• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.265-272
• /
• 2002

Spatial distribution of Phytoplankton Pigment Concentration (PPC) and Sea Surface Temperature (SST) around the East Korean Warm Current (EKWC) was described, using both Coastal Zone Color Scanner (CZCS) images and Advanced Very High Resolution Radiometer (AVHRR) images in May, 1980. Water mass in this region can be classified into five categories in the horizontal profile of PPC and SST, nLw (normalized water-leaving radiance) images: (1) coastal cold water region associated with concentrations of dissolved organic material or yellow colored substances and suspended sediments, (2) cold water region of thermal frontal occurred by a combination of phytoplankton absorption and suspended materials, (3) warm water overlay region by the phytoplankton absorption than the suspended materials; (4) warm water region occurred by the low phytoplankton absorption, and (5) offshore region occurred by the high phytoplankton absorption. In particular, the highest PPC (>2.0 mg/m^3) area appeared in the CZCS and AVHRR images with a band shaped distribution of the thermal front and ocean color front region, which is located the coastal cold waters alonB western thermal front of the warm streamer of the EKWC. In this region, the highest PPC occurred by a combination of the high absorption of the phytoplankton (443 nm) and highest reflectance of suspended materials (550 nm). Another high PPC ($\simeq$$6\;mg/m^3$) appeared in the warm water overlay region inside warm streamer. High phytoplankton pigment concentration of this region was corresponding to the short wavelength of 443 nm, which represented phytoplankton absorption of the CZCS image.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.203-215
• /
• 2006

Field observations on the spatio-temporal distribution of organic matter of the surface sediment were carried out at 15 stations in the central parts of the South Sea of Korea from April 2002 to January 2003. The range of water temperature and salinity in bottom waters, mud content and water content of surface sediment were $8.06{\sim}23.35^{\circ}C,\;29.20{\sim}34.51\;psu,\;71.2{\sim}99.9%$ and $38.7{\sim}68.9%$, respectively. Measured parameters on the surface sediments of ignition loss (IL), chemical oxygen demand (CODs), phaeopigment, particulate organic carbon (POC) and particulate organic nitrogen (PON) also ranged in $3.9{\sim}l2.5%,\;9.60{\sim}44.05\;mgO_2/g-dry,\;1.58{\sim}29.51\;{\mu}g/g-dry,\;3.12{\sim}13.01\;mgC/g-dry$ and $0.49{\sim}2.00\;mgN/g-dry$, respectively. The spatio-temporal distribution of organic matter demonstrated higher concentrations offshore than at lesions near the coastal line. Higher concentrations occurred in the summer and spring. The results indicated that the origin of organic matter in surface sediments in the central part of the South Sea was autochthonous rather than allocthonous because the organic matter had an average C/N ratio of 6.44 (${\pm}0.51$). However, the composition of autochthonous organic matter was mainly derived from detritus rather than living phytoplankton, which was Indicated by the results of the POC/phaeopigment ratio. A principal component analysis (PCA) indicated that 73.2% of the variability in the data was described by two factors: 1) an 'environmental factor concerning the accumulation of materials (57.3%)' and 2) 'origin of organic matter and the composition by primary production (15.9%)'. The sedimentary environment in the central part of the South Sea was divided into four regions from the factor score of the PCA by the concentrations of organic matter and the composition ratio of organic matters from phytoplankton in surface sediments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.1-11
• /
• 1983

Data on the trawl operation was compiled from the Korea stern trawlers operated in the sea off the Sahara coast of Africa from May 1975 to April 1976. The distribution of some important demersal fishes were investigated by calculating the catch per haul in every fishing ground sections divided by every fishing ground sections divided by every 30' of latitude and longitude. The results obtained are as follows; 1. The mean catch per haul calculated as: squid 14.9kg, large cuttlefish 29.9kg, small cuttlefish 37.8kg, octopus 44.1kg, sole 8.0kg, seabream 9.3kg and miscellaneous fishes 63.1kg. Where cuttlefish is divided into two sizes, large or small by if it weighs over 300kg or not. 2. Squid were caught mostly from August to November in the northern part of 24$^{\circ}$30'N and southern part of 23$^{\circ}$30'N. 3. Large cuttlefish were caught mostly from December to May of the next year, in the coast from 23$^{\circ}$00'N to 25$^{\circ}$00'N, where as small cuttlefish were caught mostly from April to June and from November to January of next year, in the coast from 23$^{\circ}$30'N to 25$^{\circ}$00'N. 4. Octopus were caught mostly from September to January of the next year and from March to April. in the coast from 23$^{\circ}$00'N to 25$^{\circ}$00'N rather in the offshore than in the near coast. 5. Miscellaneous fishes including seabream were caught from May to November, sole from June to November and the others from May to October.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.330-338
• /
• 2018

