• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.3
• /
• pp.343-357
• /
• 2012

The Seoul metropolitan subway system can be represented by a graph which consists of nodes and edges. In this paper, we study classification of subway stations and trip behaviour of subway passengers through partitioning the graph of the subway system into roughly equal groups. A weight of each edge of the graph is set to the number of passengers who pass the edge, where the number of passengers is extracted from the transportation card transaction database. Since the graph partitioning problem is NP-complete, we propose a heuristic algorithm to partition the subway graph. The heuristic algorithm uses one of two alternative objective functions, one of which is to minimize the sum of weights of edges connecting nodes in different groups and the other is to maximize the ratio of passengers who get on the subway train at one subway station and get off at another subway station in the same group to the total subway passengers. In the experimental results, we illustrate the subway stations and edges in each group by color on a map and analyze the trip behaviour of subway passengers by the group origin-destination matrix.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.1
• /
• pp.14-19
• /
• 2000

Purpose : This study was to present the functional brain mapping of both functional magnetic resonance imaging(MRI) and transcranial magnetic stimulation(TMS) in a case of schizencephaly. Materials and methods : A 28-year-old man, who had left hemiplegia and schizencephaly in right cerebral hemisphere, was exacted with both functional MRI and TMS. Motor function of left hand was decreased whereas right hand was within normal limit. For functional MRI, gradient-echo echo planar imaging($TR/TE/{\alpha}$=1.2 sec/90 msec/90) was employed. The paradigm of motor task consisted of repetitive self-paseo hand flexion-extension exercises with 1-2 Hz periods. An image set of 10 slices was repetitively acquired with 15 seconds alternating periods of task performance and rest and total 6 cycles (three ON periods and three OFF periods) were performed. In brain mapping, TMS was performed with the round magnetic stimulator (mean diameter; 90mm). The magnetic stimulation was done with 80% of maximal output. The latency and amplitude of motor evoked potential(MEP)s were obtained from both abductor pollicis brevis(APB) muscles. Results : Functional MRI revealed activation of the left primary motor cortex with flexion-extension exercises of healthy right hand. On the other hand, the left primary motor cortex, left supplementary motor cortex, and left promoter areas were activated with flexion-extension exercises of left hand. In TMS, magnetic evoked potentials were induced in no areas of right cerebral hemisphere, but in 5 areas of left corebral hemisphere from both abductor pollicis brevis. Latency, amplitude, and contour of response of the magnetic evoked potentials in both hands were similar. Conclusion : Functional MRI and TMS in a patient with schizencephaly were successfully used to localize cortical motor function. Ipsilateral motor pathway is thought to be secondary to reinforcement of the corticospinal tract of the ipsilateral motor cortex.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.4
• /
• pp.143-148
• /
• 2015

Objective: The aim of the current study was to determine the predictive value of anti-$M{\ddot{u}}llerian$ hormone (AMH) levels for pregnancy outcomes in patients over 40 years of age who underwent in vitro fertilization or intracytoplasmic sperm injection-embryo transfer (IVF/ICSI-ET) cycles. Methods: We retrospectively analyzed the medical records of 188 women aged 40 to 44 years who underwent IVF/ICSI-fresh ET cycles due to unexplained infertility in the fertility center of CHA Gangnam Medical Center. Patients were divided into group A, with AMH levels <1.0 ng/mL (n=97), and group B, with AMH levels ${\geq}1.0ng/mL$ (n=91). We compared the clinical pregnancy rate (CPR) in the two groups and performed logistic regression analysis to identify factors that had a significant effect on the CPR. Results: The CPR was significantly lower in group A than group B (7.2% vs. 24.2%, p<0.001). In multivariate logistic regression analysis, AMH levels were the only factor that had a significant impact on the CPR (odds ratio, 1.510; 95% confidence interval, 1.172-1.947). The area under the receiver operating characteristic curve for AMH levels as a predictor of the CPR was 0.721. When the cut-off level of AMH was set at 1.90 ng/ mL, the CPR was 6.731-fold higher in the group with AMH levels ${\geq}1.90ng/mL$ than in the group with AMH levels <1.90 ng/mL (p<0.001). Conclusion: Our study showed that AMH levels were predictive of clinical pregnancy in infertility patients over 40 years of age. Further prospective studies should be conducted to validate the predictive capability of AMH levels for the outcome of clinical pregnancy.

• Science of Emotion and Sensibility
• /
• v.10 no.1
• /
• pp.127-133
• /
• 2007

The present study investigated whether the emotional states reading ability through facial expression changes by age(3-, 5-year-old and university student groups), sex(male, female), facial expression's presenting areas(face, eyes) and the type of emotions(basic emotions, complex emotions). 32 types of emotional state's facial expressions which are linked relatively strong with the emotional vocabularies were used as stimuli. Stimuli were collected by taking photographs of professional actors facial expression performance. Each individuals were presented with stories which set off certain emotions, and then were asked to choose a facial expression that the principal character would have made for the occasion presented in stories. The result showed that the ability of facial expression reading improves as the age get higher. Also, they performed better with the condition of face than eyes, and basic emotions than complex emotions. While female doesn't show any performance difference with the presenting areas, male shows better performance in case of facial condition compared with eye condition. The results demonstrate that age, facial expression's presenting areas and the type of emotions effect on estimation of other people's emotion through facial expressions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.491-497
• /
• 2006

