• 제목/요약/키워드: Offshore Wind Power

검색결과 315건 처리시간 0.043초

국내 신재생에너지 원별 발전단가 전망 (The forecast of renewable generation cost in Korea)

  • 김길신;한유리
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.140-140
    • /
    • 2011
  • Korea's RPS, which requires that power generation companies obtain a minimum percentage of their generation by using renewable energy, will take effect in 2012. Based on the first-year law enforcement, generation companies have to satisfy 2% of RPS compliance ratio in 2012. Then, the required RPS compliance ratio will increase up to 10% in 2022. Thus generation companies need to construct power plants that utilize various types of renewable energy sources such as PV and wind power. This work is aimed to analyze the cost of such a renewable power source in terms of capital cost, capacity factor, and fuel cost. We provide the analytical expectation on the renewable power generation cost of 2012 focusing on PV, onshore/offshore wind, fuel cell, and IGCC, which are focused by government policy.

  • PDF

풍력타워용 부스닥트 포설시스템 개발 (On Installation of Bus Trunk System for Wind Tower)

  • 이준근;김봉석;박성희;안형준;이희남
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.330-335
    • /
    • 2012
  • A Bus Trunk System for Wind Tower is introduced. A marine cable has been widely used in wind tower or other offshore structure. However, as the electric load capacity is getting increased, the large number of cable lines should be used to cover such a huge amount of electric capacities, which makes the installation make quite difficult due to the heavy weight and volume of the present cables. On the other hand, by using a single bus trunk system line, the power capacity amount of 16 number of cable can be delivered with significant compactness. However, unlike flexible cable, the bus trunk is relatively stiff which could arise resonance phenomenon in the operating condition of wind tower, therefore, the vibration characteristics of bus trunk should be investigated and verify its long-term reliability during the life time of the wind tower.

  • PDF

해저 전력 케이블 탐지 기술 소개 (Introduction to Submarine Power Cable Detection Technology)

  • 김대철;채혜지;정우근;윤창범;김종현;김정훈;신성렬
    • 지구물리와물리탐사
    • /
    • 제27권1호
    • /
    • pp.57-68
    • /
    • 2024
  • 온실가스 저감을 위하여 대규모의 단지를 건설할 수 있고 발전 효율성이 우수한 해상 풍력이 각광 받고 있다. 해상 풍력 단지에서 생산한 전력을 송전하기 위해서는 해저 전력 케이블이 필수적이며, 케이블의 모니터링 및 고장 지점 파악을 위하여 해저 케이블의 위치 또는 매설 심도 분석이 필요하다. 본 논문에서는 해저 전력 케이블을 탐지하기 위한 기술 및 연구에 대하여 소개하였으며, 탄성파/음향, 전자 탐사, 자력 탐사로 분류하여 조사하였다. 탄성파/음향은 주로 선박에 장비를 설치하여 해저 전력 케이블을 탐지하였으며, 전자 및 자력 탐사는 AUV, ROV와 같은 무인 잠수정에 장비를 설치하여 케이블을 탐지하였다. 본 논문을 활용한다면 해저 케이블 탐지 기술에 대한 기초자료로 사용될 수 있을 것으로 생각된다.

부유식 파력 장치의 해상운송에 대한 구조 안전성 검토 (Structural Safety Analysis of FPWEC During Sea Transportation)

  • 조규남;김용대;배재형;신승호
    • 한국해안·해양공학회논문집
    • /
    • 제28권4호
    • /
    • pp.250-255
    • /
    • 2016
  • 부유식 진자형 파력발전 장치의 실해역 설치를 위한 예인 시 예상항로의 조류 및 풍속, 유의 파고 등의 모든 환경자료를 수집 및 분류 분석하여 위험구간에 대해 검토하였다. 이를 위하여 기상청 및 국립 해양조사원의 자료들을 수집하였으며 이들 분류 검토된 자료들을 토대로 구조물에 작용하는 외력에 대해 계산하였다. 또한 ANSYS를 이용하여 복합 환경하중이 작용할 때의 FEM 해석에 기초한 상기 부유식 진자형 파력발전 장치의 안전 여부를 확인하였다.

An Optimization Model for O&M Planning of Floating Offshore Wind Farm using Mixed Integer Linear Programming

  • Sang, Min-Gyu;Lee, Nam-Kyoung;Shin, Yong-Hyuk;Lee, Chulung;Oh, Young-Jin
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권12호
    • /
    • pp.255-264
    • /
    • 2021
  • 본 연구에서는 부유식 해상풍력발전의 운영 및 유지보수에 필요한 체계적인 정비계획 수립을 위해 최적화기법을 활용한 수리 모형을 제안하고자 한다. 주간 단위로 선박과 기술자를 운용하는 계획정비와 고장정비 작업의 배정에 혼합정수계획법(Mixed Integer Linear Programming, MILP)을 도입하였다. 본 연구의 최적화 모델을 활용한 사례연구에서는 선박과 기술자의 투입 규모가 유지정비 비용에 미치는 영향을 확인하였으며 1년간 정비계획 수립에서 더 나아가 정비작업별 상세 스케줄링까지 연계되는 단계적 최적화 방법론을 함께 제시하였다. 세부적으로는 기상 데이터와 정비 데이터를 활용한 발전량 손실을 비가동 비용으로 반영하여 정비 우선순위를 선정하였으며, 이를 통해 국내 실정에 맞는 해상풍력단지의 유지보수 전략을 제시할 수 있을 것으로 기대한다.

Assessment of the potential for the design of marine renewable energy systems

  • Duthoit, Maxime;Falzarano, Jeffrey
    • Ocean Systems Engineering
    • /
    • 제8권2호
    • /
    • pp.119-166
    • /
    • 2018
  • The assessment of the potential for the design of marine renewable energy systems is reviewed and the current situation for marine renewable energy is promising. The most studied forms of marine renewable energy are ocean wind energy, ocean wave energy and tidal energy. Wind turbine generators include mostly horizontal axis type and vertical axis type. But also more exotic ideas such as a kite design. Wave energy devices consist of designs converting wave oscillations in electric power via a power take off equipment. Such equipment can take multiple forms to be more efficient. Nevertheless, the technology alone cannot be the only step towards marine renewable energy. Many other steps must be overcome: policy, environment, manpower as well as consumption habits. After reviewing the current conditions of marine renewable energy development, the authors analyzed the key factors for developing a strong marine renewable energy industry and pointed out the huge potential of marine renewable energy.

3D electromagnetic design and electrical characteristics analysis of a 10-MW-class high-temperature superconducting synchronous generator for wind power

  • Kim, J.H.;Park, S.I.;Le, T.D.;Kim, H.M.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제16권2호
    • /
    • pp.47-53
    • /
    • 2014
  • In this paper, the general electromagnetic design process of a 10-MW-class high-temperature superconducting (HTS) synchronous generator that is intended to be utilized for large scale offshore wind generator is discussed. This paper presents three-dimensional (3D) electromagnetic design proposal and electrical characteristic analysis results of a 10-MW-class HTS synchronous generator for wind power. For more detailed design by reducing the errors of a two-dimensional (2D) design owing to leakage flux in air-gap, we redesign and analyze the 2D conceptual electromagnetic design model of the HTS synchronous generator using 3D finite element analysis (FEA) software. Then electrical characteristics which include the no-load and full-load voltage of generator, harmonic contents of these two load conditions, voltage regulation and losses of generator are analyzed by commercial 3D FEA software.