The proportional-integral-derivative(PID) controller has been widely used in the industry because of its robust performance and simple structure in a wide range of operating conditions. However, the AVR(Automatic Voltage Regulator) as a control system is not robust to variations of the power system parameters. Therefore, it is necessary to use PID controller to increase the stability and performance of the AVR system. In this paper, a novel design method for determining the optimal PID controller parameters of an AVR system using the particle swarm optimization(PSO) algorithm is presented. The proposed approach has superior features, including easy implementation, stable convergence characteristic and good computational efficiency. In order to assist estimating the performance of the proposed PSO-PID controller, a new performance criterion function is also defined. This evaluation function is intended to reflect when the maximum percentage overshoot, the settling time are given as design specifications. The ITAE evaluation function should impose a penalty if the design specifications are violated, so that the PSO algorithm satisfies the specifications when searching for the PID controller parameter. Finally, through the computer simulations, the proposed PSO-PID controller not only satisfies the given design specifications for the terminal voltage step response, but also shows better control performance than other similar recent studies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.600-606
• /
• 2016

Seafarers are often placed in circumstances that require emergency evacuations due to various causes, including ship collisions, sinking, stranding, and fires. Achieving shorter evacuation time is an important factor in increasing the survival rate during these circumstances, but the narrow and complicated structure of ships is an obstacle when it comes to executing a quick evacuation. Also, unpredictable restrictions may be imposed by bad sea or weather. In this study, various experiments were conducted with sailors currently on board ships in order to examine factors that increase evacuation time. The data was then and analyzed. Evacuation time was measured by dividing crews into groups: sailors that were given an explanation of the ship's structure and those that were not. Furthermore, the visibility range was divided into 0 m, 3 m, and 5 m. The results indicated that, having an explanation of the ship structure did not have much of an effect on evacuation time but visibility conditions led to an increase in evacuation time with a maximum of 2.5 to 2.6 times longer when the visible distance was 5 m, 0 m and 3 m. Therefore, ensuring a visible distance of over 5 m was determined to be the most important factor for reducing evacuation time. In the future, effort should be made to ensure a greater visible distance to improve the survival rate of seafarers and passengers on board ships that encounter incidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.547-553
• /
• 2016

Black carbon (BC) contained in particulate matter (PM) originating from the exhaust gases of ships' diesel engines has been receiving great attention as a cause of glacial melting and warming in the polar regions. In this study, we took samples from various locations of PM emitted from the training ship (T/S) HANBADA's main engine, in cooperation with the Korea Maritime and Ocean University. We analyzed the structure and characteristics of these samples using high-resolution transmission electron microscopy (HR-TEM) and applied our findings as fundamental research for developing PM reduction technology. We also employed our results to determine appropriate preemptive action to meet upcoming PM/BC regulations. In addition, we confirmed the emission trend of pollutants from exhaust gases under various engine operating conditions using an exhaust gas analyzer. Results obtained from the analysis of HR-TEM images showed that the structure of the PM is chain-like wispy agglomerates consisting of a number of individual spherical particles. As the sampling location was moved away from the turbo charger (T/C) towards the funnel, more condensates were observed at a low temperature and the molecular structure of the PM lost its characteristic BC structure as an amorphous structure gradually appeared. Furthermore, through the analysis of exhaust gases, we predicted a decrease in PM concentration in the exhaust stream as engine rpm increase.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.23 no.1
• /
• pp.18-33
• /
• 1995

