• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.266-270
• /
• 1991

Storage in the form of brown or milled rice saves space and cut cost rather than storage of rough rice, the common way of grain storage in Korea. But, brown or milled rice may be more susceptable to grain aging and sensory change than rough rice. Rice stored in government warehouse for 20 months after harvest was hulled into brown or milled rice and packaged with kraft paper bag (paper package), polyprophylen (PP package), and polyethylene (PE package). Then, after those rice packages were stored under room condition for one year, we investigated germinability, fat acidity, and sensory change to determine milling and packaging effects. Germinability of rough and brown rice was decreased significantly after long-term storge. In germination rate, Chucheong cultivar was lower than Milyang #23, brown rice was lower than rough rice, but there was no differences within packaging materials. TTC test which had a significant correlation with germinability can be used as a handy procedure for predicting grain germination. Fat acidity was increased as the order of rough < milled < brown rice in terms of milling, and PP < paper < PE package in terms of packaging materials. Especially, storage of brown rice increased fat acidity above 30 mg KOH, indicating one of characteristics of grain aging. To prevent from high fat acidity it was necessary to store in forms of rough grain with paper or PP packaging and milled rice with paper, or PP, or PE packaging. In sensory test of stored grain, eating quality in brown rice was the worst because of acidification of fatty acid. Also, eating quality of stored grain became worse as fat acidity increased.

• Geomechanics and Engineering
• /
• v.35 no.1
• /
• pp.29-39
• /
• 2023

As the intensity of urban underground space development increases, more and more tunnels are planned and constructed, and sometimes it is inevitable to encounter situations where tunnels have to underpass the river embankments. Most previous studies involved tunnels passing river embankments perpendicularly or with large intersection angle. In this study, a project case where two EPB shield tunnels with 8.82 m diameter run parallelly underneath a river embankment was reported. The parallel length is 380 m and tunnel were mainly buried in the moderate / slightly weathered clastic rock layer. The field monitoring result was presented and discussed. Three-dimensional back-analysis were then carried out to gain a better understanding the interaction mechanisms between shield tunnel and embankment and further to predict the ultimate settlement of embankment due to twin-tunnel excavation. Parametrical studies considering effect of tunnel face pressure, tail grouting pressure and volume loss were also conducted. The measured embankment settlement after the single tunnel excavation was 4.53 mm ~ 7.43 mm. Neither new crack on the pavement or cavity under the roadbed was observed. It is found that the more degree of weathering of the rock around the tunnel, the greater the embankment settlement and wider the settlement trough. Besides, the latter tunnel excavation might cause larger deformation than the former tunnel excavation if the mobilized plastic zone overlapped. With given geometry and stratigraphic condition in this study, the safety or serviceability of the river embankment would hardly be affected since the ultimate settlement of the embankment after the twin-tunnel excavation is within the allowable limit. Reasonable tunnel face pressure and tail grouting pressure can to some extent suppress the settlement of the embankment. The recommended tunnel face pressure and tail grouting pressure are 300 kPa and 550 kPa in this study, respectively. However, the volume loss plays the crucial role in the tunnel-embankment interaction. Controlling and compensating the tunneling induced volume loss is the most effective measure for river embankment protection. Additionally, reinforcing the embankment with cement mixing pile in advance is an alternative option in case the predicted settlement exceeds allowable limit.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.37-48
• /
• 2010

In this study, the seepage flow monitoring method by the hydraulic head loss rate was developed for the purpose of application to offshore construction site enclosed by cofferdams in which seepage force varies periodically. The amount of the hydraulic head loss rate newly defined in this graph was in a range between 0 and 1. The zero of the rate means the existence of flow with no seepage resistance. The 1 of the rate means no seepage flow through the ground. The closer to 1 the coefficient of determinant in the hydraulic head loss graph is, the more the ground through which seepage water flows is stable. The closer to 0 the coefficient of determinant in the hydraulic head loss graph is, the more the ground through which seepage water flows was unstable and the higher the possibilities of existence of empty space or of occurrence of piping on the seepage flow pass in the ground is. The hydraulic head loss graph makes it possible to monitor sensitively the situation of seepage flow state, and the graph helps to understand easily the seepage flow state at the specific section on the whole cofferdam.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.197-208
• /
• 2022

The existence of shallow bedrock and the desire to use underground space necessitate the use of blasting methods. The standard blasting method under water after drilling is associated with certain technical difficulties, including reduced detonation power, the use of a fixed charge per delay, and decoupling. However, there is no blasting method to replace the existing blasting method. In this paper, a dry hole charged with ANFO blasting is assessed while employing a dry hole pumping system to remove water from the drill borehole. Additional standard blasting is also utilized to compare the blasting performances of the two methods. The least-squares linear regression method is adopted to analyze the blasting vibration velocity quantitatively using the measured vibration velocity for each blasting method and the vibration velocity model as a function of the scaled distance. The results show that the dry hole charged with ANFO blasting will lead to greater damping of the blasting vibration, more energy dissipation to crush the surrounding rock, and closer distances for the allowable velocity of the blasting vibration. Also, standard blasting shows much longer influencing distances and a wider range of the blasting pattern. The pilot test confirms the blasting efficiency of dry hole charged with ANFO blasting.

