• 대한토목학회논문집
• /
• 제32권2A호
• /
• pp.97-108
• /
• 2012

재킷식 해양구조물인 울돌목 시험조류발전소에 대하여 장기 모니터링을 통하여 구조물 동적 응답을 계측하였으며, 계측된 동적 응답 중 저주파수 거동을 정밀하게 계측할 수 있는 동적 경사 응답을 이용하여 구조물의 고유주파수 및 모드감쇠비를 추정하고, 이와 같은 동특성이 조위와 조류 유속 등 외부 환경에 의하여 어떤 영향을 받는지를 분석하였다. 제한된 수의 응답 계측 자료로부터 구조물의 고유주파수 및 모드감쇠비를 정밀하게 추정하기 위하여 개선된 실험모드해석 방법인 LS-FDD 방법을 제안하였으며, 제안된 실험모드해석 기법을 이용하여 울돌목 시험조류발전소의 동적 경사 응답을 분석하여, 주요 3차모드의 고유주파수와 모드감쇠비를 정밀하게 추정하였다. 추정된 동특성은 시간에 따라 크게 변동하며, 이러한 변동은 조석의 영향을 지배적으로 받고 있음을 시계열 분석 및 주파수 분석을 통하여 알 수 있었다. 또한 울돌목 시험조류발전소에서 관측한 일정 기간의 조위 및 조류 유속 자료를 이용하여, 구조물의 동특성과 조류 자료 사이의 상관관계를 분석하였고, 조위 및 유속 자료만으로 구조물의 동특성을 예측할 수 있는 모델식을 결정하였다.

• 한국해안해양공학회지
• /
• 제4권4호
• /
• pp.231-242
• /
• 1992

분 연구에서는 수치모형을 이용하여 조류 및 취송류의 순환형태를 고찰하였다. 사용된 모형은 유체의 운동 및 연속방정식에 기초한 연직평균 2차편 모형으로서 양해법을 사용하며, 개방경계에서의 해수면 변화와 바람의 전단력에 의한 forcing을 포함한다. 모형의 영역은 북위 35$^{\circ}$~36$^{\circ}$40', 동경 125$^{\circ}$~126$^{\circ}$40'이며 경사간격은 x, y 방향 공히 5km이다. 피해측에서 22일간 관측된 조석(2개 지점) 및 조류(1개 지점) 자료와 비교한 결과 본 모형은 4개 주요 분조에 의한 조석 및 조류를 정확도 90% 이내로 재현하였다. 여섯 가지 경우의 가상적인 바람에 대한 해석을 통하여 흐름의 분포양상과 지역적인 특성을 고찰하였다. 그 결과, 풍향에 관계 없이 강한 연안류가 발생하며, 또한 해저지형의 영향으로 부안 외해측에 주반경 40km의 지역적인 과류가 발생함을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.215-216
• /
• 2014

This paper proposes a control algorithm for permanent magnet synchronous generator with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage offshore wind power system under unbalanced grid conditions. The proposed control algorithm particularly compensates for the unbalanced grid voltage at the point of common coupling in a collector bus of offshore wind power system. This control algorithm has been formulated based on the symmetrical components in positive and negative rotating synchronous reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power are described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of ac input current is injected to the point of common coupling in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm makes it possible to provide a balanced voltage at the point of common coupling resulting in the generated power of high quality from offshore wind power system under unbalanced network conditions.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.607-614
• /
• 2019

It has been an issue among researchers that the tsunamis that occurred on the west coast of Japan in 1983 and 1993 damaged the coastal cities on the east coast of Korea. In order to predict and reduce the damage to the Korean Peninsula effectively, it is necessary to install offshore tsunami observation instruments as part of the system for the early detection of tsunamis. The purpose of this study is to recommend the optimal deployment of tsunami observation instruments in terms of the higher probability of tsunami detection with the minimum equipment and the maximum evacuation and warning time according to the current situation in Korea. In order to propose the optimal location of the tsunami observation equipment, this study will analyze the tsunami propagation phenomena on the east sea by considering the potential tsunami scenario on the west coast of Japan through numerical modeling using the COrnell Multi-grid COupled Tsunami (COMCOT) model. Based on the results of the numerical model, this study suggested the optimal deployment of Korea's offshore tsunami observation instruments on the northeast side of Ulleung Island.

• 복식문화연구
• /
• 제15권3호
• /
• pp.461-471
• /
• 2007

Many Korean apparel firms have been adopting the global sourcing to enhance their competitive advantages. The purposes of this study were to identify the current status of global sourcing adopted by Korean apparel firms and to provide useful information for the other apparel firms planning the global sourcing. The questionnaire survey was conducted to 65 Korean apparel firms. The firms selected for this study were women's, men's, unisex casual wear manufacturers which made their products at offshore factories. The results show that about half of them started global sourcing before 2000. Unisex casual wear firms were already doing the global sourcing very actively and women's wear firms were followers. The major benefit of the global sourcing was the cost reduction. The firms that had made inroads into the global market find much satisfaction in global sourcing. These early adopters expected their sourcing countries as a future consumer market. The threatening elements of the global sourcing were the difficulties of quality control and labor cost rising. Cost and technical ability were considered importantly in selecting the global sourcing partners. The firms started the global sorucing before 2000 were greatly depended on offshore production. They concerned for the problems related to the global sourcing.

