• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.746-752
• /
• 2018

In this study, an optimized process for the waste cooking oil based biodiesel production using microwave energy was designed by using Box-Behnken design model. The process variables were chosen as a mole ratio of the methanol to oil, microwave power, and reaction time. Fatty acid methyl ester (FAME) content was then measured. Through the results of basic experiments, the range of optimum operation variables for the Box-Behnken design model, such as the methanol/oil mole ratio and reaction time, were set as between 8 to 10 and between 4 to 6 min, respectively. Ranges of the microwave power were set as from 8 to 12 W/g for 1.30 mg of KOH/g, acid value, while from 10 to 14 W/g for 2.00 mg of KOH/g, acid value. The optimum methanol/oil mole ratio, microwave power, and reaction time were reduced to 7.58, 10.26 W/g, and 5.1 min, respectively, for 1.30 mg KOH/g of acid value. Also, the optimum methanol/oil mole ratio, microwave power, and reaction time were 7.78, 12.18 W/g, and 5.1 min, respectively, for 2.00 mg KOH/g of acid value. Predicted FAME contents were 98.4% and 96.3%, with error rates of less than 0.3%. Therefore, when the optimized process of biodiesel production using microwave energy was applied to the Box-Behnken design model, the low error rate could be obtained.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2000

A new alternative for large deepwater field development is described. This "Oil Box" (aka "Box Spar") is a multifunction vessel capable of floating drilling, production, storage and offloading (FDPSO). It is distinguished from other Floating Production, Storage and Offloading (FPSO) vessels by its unique hull form and oil storage system. It's main advantages are flexibility derived from the floatover deck option, use of proven top tensioned riser technology, and motion characteristics which make it operable in a wide range of environmental conditions.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.284-288
• /
• 2001

Lipid emulsions with saturated triacylglycerols (TAGs) with 4 to 10 carbons in each acyl chain were prepared to study how the oil component alters the stability of the lipid emul-sions when phosphatidylcholines were used as emulsifiers. The average droplet size of the emul-sions became smaller as the chain length of the TAG increased. For a given oil emulsion with smaller droplets was formed with an emulsifier having higher HLB value. The influence of HLB values on the droplet size was biggest for the tributyrin (C4) emulsion. For the tricaprylin(C8) emulsions, droplet size was identical at given emulsifier concentrations regardless of HLB values. The HLB value and the concentration of the emulsifiers also affect the droplet size of the emul-sions. The emulsions with smaller average droplet size were more stable than with bigger size for 20 days. The oil and water (o/w) interfacial tension in inversely proportional to the initial droplet size of the emulsion.

• Journal of the Korean Professional Engineers Association
• /
• v.45 no.6
• /
• pp.28-32
• /
• 2012

Namhae chemical is one of the largest fertilizer manufacturing company in Korea which company has operating 4 unit agitator gear boxes and producing variety kinds of fertilizer production. The gearbox operating temperature of agitator is approximated in $55^{\circ}C{\sim}90^{\circ}C$ and required to keep operating continuous without stopping. The system required high performance oil and longer oil drain interval as limited workforce in maintenance team. It was lubricated by mineral gear oil of ISO VG 320 and also need to change to new oil frequently. Namhae Chemical would expect to keep stable operating condition without shut down and consider, lower cost of operation and equipment protection.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.711-717
• /
• 2019

The application of advanced oxidation for the treatment of oil refinery wastewater under UV radiation by using nanoparticles of titanium dioxide was investigated. Synthetic wastewater prepared from phenol crystals; Power Glide SAE40 motor vehicle oil and water was used. Response surface methodology (RSM) based on the Box-Behnken design was employed to design the experimental runs, optimize and study the interaction effects of the operating parameters including catalyst concentration, run time and airflow rate to maximize the degradation of oil (SOG) and phenol. The analysis of variance and the response models developed were used to evaluate the data obtained at a 95% confidence level. The use of the RSM demonstrated the graphical relationship that exists between individual factors and their interactive effects on the response, as compared to the one factor at time approach. The obtained optimum conditions of photocatalytic degradation are the catalyst concentration of 2 g/L, the run time of 30 min and the airflow rate of 1.04 L/min. Under the optimum conditions, a 68% desirability performance was obtained, representing 81% and 66% of SOG and phenol degradability, respectively. Thus, the hydrocarbon oils were readily degradable, while the phenols were more resistant to photocatalytic degradation.

• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

The purpose of this paper is to study and analyze the failure examples on tribological characteristics of an automotive steering system. In this failure study, the grease leakage may stick leaked grease, dust, and wear particles between pinion and rack gears in mechanical steering system. In the case of seal failures such as a rod seal, o-ring and oil seals, the gear box and oil pump do not operate properly due to lack of oils. This means that oil pump does not supply a working fluid and produce a normal oil pressure of the steering system. This leads to leak a working fluid from the seals and produce a wear between pinion and rack gears. Especially, the leaked oil is usually mixed with internal wear particles and foreign dust/fine sands. Thus no leakage of working oils is very important design concepts, which is strongly related to the sealing components and smoothly operating of the mechanical friction parts of power steering system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.46-50
• /
• 2016

When rotating the clutch drum in the power take-off (PTO) gear box of an armored recovery vehicle, lots of inner oil is drained through the adapter by centrifugal force. Therefore, a lack of lubrication is caused by inner oil loss, and the bearing is damaged by overheating. This study, therefore, aims to design an oil-controlling adapter by using shape alteration to prevent oil loss. Both the original and improved adapters were tested at 1,800rpm by using an operational test machine. When applying the original adapter to the gear box, the bearing was damaged by overheating, which was caused by the lack of lubrication. When applying the improved oil-controlling adapter, on the other hand, it prevented the loss of inner oil. Applying the improved adapter is expected to prevent the overheating caused by lack of lubrication.

• Environmental and Resource Economics Review
• /
• v.30 no.4
• /
• pp.535-555
• /
• 2021

This study empirically analyzes the effects of international oil prices on domestic stock market volatility. The data used for the analysis are 10-minute high-frequency data of the KOSPI index and WTI futures price from January 2, 2015, to July 30, 2021. For using the high-frequency data, a heterogeneous autoregression (HAR) model is employed. The analysis model utilizes the advantages of high frequency data to observe the impact of international oil prices through realized volatility, realized skewness, and kurtosis as well as oil price return. In the estimation, the Box-Cox transformation is applied in consideration of the distribution of realized volatility with high skewness. As a result, it finds that the daily return fluctuation of the WTI price has a statistically significant positive (+) effect on the volatility of the KOSPI return. However, the volatility, skewness, and kurtosis of the WTI return do not appear to affect the volatility of the KOSPI return. This result is believed to be because the volatility of the KOSPI return reflects the daily change in the WTI return, but does not reflect the intraday trading behavior of investors.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.175-180
• /
• 2018

Box-Behnken Design (BBD) under response surface methodology (RSM) was implemented to optimization the operating parameters and assess the removal and recovery efficiencies of crude oil from contaminated soil using subcritical water extraction. The effects of temperature, extraction time and water flow rate were explored, and the results indicate that temperature has a great impact on crude oil removal and recovery. The correlation coefficients for oil removal ($R^2=0.74$) and recovery ($R^2=0.98$) suggest that the proposed quadratic model is useful. When setting the target removal and recovery (>99%), BBD-RSM determined the optimum condition to be a temperature of $250^{\circ}C$, extraction time of 120 min, and water flow rate of 1 mL/min. An experiment was carried out to confirm the results, with removal and recovery efficiencies of 99.69% and 87.33%, respectively. This result indicates that BBD is a suitable method to optimize the process variables for crude oil removal and recovery from contaminated soil.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.435-440
• /
• 2018

Nyamplung (Calophyllum inophyllum Linn) is one of the most widely grown plants in Indonesia. In addition, nyamplung oil has a future competitive advantage in that it can be processed into biodiesel. However, conventional methods for transesterification of nyamplung oil have been less effective. Therefore, in this study biodiesel was produced using microwaves as one of the alternative methods that can improve the shortcomings of conventional methods. In addition, optimization of parameters such as microwave power, catalyst concentration and transesterification time was done using Box-Behnken design. The combination of microwave with CaO catalyst and treated with Box-Behnken design are considered as a new and modern method for production of biodiesel from nyamplung oil and optimizing the factors that affected the transesterification process. The results showed that factors such as microwave power of 449.29 W, concentration of catalyst of 4.86% and transesterification time of 10.07 min can produce optimal yield of biodiesel of 92.73% with reliability of 93.22%.