• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.311-317
• /
• 2005

It has been the most progressive interruption technique to use the ablation gas from the surface of PTFE nozzle driven by arc plasma during switching process in $SF_6$ gas circuit breakers. This advanced interruption technique can reduce the required mechanical energy to compress and blow the gas for extinguishing the arc plasma between the electrodes due to using the ablation effect instead. In order to consider the phenomena during calculation of switching process, it is required to confirm the principles of ablation from PTFE nozzle as well as of arc plasma during switching process. In this study, we have calculated the switching process considered the ablation of PTFE nozzle driven by arc plasma using multidisciplinary simulation technique and compared the results with the data without the ablation effect. More $50\%$ difference of pressure rise inside expansion chamber has been found from the results and it should be indispensable for this type of computational work to consider and include the ablation effect of PTFE nozzle. Further study on turbulence and radiation will be followed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.365-368
• /
• 2002

The design of industrial arc plasma systems is still largely based on trial and error although the situation is rapidly improving because of the available computational power at a cost which is still fast coming down. The desire to predict the behavior of arc plasma system, thus reducing the development cost, has been the motivation of arc research. To interrupt fault current, the most enormous duty of a circuit breaker, is achieved by separating two contacts in a interruption medium, $SF_{6}$ gas or air etc., and arc plasma is inevitably established between the contacts. The arc must be controlled and interrupted at an appropriate current zero. In order to analyze arc behavior in $SF_{6}$ gas circuit breakers, a numerical calculation method combined with flow field and electromagnetic field has been developed. The method has been applied to model arc generated in the Aachen nozzle and compared the results with the experimental results. Next, we have simulated the unsteady flow characteristics to be induced by arcing of AC cycle, and conformed that the method can predict arc behavior in account of thermal transport to $SF_{6}$ gas around the arc, such as increase of arc voltage near current zero and dependency of arc radius on arc current to maintain constant arc current density.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.34-34
• /
• 1999

토카막(Tokamak)에서는 플라즈마(plasma)로 불순불(impurity)의 유입을 방지하기 위해 고진공을 유지해야 하며 이를 위해 가열탈리(backing), 방전세정(discharge codanning) 등 wall conditioning이 기본적으로 요구된다. KT-1 토카막은 실험실 이전에 따른 해체로 인해 진공용기(vacuum vessel) 가 대기압 하에 수개월 동안 노출되어 있었기 때문에 재조립 후 가열 탈 리가 필수적이나 진공용기의 외부에 saddle loop coil을 비롯해 Rogowski, diamagnetic coil, poloidal field coil 등 많은 magnetic pick up coil 들이 설치되어 있어 열선 등 일반적인 방법으로 가열 탈 리가 어려운 상황이다. 따라서 KT-1 토카막에서는 전자석 코일에 상전원을 부가하였을 때 진공용기에 발생하는 유도가열 (inductive heatin)을 이용해 가열 탈리를 시도하였다. 유도 가열 탈리(inductive backing)는 토로이달 자장 코일(toroidal field coil)과 가열 저장 모일(ohmic heating coil)을 각각 이용하여 코일의 온도가 6$0^{\circ}C$ 이하가 유지되는 코일 전류 범위내에서 수행하였으며 먼저 이 둥 경우에 있어서 진공용기의 온도분포를 비교하엿다. 그리고 가열 탈리 기간 및 그 전, 후의 진공압력과 잔류기체 분압을 측정, 분석하였다. 유도가열에 의한 방법으로 KT-1 토카막에서 얻은 탈리온도는 12$0^{\circ}C$정도로 비교적 낮았으나 탈리 시간을 연장하여 탈리효과를 어느 정도 보상할 수 있으며 일반적인 가열 탈리가 여려운 경우 유도 가열 탈 리가 채택될 수 있는 또 하나의 방법이라 볼 수 있다.

