• 충청수학회지
• /
• 제19권4호
• /
• pp.403-408
• /
• 2006

A pebbling move on a connected graph G is taking two pebbles off of one vertex and placing one of them on an adjacent vertex. The domination cover pebbling number ${\psi}(G)$ is the minimum number of pebbles required so that any initial configuration of pebbles can be transformed by a sequence of pebbling moves so that the set of vertices that contain pebbles forms a domination set of G. We determine the domination cover pebbling number for fans, fuses, and pseudo-star.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.496-499
• /
• 1995

In this paper, a new detection scheme, the detectable maneuver set (DMS) scheme, is proposed by incorporating the trade-off property between target maneuver magnitude and detection time delay. With this new detection scheme, small maneuvers can be effectively detected without enlarging window size. Simulation results show that the proposed DMS scheme gives better tracking performance.

• 유공압시스템학회논문집
• /
• 제2권2호
• /
• pp.8-13
• /
• 2005

This paper investigates a fast, accurate and inexpensive hydraulic motor speed control system using high speed on-off solenoid valves. In order to retain the advantages of the two position valve and obtain better performance, the valves are operated by pulse width modulation(PWM) control. PWM signal is generated from a LabWIEW program in microcomputer in order to set up various duty ratio and frequency of carrier wave in PWM signal with varying system parameters. As the results of experiments, the speed control of a hydraulic motor was successfully implemented using on-off solenoid valves. In order to attenuate the pressure ripple and speed variation due to discontinuously controlled flow through the on-off valves, a resonator hose fabricated for automobile power steering system was connected between the valve and a hydraulic motor. From experimental results obtained in the hydraulic motor system with a resonator hose, it was ascertained that the resonator hose showed excellent performances in reducing pressure ripple and motor speed variation.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.345-360
• /
• 2019

The shear keys are set in a seismic isolation system to resist the long-term service loadings, and are cut off to isolate the earthquakes. This paper investigated the influence of shear keys on the seismic performance of a vertical spring-viscous damper-concave Coulomb friction isolation system by an incremental dynamic analysis (IDA) and a performance-based assessment. Results show that the cutting off process of shear keys should be simulated in a numerical analysis to accurately predict the seismic responses of isolation system. Ignoring the cutting off process of shear keys usually leads to untrue seismic responses in a numerical analysis, and many of them are unsafe for the design of isolated structure. And those errors will be increased by increasing the cutting off force of shear keys and decreasing the spring constant of shear keys, especially under a feeble earthquake. The viscous damping action postpones the cutting off time of shear keys during earthquakes, and reduces the seismic isolation efficiency. However, this point can be improved by increasing the spring constant of shear keys.

• 전자공학회논문지A
• /
• 제30A권2호
• /
• pp.63-75
• /
• 1993

As the CMOS technology becomes the most dominant circuit realization method, the cost problem for the test which includes both the transistor-level FET stuck-on and stuck-off faults and the gatelevel stuck-at faults becomes more and more serious. In accordance, this paper proposes a test set and its generation algorithm, which handles both the transistor-level faults and the gate-level faults, thus can unify the test steps during the IC design and fabrication procedure. This algorithm uses only the logic equation of the given logic function as the input resource without referring the transistor of gate circuit. Also, the resultant test set from this algorithm can improve in both the complexity of the generation algorithm and the time to apply the test as well as unify the test steps in comparing the existing methods.

• 전자공학회논문지A
• /
• 제30A권11호
• /
• pp.140-148
• /
• 1993

High Integration ratio of CMOS circuits incredily increases the test cost during the design and fabrication processes because of the FET fault(Stuck-on faults and Stuck-off faults) which are due to the operational characteristics of CMOS circuits. This paper proposes a test generation algorithm for an arbitrarily large CMOS circuit, which can unify the test steps during the design and fabrication procedure and be applied to both static and dynaic circuits. This algorithm uses the logic equations set for the subroutines resulted from arbitrarily dividing the full circuit hierarchically or horizontally. Also it involves a driving procedure from output stage to input stage, in which to drive a test set corresponding to a subcircuit, only the subcircuits connected to that to be driven are used as the driving resource. With this algorithm the test cost for the large circuit such as VLSI can be reduced very much.