• The Korean Journal of Franchise Management
• /
• v.9 no.3
• /
• pp.19-29
• /
• 2018

Purpose - Due to the increase in coffee consumption and competition, domestic coffee franchise companies are currently entering the overseas market. Therefore, coffee franchise companies are pursuing a variety of marketing strategies to meet customer needs and gain competitive advantage in overseas markets. From this perspective, overseas franchise companies need to ensure that their servicescapes meet the needs of their overseas customers. For these purposes, the study is to identify the impact servicescapes on customer satisfaction and customer loyalty focused on Global Coffee Franchise Company "C", which extended its business worldwide in Mongolia. Research design, data, and methodology - The data were collected from customers who had visited the stores of 'C' company in Ulaanbaatar, Mongolia. 435 valid questionnaires collected through online survey coded and analyzed using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 24 and SmartPLS 3.0. Result - Firstly, seating comfort, facility aesthetics, and cleanliness, ambient conditions among servicescapes influenced customer satisfaction. Secondly, servicescapes didn't affect the loyalty directly. Third, customer satisfaction had positive effect on loyalty. Fourthly, cleanliness which was ranked lower in Korea had a great effect on customer satisfaction in Mongolia. Fifthly, IPMA(Importance-performance map analysis) shows that the importance of servicescapes is higher for women than for men, and facility aesthetics for female and cleanliness is the most important for male. Conclusions - The results of this study show that there is a positive (+) effect on customer satisfaction in order of cleanliness, ambient conditions, aesthetics, and seating comfort. Therefore, franchise companies considering or advancing into Mongolia should consider importance in order of cleanliness, ambient conditions and aesthetics when entering Mongolia market. For example, franchise managers should select Monday as a "clean day," and all merchants should spend all of their open hours and keep their stores clean in accordance with the head office manual. In addition, franchise managers need to hire a VMD (visual merchandising) experts to build up a physical environment that will effectively highlight the space-specific display of the store so that Mongolian local customers can have a satisfactory climate and aesthetics. And, the IMPA analysis between servicescapes and customer satisfaction shows that women are more susceptible to servicescapes than men. Especially, in the case of women, the importance of esthetics is high, but the performance is low. Thus, if the aesthetics are actively improved, customer satisfaction can be effectively increased.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.193-203
• /
• 2019

Family films with insight of the society are now recognized as significant texts to communicate with audience from the beginning of the history of film and to reflect various viewpoints on changes of the times and socio-cultural context. In such aspect, the films of Hirokazu Kore-eda are very significant in that they suggest very sharp view on modern society through family narrative. His family narratives not only presented a profound reflection on the modern society and human relations through themes on death, loss, severance, and alienation, but also formed a public sympathy based on success in the box-office numbers despite his heavy subjects. His such achievement is closely related to the format of spatial representation to record 'time' and 'daily life' as well as the family film as a narrative form to draw the meaning of a family. Therefore, this study analyzes the family narrative and the format of spatial representation in the films of Hirokazu Kore-eda, and could find the film form where life and space closely communicate each other to reach the topic. This study, concentrating on the spatial representation and the roles and meanings of formal factors in family narrative, can find its own value in its expansion out of the previous studies which adopted macro perspectives on the trend of the times.

• Korean Journal of Remote Sensing
• /
• v.40 no.2
• /
• pp.203-217
• /
• 2024

The Land Use, Land-Use Change and Forestry (LULUCF) sector of the National Greenhouse Gas Inventory is crucial for obtaining data on carbon sinks, necessitating accurate estimations. This study analyzes cases of countries applying the LULUCF sector at the Tier 3 level to propose enhanced methodologies for carbon sink estimation. In nations like Japan and Western Europe, satellite spatial information such as SPOT, Landsat, and Light Detection and Ranging (LiDAR)is used alongside national statistical data to estimate LULUCF. However, in Korea, the lack of land use change data and the absence of integrated management by category, measurement is predominantly conducted at the Tier 1 level, except for certain forest areas. In this study, Space-borne LiDAR Global Ecosystem Dynamics Investigation (GEDI) was used to calculate forest canopy heights based on Relative Height 100 (RH100) in the cities of Icheon, Gwangju, and Yeoju in Gyeonggi Province, Korea. These canopy heights were compared with the 1:5,000 scale forest maps used for the National Inventory Report in Korea. The GEDI data showed a maximum canopy height of 29.44 meters (m) in Gwangju, contrasting with the forest type maps that reported heights up to 34 m in Gwangju and parts of Icheon, and a minimum of 2 m in Icheon. Additionally, this study utilized Ordinary Least Squares(OLS)regression analysis to compare GEDI RH100 data with forest stand heights at the eup-myeon-dong level using ArcGIS, revealing Standard Deviations (SDs)ranging from -1.4 to 2.5, indicating significant regional variability. Areas where forest stand heights were higher than GEDI measurements showed greater variability, whereas locations with lower tree heights from forest type maps demonstrated lower SDs. The discrepancies between GEDI and actual measurements suggest the potential for improving height estimations through the application of high-resolution remote sensing techniques. To enhance future assessments of forest biomass and carbon storage at the Tier 3 level, high-resolution, reliable data are essential. These findings underscore the urgent need for integrating high-resolution, spatially explicit LiDAR data to enhance the accuracy of carbon sink calculations in Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.2
• /
• pp.25-36
• /
• 2016

