• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.31-44
• /
• 2010

Ever since the introduction of offset lithography, an operator have looked for ways to improve the process by reducing need for dampening solution. Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for lithography printing must work with dampening solution. The dampening solution may cause the emulsification of ink by the printing pressure in the printing nip. Emulsified ink changed viscosity, tack and causes problems such as bad transfer, uniform density and printed mottle. For a high quality web printing, we studied the effect of emulsified heat-set web inks on the printability, such as amount of ink transfer, printed density and uniformity. For this study, we were carried out by using IGT printability tester C1. For determination of ink properties using the spread meter and Thwing Albert Ink-o-meter, and using the densitometer and image analysis for printed quality determination. The experimental results of this study, we look forward to can be used as the basis for improve of the web print quality.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.1-13
• /
• 2008

Printed mottle of coated paper is one of the most common phenomenon and the most difficult problem in offset printing. Offset printing is processed mainly processed by the attractive properties between water and oil, so all inks for off-printing must work with dampening solution(water). It may cause the emulsion on the printing nip from the printing pressure. This study aimed to investigate the effect of emulsified inks on print mottle from emulsified cyan ink by force with each different IP A contents. We measured the print mottle by densitometer and image analysis method. The emulsified inks also give effect to now properties of inks and it caused more ink transfer rate, however, it caused low density of inks. Moreover the emulsified inks were spreaded to around of dots and cause the thinning density on the non-printing area like print mottle. The results showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. So we could find out the obvious effect of emulsified inks to print mottle.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.31-45
• /
• 1996

For the purpose of study on the printability of domestic art papers, the physical properties of domestic coated paper for offset printing were investigated. 25 kinds of sample papers were prepared and were examined in accordance with KS and TAPPI standard testing method i.e., basis weight, density, opacity, gloss, roughness, smoothness, brightness, and K&N absorption. IGT printability tester was used to obtain the printability parameters, such as maximum ink requirement of paper Y, limiting printing density D print through, and density smoothness constant m value.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.85-93
• /
• 2007

The printed mottle is recognized as the most common printing problems in using coated paper and one of the most difficult problems to solve in offset printing. Printed mottle is caused by an uneven penetration of ink into the paper and binder migration. The prevention of printed mottle requires of coating color formation, especially the minimum of binder migration. Printing worked by interaction of printing ink, coated paper and printing pressure. In this study, we investigated the effect of the properties changing of coated paper and printing conditions such as ink dispersion, nip condition and amount of ink transfer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.45-57
• /
• 2006

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 2 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow) and K(black) and of 3 kinds of domestic coated paper, using colorimetric color measurement method.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.77-92
• /
• 2005

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 3 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow), and K(black), and of 3 kinds of domestic coated paper, using densitometric color measurement method.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.15-32
• /
• 2011

In printing, managing color means that how closely its color reproducts and printing supplier meets customers' requirements. When applying device profiles, it depends on properties of the devices. But color management of domestic digital prints is accomplished more scientifically and objectively than any other printing. According to this paper addresses a method of evaluating between proof prints and offset prints which are produced by identical date on the field. We evaluate two cases normal proof prints and domestic offset prints based on standardized color data analysis and subjective data analysis. We gathered objective data by measuring solid density, $CIEL^*a^*b^*$ and ${\Delta}E^{*_}{ab}$. Furthermore, we evaluated the offset prints and proof prints through human eyes to decide the ranking.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.299-303
• /
• 1999

In this paper, to investigate the deinkability of domestic and Australian old newsprint according to aging time, two types of newsprint printed with commercial offset ink in domestic(K; Korean newsprint, C; Canadian newsprint), Japanase(J) and Australian(A) old newsprint were aged naturally for 10, 30, 90, 180 days, and then yield, brightness, fiber length, and physical properties (tensile index, tear index, burst index) were evaluated according to aging time. As the aging time increased, the yield and brightness of respective samples decreased. The brightness and yield were decreased in the order of A, K, J and C. The brightness and strength of newsprint varied according to the ink formulation and kinds of pulp and wood. The decreasing order of strength is subsequently J, K, C and A.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.45-56
• /
• 2012

Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.04a
• /
• pp.152-157
• /
• 2006

Printing mottle of coated paper is one of the most common and the most difficult problems in offset printing. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. This research focused on improvement of printing mottle. Effects of base paper properties, coating color composition and printing conditions such as printing pressure and printing speed on printing mottle were investigated with RI tester and IGT tester.