• 한국콘텐츠학회논문지
• /
• 제9권12호
• /
• pp.77-85
• /
• 2009

멀티미디어가 일반화됨에 따라 이 콘텐츠 이용을 위한 수많은 소프트웨어가 개발되었다. 다이렉트쇼(Directshow)는 보다 쉽고, 빠르면서, 범용성 있는 멀티미디어 소프트웨어 개발을 위한 미디어 프레임워크(Framework)이다. 다이렉트쇼에서는 필터(Filter)간 연결을 통해 데이터 처리를 할 수 있다. 일반적으로 필터 간 자동연결기법을 이용하여 필터그래프(Filtergraph)를 구성하였다. 그러나 필터 간 자동연결시원하지 않는 필터들이 연결되어 예상치 못한 결과가 출력되거나 필터 핀(Pin)간 연결에 실패할 수 있다. 따라서 본 논문에서는 원하는 필터들만 연결하기 위하여 불필요한 필터들을 차단하는 방법에 대하여 제안한다. 차단방법에는 필터 내부 차단과 필터 외부 차단이 있으며, 내부 차단은 연결 호환성이 좋고 필터연결시간이 빠르고 외부차단은 필터 소스가 불필요하며 연결의 정확도가 높다. 결론적으로 이들 필터 차단방법의 장점을 조합하여 원하는 필터 간 연결을 구성하고, 오류를 최소화 할 수 있는 다이렉트쇼 기반의 필터차단기법 모델을 제안한다.

• 대한한방소아과학회지
• /
• 제37권4호
• /
• pp.1-14
• /
• 2023

Objectives This study aimed to evaluate the correlation between pediatric weakness scale scores and growth indices. Furthermore, we intended to calculate the cut-off values for diagnosing Kidney Weak Children through growth indices. Methods A total of 193 patients, aged 6 - 12 years, underwent both the pediatric weakness scale and bone age assessment, and the correlations between the pediatric weakness scale and growth indices were analyzed. Moreover, the cut-off values for diagnosing Kidney Weak Children were calculated. Differences in bone age and predicted height between the normal group and Kidney Weak Children, classified according to the calculated cut-off values, were analyzed. Results The weakness of the Shin or kidney system was significantly correlated with the height percentile, weight percentile, differences in current height percentile and mid parental height percentile, differences in predicted height and mid parental height, and differences in bone age and chronological age. When the criteria for diagnosing Kidney Weak Children is set at "height percentile of ≤25% and weight percentile of ≤25%", the sensitivity and specificity of the cut-off value were maximized. The cut-off values for weakness of the Shin or kidney system were 9 in children aged 6 - 9 years and 10 in children aged 10 - 12 years. Conclusions To diagnose Kidney Weak Children, the cut-off values of weakness of the Shin or kidney system were 9 in children aged 6 - 9 years and 10 in children aged 10 - 12 years.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.305-308
• /
• 1997

The on-line calculation method is developed to obtain the temperature trajectory that brings the reactants to the desired state in batch styrene polymerization reactor. The temperature trajectory is obtained by applying the moments of the polymer concentration to the 2-step calculation method. The computer simulation is also carried out to verify the superiority of the on-line method to the off-line one. When a temperature disturbance of constant size is introduced, the off-line results shows considerable deviation from the target degree of polymerization. The on-line strategy set up a new trajectory to reach the desired state by using the current state of the reactor. Therefore, the on-line strategy deals with the changes of the system more adequately than the off-line strategy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.349-352
• /
• 2006

Pull-off test is generally used as a method of evaluating bond strength of FRP with concrete at the job site. However, pull-off test damages FRP composites and the maximum pull-off strength is limited up to tensile strength of concrete. Accordingly, it is required to set-up a test method that can simply evaluate bond performance of structural adhesive. This study suggested compression and bending test of epoxy resin as test methods that can indirectly evaluate performance of adhesive, as well as standardized test specification for different types of specifications from various countries. In this study, the section dimension of compression and bending test specimens is unified, and standard test specimen size is achieved by test results.