This paper discusses the character of communication among participating stakeholders in the Improving Alley Landscapes in Residential Neighborhoods project. The participation of diverse stakeholders in conventional urban redevelopment is considered to delay and complicate the progress of a project. However, in urban regeneration, a field-oriented operating system and collaboration between diverse stakeholders is considered critical to building a sustainable community. A stakeholder is defined as "a person or organization that can influence decision-making or be influenced by it." This paper uses a case study to examine what types of stakeholders participate and what communicative processes and ideas are shared among them. Six neighborhoods were selected out of a total of 26 of Seoul's 2014 Improving Alley Landscapes project. This research was developed through interviews and a review of the literature. The character of communication among stakeholders in the case study is as follows. Firstly, the administration initiated the project but did not show leadership. This was caused by a gap in understanding about the project between city and borough administrations, Further, the city administration lacked experience with projects that placed an emphasis on fieldwork. Tongjand and Banjang, at ancillary institutions, acted as spokespersons and helped people in the community to understand the administrative process. However, because they led communication and used personal relationships to ensure they communicated effectively, the communication process had limits from the perspective of democratic process. Diverse stakeholders expressed their opinions in the public sphere and communicated about them using diverse media. Finally, experts produced the output, facilitated communication, and mediated in conflicts. Because new experts acted as facilitators and mediators, there was a great deal of trial and error. This project has particular significance: Seoul's city government deals with urban space rather than parks and green space, which are limited by boundaries; and whether "green" can be used for urban renovation was tested by several landscape architects, who sought to identify a new role in urban renovation, namely, the role of landscape and landscape architecture. However, the project has some limitations, including an insufficiently detailed project plan, a lack of common understanding among stakeholders, and a short timeframe. A number of stakeholders overcame these limitations to a certain degree. Officials of the Borough and the Dong managed the project and resolved civil complaints. Experts provided special information, and contributed to the design and construction of improvements.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.187-199
• /
• 2013

Umbrella arch method (UAM) used for improving the stability of the tunnel ground condition has been widely applied in the tunnel construction projects due to the advantage of obtaining both reinforcement and waterproof. The purpose of this study is to develop the evaluation technique of the integrity of bore-hole in UAM by using a non-destructive test and to evaluate the possibility of being applied to the field. In order to investigate the variations of frequency depending on grouted length, the specimens with different grouted ratios are made in the two constraint conditions (free boundary condition and embedded condition). The hammer impact reflection method in which excitation and reception occur simultaneously at the head of pipe was used. The guided waves generated by hitting a pipe with a hammer were reflected at the tip and returned to the head, and the signals were received by an acoustic emission (AE) sensor installed at the head. For the laboratory experiments, the specimens were prepared with different grouted ratios (25 %, 50 %, 75 %, 100 %). In addition, field tests were performed for the application of the evaluation technique. Fast Fourier transform and wavelet transform were applied to analyze the measured waves. The experimental studies show that grouted ratio has little effects on the velocities of guided waves. Main frequencies of reflected waves tend to decrease with an increase in the grouted length in the time-frequency domain. This study suggests that the non-destructive tests using guided ultrasonic waves be effective to evaluate the bore-hole integrity of the UAM in the field.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.221-241
• /
• 2018

As we enter the knowledge society, the importance of information as a new form of capital is being emphasized. The importance of information classification is also increasing for efficient management of digital information produced exponentially. In this study, we tried to automatically classify and provide tailored information that can help companies decide to make technology commercialization. Therefore, we propose a method to classify information based on Korea Standard Industry Classification (KSIC), which indicates the business characteristics of enterprises. The classification of information or documents has been largely based on machine learning, but there is not enough training data categorized on the basis of KSIC. Therefore, this study applied the method of calculating similarity between documents. Specifically, a method and a model for presenting the most appropriate KSIC code are proposed by collecting explanatory texts of each code of KSIC and calculating the similarity with the classification object document using the vector space model. The IPC data were collected and classified by KSIC. And then verified the methodology by comparing it with the KSIC-IPC concordance table provided by the Korean Intellectual Property Office. As a result of the verification, the highest agreement was obtained when the LT method, which is a kind of TF-IDF calculation formula, was applied. At this time, the degree of match of the first rank matching KSIC was 53% and the cumulative match of the fifth ranking was 76%. Through this, it can be confirmed that KSIC classification of technology, industry, and market information that SMEs need more quantitatively and objectively is possible. In addition, it is considered that the methods and results provided in this study can be used as a basic data to help the qualitative judgment of experts in creating a linkage table between heterogeneous classification systems.