Orthodontic seamless bands are frequently used in pediatric dentistry. In the process of seating bands with luting cement coated inside, not uniformed coating might bring about various problems such as enamel decalcification and/or gingivitis, and this clinical trial was made to review several band-seating methods to exclude these risks. One kind of band luting cement and one size of seamless bands were used on the resin replicas of an extracted maxillary and mandibular 1st molar with three different seating methods 1. seating the band with the luting cement coated only inside the band, 2. seating the band with the luting cement coated inside the band and on axial surfaces of the teeth, 3. seating the band with the adhesive tape on the occlusal opening of the band and the luting cement coated only inside the band. After cement was completely set, bands were peeled off from the teeth and the status of cement coating was evaluated. With this experiment more uniformed coating of the luting cement was found in latter two groups. These methods are thought more appropriate to almost completely rule out the risk of unevenly coated cement beneath the bands by conventional method.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.268-275
• /
• 2011

21C digital culture is now affecting the life of arts and development through our system, as well as body arts and body painting. Body painting is not has been focused through our lives in 21stcentury as one genre. UV body painting is from short to long wave length that demonstrates to us the dimension by science and lighting showing more than 8 colors that are better off being set. From this research the theory of body painting considerate characteristics and vision for it. From the researchers line, dots, and side shows the UV body painting as a one piece of art and analyzing the 3D theory and once again showing vision through what it's affecting to their result.' UV body painting is usage of floral paints and using so called 'black light' that shows the short and long term wavelength that provides the 3D material, but first, this is different from normal body painting like dots, like, and layers shows more thoroughly and shows focused motive and you can easily tell the difference. As of all UV body painting is showing more 3D vision more than the design itself. From all this research, to all the body painters we await the future practical theory to be used and for the better future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.706-713
• /
• 2016

In this study, the welding characteristics of friction stir welding were investigated in accordance with the tool plunge position and cooling to the base materials for the joining of dissimilar materials (A6005-AZ61). Other different welding conditions, such as the tool rotation speed and welding speed, were fixed to 500rpm-30mm/min, respectively, and welding was then carried out by placing the Mg alloy (AZ61) on the advancing side and Al alloy(A6005) on the retreating side. Welding was conducted under six different conditions. To investigate the welding characteristic, tensile test and microstructure observations using an optical microscope were carried out. As the tensile test result, the maximum strength appeared under the condition in which the tool is moved 1 mm to the Mg alloy direction and cooling to the base materials. Under the same welding conditions, the strength with cooling was approximately two times higher than that without cooling. The tool was located in each direction of 1.7 mm from the weld line. Therefore, in the excessive off-set of tool position, the welding integrity was in an extremely poor condition due to the lack of stirring. This study was confirmed by the A6005-AZ61 dissimilar friction stir welding the welding speed and the tool rotation speed. In addition, the temperature control and tool plunge position are important welding parameters.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.104-110
• /
• 2013

Purpose: Bedside ultrasonography is available in most emergency departments, and detecting the intracranial pressure is elevated is critical. Our objective is to evaluate the availability of bedside optic nerve ultrasound (ONUS) as a secondary survey for patients with head injuries in the emergency department (ED). Methods: From September, 2012, to March, 2013, we performed a prospective study of patients presenting to the ED after an accident. Patients with head injuries but without obvious ocular trauma or ocular disease were included. The ONUS was performed using a 3 to 12 MHz linear probe on closed eyelids after a primary survey. We analyzed the correlation between the brain computed tomography (CT) findings that suggested elevated intracranial pressure (ICP) and the Optic nerve sheath diameter (ONSD) measured by using ONUS. Results: A total of 81 patients were enrolled. Forty-seven had CT results consistent with elevated ICP, and their mean ONSD was $5.98{\pm}0.59$ mm; the mean ONSD of patients who showed no signs of elevated ICP on CT was $4.63{\pm}0.21$ mm. The sensitivity and the specificity for the ONSD, compared with elevated ICP, were 98.87% and 100%, respectively, when the cut-off value was set to 4.96 mm. The area under curve (AUC) was 0.997 in the receiver operating characteristic curve (ROC curve). Conclusion: An evaluation using ONUS is a simple noninvasive procedure and is a potentially useful tool as a secondary survey to identify an elevated ICP.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.363-375
• /
• 2017

The age and growth of pointhead flounder, Hippoglossoides pinetorum caught by gill nets was analyzed in this study from March 2015 to July 2017. New annuli were formed in H. pinetorum otoliths annually, and the boundary was set between the opaque and translucent zones from March and April. The relationships between total length (TL) and body weight (BW) were $BW=0.0025TL^{3.409}$ ($r^2=0.9551$) for females and $BW=0.0057TL^{3.138}$ ($r^2=0.9163$) for males. In this study, the ring of pointhead flounder, H. pinetorum was formed between 3 and 8 for females and between 3 and 6 for males. Total length (TL) and otolith radius (OR) were measured as follows: TL = 7.142 OR + 0.769 ($r^2=0.793$) for females and TL = 6.498 OR + 1.706 ($r^2=0.652$) for males. The mean distances of first ring ($r_1$) were 0.92 mm and 0.91 mm for females and males respectively. The TLs at the time of annulus formation, back-calculated from the otolith-length relationship by reference to the von Bertalanffy growth curves, were $L_t=43.59(1-e^{-0.15(t+0.007)})$ for females and $L_t=28.13(1-e^{-0.26(t+0.006)})$ for males while the growth between female and male was different.