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.408-415
• /
• 2016

The offshore structures exposed to harsh corrosive such as the marine environment is essential for the quality management technique throughout the life cycle of initial design, construction and operation. Also, it should satisfy the design life and ensure the safety of the substructure with optimization of design process. This study focused on optimization of design condition for corrosion protection of wind turbine structure and computational analyzing was performed to evaluate the performance of corrosion protection with utilizing practical experimental data. We expect this analytical study contribute to improve the corrosion maintenance stability and economical efficiency of designing wind turbine structures. As a result, the design of cathodic protection system using sacrificial anodes required accurate identification of current density in order to meet the long term design life, which can be seen that a change of structure surface's coating breakdown factor is one of the key influencing factors.

• 수산해양교육연구
• /
• 제25권1호
• /
• pp.167-180
• /
• 2013

A capstone design is regarded as one of cap courses in undergraduate engineering education because it requires most prerequisites and makes students experience real engineering design processes. There have been case studies to show how this subject should be organized, practiced, and optimized. This study shows one of the case studies by focusing offshore wind power, one of newly recognized renewable energy resources, especially targeting for the design of wind turbine foundation and submarine power cable protectors mainly because of current energy and global warming crisis. To pinpoint engineering design, the students'activities during the project and design procedures are monitored, evaluated, and recommended; hence, core factors are addressed to develop successful aim, theory, practice, and other necessities. These factors include creative problem solving abilities; recognition of engineering curriculum; selection of project theme based on significance, ripple effect, and education purpose; team organization by the full brain model; systematization of project process; realization of engineering design; and synthesis of evaluation. In the end, the aftermath and future works are discussed.

• Ocean Systems Engineering
• /
• 제8권1호
• /
• pp.21-32
• /
• 2018

Due to the escalation in hydrocarbon consumption, the offshore industry is now looking for advanced technology to be employed for deep sea exploration. Riser system is an integral part of floating structure used for such oil and gas extraction from deep water offering a system of drill twines and production tubing to spread the exploration well towards the ocean bed. Thus, the marine risers need to be precisely employed. The incorporation of the strengthening material, fiber reinforced polymer (FRP) for deep and ultra-deep water riser has drawn extensive curiosity in offshore engineering as it might offer potential weight savings and improved durability. The design for FRP strengthening involves the local design for critical loads along with the global analysis under all possible nonlinearities and imposed loadings such as platform motion, gravity, buoyancy, wave force, hydrostatic pressure, current etc. for computing and evaluating critical situations. Finite element package, ABAQUS/AQUA is the competent tool to analyze the static and dynamic responses under the offshore hydrodynamic loads. The necessities in design and operating conditions are studied. The study includes describing the methodology, procedure of analysis and the local design of composite riser. The responses and fatigue damage characteristics of the risers are explored for the effects of FRP strengthening. A detail assessment on the technical expansion of strengthening riser has been outlined comprising the inquiry on its behavior. The enquiry exemplifies the strengthening of riser as very potential idea and suitable in marine structures to explore oil and gas in deep sea.

• 한국해안·해양공학회논문집
• /
• 제28권4호
• /
• pp.250-255
• /
• 2016

부유식 진자형 파력발전 장치의 실해역 설치를 위한 예인 시 예상항로의 조류 및 풍속, 유의 파고 등의 모든 환경자료를 수집 및 분류 분석하여 위험구간에 대해 검토하였다. 이를 위하여 기상청 및 국립 해양조사원의 자료들을 수집하였으며 이들 분류 검토된 자료들을 토대로 구조물에 작용하는 외력에 대해 계산하였다. 또한 ANSYS를 이용하여 복합 환경하중이 작용할 때의 FEM 해석에 기초한 상기 부유식 진자형 파력발전 장치의 안전 여부를 확인하였다.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.7-15
• /
• 2013

Eco-friendly and sustainable seaweed biomass energy have been under the spotlight as the future of renewable energy. However, seaweed culture is primarily conducted inshore, with the research on offshore culture still in an early stage. For massive biomass production, a systematic engineering approach is required to devise offshore seaweed culture facilities rather than the conventional empirical ones. To establish the fundamental behavior of seaweed culture facilities, the dynamic characteristics of a seaweed culture facility were analyzed in the study. For this purpose, numerical analyses of the seaweed culture facility (a frame type) were carried out by using the hydrodynamic simulation program ANSYS-AQWA. For the analysis, environmental loads were considered using the wave spectra and co-linear current; mooring variables were selected as parameters; and time domain analyses were carried out to acquire the time series responses and eventually the dynamic characteristics. Finally, the mooring performance was evaluated. It was found that the motion could be controlled by adjusting the buoyancy and mooring slope.