• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.274-277
• /
• 2008

Pohang Wind Energy Research Center (PoWER-C) is developing a 3 MW Radial Flux Permanent Magnet (RFPM) Synchronous Generator for offshore Wind Energy Converter (WEC). The blade rotor rpm is 15.7 and the gear ratio is set to be 92.93. The nominal generator rpm at the rated load is about 1459. Baseline design with surface mounted PM magnets are completed. However, there is some concern about the excessive eddy current heating in the magnets. To alleviate this problem, another design with embedded magnet is going on. With embedded magnets, the generator length should be increased to compensate the increased flux leakage. But the field fluctuation in the magnets due to the slots are greatly reduced. This means less eddy currents and lower magnet operating temperature. In this report, engineering efforts for embedded rotor is presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.434-438
• /
• 2006

The purpose of this paper is that investigates the Natural Frequency behavior characteristic of Wind Turbine Jacket Type Tower model, and calculated that the stress values of Thrust Load, Wave Load, Wind Load, Current Loda, Gravity Load, etc., environment evaluation analysis during static Operating Wind Turbine Jacket Type Tower model, carried out of Natural Frequency analysis of total load case to stress matrix, Frequency calculated that calculated Add Natural Frequency to stiffness matrix for determinant to stress results. The finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape.

• Journal of the korean society of oceanography
• /
• 제34권4호
• /
• pp.185-199
• /
• 1999

With a realistic geography and topography the Princeton Ocean Model is used to study the effects of topography, wind and time-varying Chanajiang (Yangtze) River discharge on the dispersion of the Chanaiiang River plume in the Yellow and East China Seas. The topographic feature of deepening offshore suppresses the offshore expansion of the discharged low salinity water while spreading along the coast is not hindered. Also the spreading of the Chanajiang River plume is very sensitive to wind conditions and the southerly wind is most responsible for the eastward expansion toward the Cheju Island. It is also shown that the influence of the Chanajiang River Diluted Water on the hydrography and circulation of the Yellow Sea including the South Sea of Korea is substantial even in the absence of tide, wind and current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.237-238
• /
• 2015

This paper analyzed the impact of Voltage Sourced Converter High Voltage Direct Current(VSC HVDC) connected an offshore wind power on the Jeju Island electrical power system. Wind power output fluctuates with the changing of wind speed. By changing wind power output occupancy into 100%, 60%, 10% respectively, we can understand the bus voltage distribution controlled by VSC HVDC. PSS/E is used to analyze steady-state simulation results which show effectiveness of the VSC HVDC for Jeju Island power system.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.130-135
• /
• 2007

The purpose of this paper is that investigates the Natural Frequency behavior characteristic of wind turbine jacket type tower model, and calculated that the stress values of thrust load, wave load, wind load, current loda, gravity load, etc., environment evaluation analysis during static operating wind turbine jacket type tower model, carried out of natural frequency analysis of total load case to stress matrix, frequency calculated that calculated add natural frequency to stiffness matrix for determinant to stress results. The finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape.

• Computational Structural Engineering : An International Journal
• /
• 제3권1호
• /
• pp.31-37
• /
• 2003

A typical marine platform in the Bay of Campeche is studied from the standpoint of structural reliability, and several characteristics of its deck such as slenderness and diameter/thickness ratios of the legs and actual degree of correlation between some variables are taken into account. The global and local buckling capacities of the deck legs are compared and the correlation coefficient between the critical axial load and the critical moment is assessed in order to validate its influence on the structural reliability. In addition, the influence of the vertical load, and its uncertainty, on the variance of the decks capacity, and latter on, on the platform's failure probability is assessed. The results presented may be used in future studies to further extend and upgrade the first version of the Reference Norm (PEMEX, 2000) and, in the longer term, to improve the current practice in the Design and Requalification of Offshore Marine Platforms in the Bay of Campeche.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.392-401
• /
• 2019

This study describes how the illustration book of Korean coastal and offshore fishing boats was published. The illustration book provides information on fisheries which need boats for their fishing operation. The book contains 25 fishing boats belonging to 15 offshore fisheries and six boats belonging to five coastal fisheries totalling 31 boats belonging to 20 kinds of fisheries. Until now, no books were available in Korea on fishing boats which provided illustrated descriptions of their use in fishing. We carried out field and literature surveys of fishing boats for three years (2016-2018) and the results were compiled into three-dimensional modeling images with schematic drawings of fishing boats, along with text explanations. The particulars and technical drawings of lines, general arrangement (GA), fishing gears and methods are collected and summarized. All fishing boats are modeled with 3D color graphics. The particulars and names of the main items of the fishing equipment are presented besides structural parts. In addition the fishing gear, fishing season and grounds, number of crews and target species for each boat are correctly described. The illustration book of Korean coastal and offshore fishing boats will contribute to understanding the current status of fishing techniques in Korea and will assist in developing new types of fishing boats.