• 설비공학논문집
• /
• 제17권8호
• /
• pp.764-771
• /
• 2005

A theoretical investigation for optimization of conduction-cooled Peltier current leads is undertaken. A Pottier current lead (PCL) is composed of a thermoelectric element (TE), a metallic lead and a high Tc superconductor (HTS) lead in the order of decreasing thermoelectric tempera ture. Mathematical expression for the minimum heat flow per unit current crossing the TE metal interface and that flowing from the metal lead to the joint of the metal and the HTS leads are obtained. It is shown that the temperature at the TE-metal interface possesses a unique optimal value that minimizes the heat flow to the joint and that this optimal value depends on the material properties of the 73 and the metallic lead but not the joint temperature nor electric current. It is also shown that there exists a unique optimal value for the joint temperature between the metal and the HTS leads that minimizes the sum of the power dissipated by ohmic heating in current leads and the refrigerator power consumed to cool the lead, for a given length of the HTS.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.543-550
• /
• 2011

Conductive SiC-$ZrB_2$ composites were produced by subjecting a 40:60 (vol%) mixture of zirconium diboride (ZrB2) powder and ${\beta}$-silicon carbide (SiC) matrix to spark plasma sintering (SPS). Sintering was carried out for 5 min in an argon atmosphere at a uniaxial pressure and temperature of 50 MPa and $1500^{\circ}C$, respectively. The composite sintered at a heating speed of $25^{\circ}C$/min and an on/off pulse sequence of 12:2 was denoted as SZ12L. Composites SZ12H, SZ48H, and SZ10H were obtained by sintering at a heating speed of $100^{\circ}C$/min and at on/off pulse sequences of 12:2, 48:8, and 10:9, respectively. The physical, electrical, and mechanical properties of the SiC-$ZrB_2$ composites were examined and thermal image analysis of the composites was performed. The apparent porosities of SZ12L, SZ12H, SZ48H, and SZ10H were 13.35%, 0.60%, 12.28%, and 9.75%, respectively. At room temperature, SZ12L had the lowest flexural strength (286.90 MPa), whereas SZ12H had the highest flexural strength (1011.34 MPa). Between room temperature and $500^{\circ}C$, the SiC-$ZrB_2$ composites had a positive temperature coefficient of resistance (PTCR) and linear V-I characteristics. SZ12H had the lowest PTCR and highest electrical resistivity among all the composites. The optimum SPS conditions for the production of energy-friendly SiC-$ZrB_2$ composites are as follows: 1) an argon atmosphere, 2) a constant pressure of 50 MPa throughout the sintering process, 3) an on/off pulse sequence of 12:2 (pulse duration: 2.78 ms), and 4) a final sintering temperature of $1500^{\circ}C$ at a speed of $100^{\circ}C$/min and sintering for 5 min at $1500^{\circ}C$.

• 동의생리병리학회지
• /
• 제27권4호
• /
• pp.367-373
• /
• 2013

The purpose of this study was to analyze the patent application trend in the processing technology for medicinal herbs. Recently, in processing technology for medicinal herbs, experimental researches have frequently been published through papers in journals. However, the research results about the patent area were fewer than the others. We tried to analyze the patent application trend in nonthermal processing technologies for medicinal herbs by country as Korea, Japan, U.S.A. and Europe. The detailed technologies consisted of pulsed electric field, oscillatory magnetic field, intense pulsed light, ultrasonification, high hydrostatic pressure, microwave, radiation, Ohmic heating, and supercritical extraction. As a result we found that patents of nonthermal processing technologies has been growing steadily in quantity from 1980s and growing quickly since 2000s. The number of patent in Korea is larger than others as making up 70% in that whole. The number of patent in ultrasonification field was larger than others in portfolio analysis. Patent application trend in nonthermal processing technologies for ingestion occupies high share compared to other usage applications. In conclusion, patent trends of nonthermal processing technologies for medicinal herbs belong to the period in the development.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권2호
• /
• pp.138-144
• /
• 1994

Electrical conduction phenomena of $C_{22}$-quinolium(TCNQ) Langmuir- Blodgett(LB) films are reported through a study of current-voltage(I-V) characteristics along a perpendicular direction. The I-V characteristics were investigated by applying a step or a pulse voltage to the specimen as well as changing temperatures in the range of 20-250[.deg. C] It show an ohmic behavior in low-electric field, and a nonohmic behavior in high-electric field. This nonohmic behavior has been interpreted in terms of a conduction mechanism of space-charge limited current and Schottky effect. When the electric field is near the strength of 10$_{6}$ V/cm, there occur anomalous phenomena similar to breakdown. When step or pulse voltage is applied, the breakdown voltage shifts to the higher one as the step or pulse time width becomes shorter. To see the influence of temperature, current was measured as a function of temperature under the several bias voltages, which are lower than that of breakdown. It shows that the current increases to about 103 times near 60-70[.deg. C], and remains constant for a while up to around 150[.deg. C] and then suddenly drops. We have also performed a DSC(differential scanning calorimetry) measurement with $C_{22}$-quinolium(TCNQ) powder in the range of 30-300[.deg. C]. These results imply that the anomalous phenomena occuring in the high electric field are caused by the electrical and internal thermal effect such as a joule heating.ating.