Under the synoptic scale strong westerly winds flowing over the large steep mountains in the eastern coastal region, the strong downslope wind storms such as internal gravity waves should be generated in the lee-side of mountain. Int he daytime as sea breeze circulation induced by meso-scale thermal forcing from sea toward inland confines to the offshore side of coastal sites due to the eastward internal gravity waves. Thus, surface winds near the coastal seas were relatively weaker than those in the open sea or the inland sites. Evidently, two different kinds of atmospheric circulations such as an internal gravity wave circulation with westerly wind and a sea breeze circulation with both easterly wind near the sea surface and westerly in the upper level were apparently produced. Under this situation the atmospheric pollutants at Kangnung city should be trapped by two different circulations in the opposite directions and resulted in the high concentrations of Total Suspended Particles (TSP) and ozone (O3). At night a meso-scale land breeze from land toward the more intensification of westerly winds in the coastal regions. The concentrations of TSP controled by the strong surface winds blowing from the mountain side toward the coastal sea were relatively higher at night than those in the daytime case and the concentrations of O3 due to the downward transport of ozone from the upper atmosphere toward the surface were also much higher at night than during the day. Consequently, the atmospheric pollutant concentrations in the mountainous coastal region under the downslope wind storms were higher than those after and before the occurrences of wind storms.

• Korean Journal of Ichthyology
• /
• v.13 no.1
• /
• pp.6-18
• /
• 2001

Larvae of the gunnel Pholis fangi were collected in coastal waters off Daecheon with a bag net from March to June, 1988, and with a ring larva net in February 1989. Maturity and spawning period were analyzed by examination of the gonads of adult fish collected with a bag net from May 1998 through November 1999. In February, the larvae were widely distributed in the outer and inner Cheonsu Bay. From March to April the larvae were present mainly the inner bay; they were absent there in May and found mainly in the outer bay. After June, few gunnel larvae were collected in the study area. This suggests a seaward movement of gunnel from the nursery grounds of the bay to offshore feeding grounds. The otolith of larvae smaller than 10 mm in total length did not show a distinct growth stop. The growth stop is believed to be formed in the early larval stage when the total length is about 10 mm. This period coincides with the time of shoreward migration, suggesting a metabolic change during this period. At a total length of 30 to 40 mm, the shape of the otolith changes from spherical to elongate. Daily growth rate in length was estimated by the Gompertz equation, which is represented as follows: TL = 6.702exp{2.925"1-exp (-0.008 t)"} ($r^2=0.94$, N = 92) Assuming daily deposition of growth increments in the otolith, the time of first growth increment formation was shown to be from December to January. Gonad observations show that Pholis fangi spawns from November to December. So, the hatching time is thought to be about one month.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.658-665
• /
• 2014

Natural gas for marine diesel engine is considered as an important and clean source of energy because of simultaneously reducing the emission of NOx, SOx and GHG. Especially with a appearance of shale gas, the using of natural gas has been investigated aggressively and expected to expand rapidly. By the reports, gas engine and diesel engine were both in a similar performance in the power aspect, and the SFOC of gas engine was shown a little better than that of diesel engine. But the characteristics of exhaust gas emission were different according to various combustion technologies. And with lean burn technology, the emission of NOx could be reduced to 85% lower than that of diesel engine. In this paper, it was described that a simulation program has been developed to predict NOx emission. The developed program is adopted two-zone model and Wiebe function for combustion in cylinder. The effects of premixed and diffusive combustion could be simulated by using the excess air ratio as input data. And it was confirmed that the results of simulation were agreed with the general trends of exhaust gas emission according to various combustion conditions such as lean burn, premixed and diffusive combustion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.858-868
• /
• 2017

Korea's shipbuilding industry has led the world in the technical area over the last century. Despite this commendable performance, around 2,000 workers experience accidents almost every year with 40 being killed. This raises a question of whether the safety level of our shipbuilding industry, in particular the safety of workers, is actually at the world-class level. Accordingly, this research has analyzed several types of safety training currently provided in the field through investigating statistical data of serious accidents occurring from 2006 to 2015 in the domestic shipbuilding industry, analyzing its occurrence and causes, and conducting a survey targeting employees in the shipbuilding industry. Based on this, it has investigated problems of safety training in the shipbuilding industry and suggested improvements. First, it is essential to create a standard system for safety training in the shipbuilding industry to address problems of different kinds and levels of safety training provided by each shipyard and low quality of training, and operate more organized and systemized training. Second, safety training curriculum specializing in the shipbuilding industry should continue to be developed and standardized based on a standard system for safe training to prevent serious accidents and improve safety awareness of workers. Lastly, both employers and employees should actively provide and participate in safety training to secure safety of workers through preventing serious accidents and ultimately create safety-first culture in workplace.