establishment of correlation rates based on frequency spectral characteristics. Based on experimental results, we established a functional relationship between measurement parameters and crude oil moisture content. This study enhanced the precision of moisture content measurement, thereby addressing existing limitations and fostering the advancement of China's petroleum industry.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.1
• /
• pp.25-34
• /
• 2000

A panoramic-PIV technique is employed to characterize the travelling tip vortices and the profile of oil-water Interface in the tandem fence arrangement. Instantaneous as well as time-averaged velocity profiles of the water layer close to the interface were obtained to evaluate the possibility of measuring the shear stress distribution on oil-water interface. It was proven that the present technique could provide some qualify data precise enough to resolve detailed flow structures inside a shear layer formed on oil-water interface provided it is nearly stationary.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1371-1374
• /
• 1995

It is well known that the degradation of transformer oil conseqently lead to the failure of transformer. This paper discussed the characteristics of the degradation sensor checking transformer oil condition in live line. The degadation sensor is composed of base ring, electrodes and porous ceramic, passed through the transformer oil and checks the transformer oil condition through sensor's leakage current. So it is important to minimize the leakage current of base ring and connection parts. To investigate the leakage current of base ring and connection parts the characteristics of V-T-I and DC 2 KV and other examinations were performed. It is verified that ionized transformer oil caused by the expansion of temperature increases in the leakage current of porous ceramic sensor. It is certification that the leakage current of other parts of porous ceramic is very small(about 2%) compared with the porous ceramic body and it is confirmed that the leakage current in porous ceramic is changed sensitively according to the new oil(NO) and and the degradation oil(DO).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.95-102
• /
• 1999

Various types of oil response equipments and oil recovery vessels are being developed in Korea from the 1990s to respond nil spill accidents. It should be considered prior to the selection of the oil skimmers to make the oil recovery system more efficient at early stage of oil spill accidents. Rotating baldes of vortex skimmer beneath the water surface concentrate oil and draw it into the weir, where it flows to a collection sump. In this study a recently developed Vortex-Disc skimmer(model : VDS-50) is introduced and the performance test results for the skimmer are discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.67-78
• /
• 1999

Recently, a greater part of all ship use a coarse heavy fuel oil(HFO) over specific gravity(S.G) 1.00/15$^{\circ}C$ and viscosity 3,500 cSt/4$0^{\circ}C$ as the fuel oil of marine boiler or internal combustion engine from the viewpoint of economical ship' operation. The greater plan to improve a combustion methods of heavy fuel oil, such as atomization, homogeneity and emulsification, were contrived and carried out newly, and then applied 20kHz ultrasonic homogenizer to one of test methods. Also, adopted the marine oils(fuel oil and lubricating oil etc.) and sludge oil as test solutions, and its matrix structures were examined with photographs, Especially, it is important at control system of oil pollution, for the sludge oil emulsified, to be recycled as fuel oil of boiler according to 20kHz Ultrasonic homozenizer, and then fuel saving is attained effectively by making sludge oil to be burnt.

• KSTLE International Journal
• /
• v.10 no.1_2
• /
• pp.6-12
• /
• 2009

In this study, the effect of oil supply conditions on the dynamic performance of a hydrodynamic journal bearing is analyzed numerically. Axial length, circumferential length and location of oil grooves are considered as oil supply conditions. The perturbation equations of the perturbed film contents are obtained by applying Elrod's universal equation implementing JFO film rupture / reformation boundary conditions to Lund's infinitesimal perturbation method. The dynamic coefficients of a hydrodynamic journal bearing are calculated by solving the perturbation equations, and the linear stability analysis is carried out by using those for a variety of oil supply conditions.

• Journal of Fashion Business
• /
• v.25 no.4
• /
• pp.1-13
• /
• 2021

As interest in skin care increases, this study aims to contribute to the development of the beauty self-care market by providing basic data through the measurement of the oil and moisture skin condition of women in their 20s and 30s. The study was conducted from November 27, 2020 to January 31, 2021, with 20 women in their 20s and 30s divided into 4 groups, A~D, by age, 5 per group. Skin measurements were taken four times at 4 hour intervals at 0H, 4H, 8H, and 12H based on the first measurement that was taken within 30 minutes after waking up, and the oil and moisture indices were observed over time. As a result, both T and U zones showed significant differences in moisture levels over time, with no difference between groups for both T and U zones. Moisture decreased the most between 0H to 4H, and moisture changed the least between 4H to 8H. Changes in moisture increased the similar at 0H and 12H. The oil condition changed more irregularly compared to moisture over time, but all groups showed lower oil content in the U-zone compared to the T-zone. Overall, the facial oil and moisture conditions of women in their 20s and 30s changed over time, indicating that the skin changes in real time. The fact that the skin data, which was measured in the primary activity living environment, can be used as basic research data in the beauty self-care market is meaningful.