• 한국식품과학회지
• /
• 제26권5호
• /
• pp.596-602
• /
• 1994

국내에서 재배량 및 생산량이 가장 많은 장마로부터 마의 점질물을 농축시키기 위한 건조조건, 초미세분쇄 조건 및 공기분급조건을 조사하였다. 마의 건조는 동결 건조방법이 마 고유의 색 및 점실물을 보존시킬 수 있는 가장 좋은 방법이었으며, 열풍건조시 $40^{\circ}C,\;70^{\circ}C,\;80^{\circ}C$등의 건조온도에서는 갈변과 점성이 소실되는 현상이 심하여 $50^{\circ}C$ 정도의 건조온도가 적당한 것으로 나타났다. 동결건조하여 초미세분쇄된 마의 공기분급시 ACWS가 높은 분획으로 갈수록 식이섬유, 단백질 및 지방 함량이 급격히 증가하였다. 특히 ACWS 15,000rpm을 기준으로 비교하면 분급하지 않은 마 분말보다 식이섬유와 단백질 함량이 $2.5{\sim}9.0$배 정도 농축되는 결과를 보여주었다. 탄수화물의 함량은 ACWS가 증가할수록 88.31%에서 16.84%로 감소하여 분급하는 ACWS에 따라 성분들의 분리가 일어나고 있음을 확인할 수 있었다. ACWS 15,000rpm 이상의 분획들의 WSI와 WAI는 그 이하의 분획들보다 $1.5{\sim}3.0$배 이상 높았으며, 입자의 모양과 크기도 구형이 아닌 $15{\mu}m$ 이하의 부정형의 작은 입자들로 구성되어 있었다. 전단 속도 1000l/s로 에서의 겉보기점도의 경우 ACWS 15,000rpm 이상의 분획은 0.0800 Pa s이었고, 그 이하의 분획은 0.0080 Pa s로 나타나 10배 정도 점질물이 농축되었다. 이와같은 결과를 종합해보면 마로부터 점질물을 분리, 농축하기 위해서는 마를 동결건조하고 $5{\sim}30{\mu}m$크기의 입자로 초미세분쇄한 뒤 ACWS 15,000 rpm 이상으로 공기분급을 실시하면 가능한 것으로 판단되었다.심부근 보다 5${\sim}10^{\circ}C$ 높았으므로 적절한 주파수의 선정이 중요하였다. 5. 고추장과 된장의 수분함량이 습량 기준으로 30% 이하일 때는 전류가 흐르지 않아 Ohmic heating의 적용이 불가능 하였으나, 30% 이상에서는 수분함량의 증가에 따라 가열속도는 급속히 증가하였다.하였다. 6. 수분(水分) potential 엽수분함량(葉水分含量)이 동일(同一)한 조건(條件)에서 콩보다 인삼(人蔘)이 낮았으며, 수분(水分) potential과 광합성(光合成) 및 기공식도도(氣孔傳導度)와는 고도(高度)의 정(正)의 상관(相關)이있었다. 7. 이상(以上)의 결과(結果)를 종합(綜合)해 볼 때, 인삼(人蔘)의 광합성(光合成)이 타식물(他植物)보다 낮은 것은 기공식도도(氣孔傳導度)와 수분(水分) potential이 낮은 것과도 밀접(密接)한 관계(關係)가 있을 것으로 생각된다.g\;/\;\ell$ 처리(處理)의 대부분(大部分)이 주당(株當) 본수(本數)가 거의 1개체(個體) 정도(程度)이도 발육상태(發育狀態)도 불량(不良)하였으나 NAA $4mg\;/\;\ell\;Kinetin\;2mg\;/\;\ell$ 그리고 활성탄(活性炭) $1g\;/\;\ell$ 첨가처리(添加處理)에서 만이 주당(株當) 본수(本數)가 2.3개이고 개체당(個體當) 발근수(發根數)가 월등(越等)히 많았다. 5. 실험결과(實驗結果) 마 경절편(莖節片) 배양(培養)의 Shoot유가(誘起)에 가장 효과적(效果的)인 배지(培地)는 1/8MS+1AA $2mg\;/\;\ell+Kinetin\;2mg\;/\;\ell$+활성탄(活性炭) $1g\;/\;\ell$ 이였으며, White+NAA $4mg\;/\;\ell+Kinetin\;2mg\;/\;\ell$+활성탄(活性炭)