• 대한토목학회논문집
• /
• 제31권6A호
• /
• pp.399-408
• /
• 2011

최근 스마트 센서를 활용한 구조물의 건전성 모니터링 및 손상 탐색 기법에 대한 연구가 활발히 진행되고 있다. 그 중에서도 광섬유 센서 중 하나인 FBG(fiber Bragg grating) 센서는 경량이고, 내구성이 좋으며, 전자기적 영향이 없을 뿐 아니라 한 가닥으로 여러 지점에서의 계측이 가능한 장점을 가지고 있어 많은 연구와 적용이 시도되고 있다. 이 논문에서는 이러한 FBG 센서를 활용하여 재킷식 해양구조물에 발생하는 손상을 탐색하는 연구를 수행하였으며, 특히 구조물에서 계측된 자료로부터 여러 환경요인을 제거하고 보다 손상에 민감한 특성을 보기 위하여 주성분 분석 기법 적용에 관한 연구를 중점적으로 수행하였다. 제안한 방법의 검증을 위하여 시험조류발전소 구조물의 축소 모델을 활용하여 하중 및 온도 등의 외부 환경이 다른 조건에서 실내 실험을 수행하였고, 이로부터 본 논문에서 제안한 방법이 외부 환경의 영향을 최소화하여 보다 손상을 민감하게 탐색함을 확인하였다.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.186-192
• /
• 2014

본 연구에서는 대정해상풍력단지 설치 해역과 인근수역을 이용하는 선박교통량과 해상교통흐름의 패턴을 분석하고 단지 조성 후 합리적인 대체통항로 지정에 따른 교통량을 예측하였다. 또한 예측된 교통량을 근거하여 통항로별 통항안전성을 평가하고 검토함으로써 선박의 안전운항에 필요한 제반조건 및 대책을 제시하였다. 풍력단지 설치 해역과 인근수역의 해상교통흐름 패턴을 분석한 결과 총 8가지의 교통흐름으로 분류되었고, 연간 교통량은 8,975 척으로 예측되었다. 이를 근거로 단지 조성 후 4가지의 대체 통항로 지정에 따른 교통량을 예측하였다. 예측된 교통량과 SSPA의 동력선충돌모델을 이용하여 통항안전성을 평가한 결과 충돌 및 침로이탈확률에 관한 국내 안전기준 $10^{-4}$ 이하를 만족하므로 계획된 대체통항로가 유용함을 확인하였다.

• 수산경영론집
• /
• 제46권2호
• /
• pp.59-74
• /
• 2015

This study aims to estimate optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the offshore Stow Net and the offshore Gill Net fisheries using the current value Hamiltonian method and the surplus production model. As analyzing processes, firstly, this study uses the Gavaris general linear model to estimate standardized fishing efforts of yellow croaker caught by the above multiple fisheries. Secondly, this study applies the Clarke Yoshimoto Pooley(CY&P) model among the various exponential growth models to estimate intrinsic growth rate(r), environmental carrying capacity(K), and catchability coefficient(q) of yellow croaker which inhabits in offshore area of Korea. Thirdly, the study determines optimal harvesting production, fishing efforts, and stock levels of yellow croaker using the current value Hamiltonian method which is including average landing price of yellow croaker, average unit cost of fishing efforts, and social discount rate based on standard of the Korean Development Institute. Finally, this study tries sensitivity analysis to understand changes in optimal harvesting production, fishing efforts, and stock levels of yellow croaker caused by changes in economic and biological parameters. As results drawn by the current value Hamiltonian model, the optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the multiple fisheries were estimated as 19,173 ton, 101,644 horse power, and 146,144 ton respectively. In addition, as results of sensitivity analysis, firstly, if the social discount rate and the average landing price of yellow croaker continuously increase, the optimal harvesting production of yellow croaker increases at decreasing rate and then finally slightly decreases due to decreases in stock levels of yellow croaker. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts of the multiple fisheries decreases, but the optimal stock level of yellow croaker increases. The optimal harvest starts climbing and then continuously decreases due to increases in the average unit cost. Thirdly, when the intrinsic growth rate of yellow croaker increases, the optimal harvest, fishing efforts, and stock level all continuously increase. In conclusion, this study suggests that the optimal harvesting production and fishing efforts were much less than actual harvesting production(35,279 ton) and estimated standardized fishing efforts(175,512 horse power) in 2013. This result implies that yellow croaker has been overfished due to excessive fishing efforts. Efficient management and conservative policy on stock of yellow croaker need to be urgently implemented.