• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.198-200
• /
• 2018

In this paper a single-stage single-phase differential type isolated AC-DC converter is proposed. This converter eliminates the requirement to use bulky electrolytic capacitor from the system and at the same time provides DC charging by employing the AC Power Decoupling waveform control method. All the switches of the converter achieve ZVS turn on during half line cycle and all diodes achieve ZCS turn off during entire line cycle. A conventional controller is implemented for PFC control and output regulation, whereas a power decoupling controller is added to compensate $2^{nd}$ harmonic ripple power. In addition, an interleaving technique is applied to increase the power range of the converter and reduce the input inductor size. In the end simulation verification is performed and results are obtained for 6.6KW.

• 전기의세계
• /
• v.31 no.1
• /
• pp.50-58
• /
• 1982

As a method for improving the power factor and the waveform of ac line current drawn by ac to dc converters, converters of pulse-width control type with forced commutation circuits have been developed in recent years. However, these converters have rather complex commutation circuits which contain auxiliary thyristors in addition to the main thyristors, and their performance is not satisfactory. This paper proposes a new pulse-width controlled ac to dc converter, and analyses its commutation mechanism and its input and output characteristics. The proposed converter circuit consists of a usual thyristor bridge circuit with series diodes to which reactors and diodes are added. This circuit dose not contain auxiliary thyristors, and in this sense it is simpler than the previous converter circuits of pulse-width control type. Since the main thyristors of the converter can be forcedly turned off several times in a half cycle of source voltage, a pulse-width modulation control is possible in order to improve the current waveform as well as the power factor on ac line side. As to dc output side it is shown that the adjustable range of output voltage is wide and the voltage regulation is good due to a rapid reversal of voltage across the commutating capacitors by LC resonance during commutation period. It is also shown that the regenerative operation of the converter is possible.

• Convergence Security Journal
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2005

This paper presents the content regarding electronic medical examination chart and data processing for efficient medical examination and fast treatment by realizing remote medical examination system of mutual conversation type among 3 parties(patient, doctor, pharmacist) on internet base, and establishment of database enabled system integration for efficient data processing in both on-line and off-line mode by interconnecting ASP and SQL on IIS 4.0 web server, consultation between patient and doctor, medical examination on off-line mode, transmission of prescription sheet to the pharmacist designated by patient, preparation of medicine, semieternal storage of medical examination data owing to storage and check of medical examination data, more accurate medical examination and prescription using this medical examination data by patient and doctor, and so on. And, data processing between doctor and pharmacist is differently performed based on class such as general member and charge member, and service access right pursuant to this is endowed, so that certification of each member must follow by all means.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.125-131
• /
• 2001

In this study, we compared the properties of 23 high and 55 low price sunglass lenses with the standards in the ordinary optical properties, materials, coloration, UV, IR and luminous transmittance, color acceptance for traffic signal, chromaticity and contrast sensitivity. The ordinary optical properties of the lenses met comparatively the requirements of the KS standard. The HIGH-type and LOW-type lenses were primarily made by glass and acrylate, respectively. In the coloration, HIGH-type was in group around neutral color but LOW-type was distributed widely on the line between 570 nm and 485 nm. There are fails in 7% of HIGH-type and 18% of LOW-type in the stimulus purity of the luminous transmittance. Wavelength of the UV/VIS cut-off was over 350 nm for HIGH-type but 6% of LOW-type was under 350 nm. In the erythemal UV, all HIGH-type met the needs of standards but 5 LOW-type failed with DIN standard In the near UV, KS standard worked in stringency, and HIGH-type showed more failure than LOW-type. The characteristics of the IR transmittance of HIGH-type was better than that of LOW-type. In the color acceptance of traffic signal, all HIGH-type met the needs of ANSI standards but 21.8% of LOW-type failed with the standard. In the contrast sensitivity tested with various coloured sunglasses, the value increased with increasing of Land decreasing of test distance. In view of the results so far, HIGH-type met with excellent properties as compared with LOW-type.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1237-1242
• /
• 2016

In this paper, the low pass filter with harmonics suppression and rejection using parallel coupled-line and radial type open stub is presented. And the resultant characteristic of the proposed low pass filter is that the harmonics are suppressed and rejected in wide bandwidth due to the parallel coupled-line structure. The open stub of a low pass filter is constructed in radial type which can be used to adjust the size of filter. The size of the proposed low pass filter is $6.98{\times}7.60mm2$ and the cut off frequency is 2.45 GHz. And the filter is economical in unit cost and can be constructed easily and has the merit of mass product because the filter is composed of distributed element. Also, the widely rejected harmonics is 128 % in the bandwidth and the insertion and return losses of the low pass filter are 1.07 dB and 19.5 dB, respectively.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2006

Constructing a long, linear structure such as a high-way may cause the break-up of the natural ecology by cutting off the trails of animals. We could observe 12 kinds of mammals, 49 kinds of birds and 10 kinds of amphibia and reptilia at the research area. With this research, we were so sure of the necessity of building ecological corridors to prevent the ecological break-up of wild animals that we studied the building and maintaining of 3 types of ecological corridors; tunnel types, over-bridge type and line type.

• Ocean Systems Engineering
• /
• v.8 no.2
• /
• pp.119-166
• /
• 2018

The assessment of the potential for the design of marine renewable energy systems is reviewed and the current situation for marine renewable energy is promising. The most studied forms of marine renewable energy are ocean wind energy, ocean wave energy and tidal energy. Wind turbine generators include mostly horizontal axis type and vertical axis type. But also more exotic ideas such as a kite design. Wave energy devices consist of designs converting wave oscillations in electric power via a power take off equipment. Such equipment can take multiple forms to be more efficient. Nevertheless, the technology alone cannot be the only step towards marine renewable energy. Many other steps must be overcome: policy, environment, manpower as well as consumption habits. After reviewing the current conditions of marine renewable energy development, the authors analyzed the key factors for developing a strong marine renewable energy industry and pointed out the huge potential of marine renewable energy.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.4
• /
• pp.212-221
• /
• 2003

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. A new rapid prototyping process, transfer-type variable lamination manufacturing process by using expandable polystyrene foam (VLM-ST), has been developed to reduce building time, apparatus cost and additional post-processing. At the same time, VLM Slicer, the CAD/CAM software for VLM-ST has been developed. In this study, algorithms for accuracy improvement of VLM-ST, which include offset and overrun of a cutting path and generation of a reference shape are developed. Offset algorithm improves cutting accuracy, overrun algorithm enables the VLM-ST process to make a shape of sharp edge and reference shape generation algorithm adds additional shape which makes off-line lamination easier. In addition, proposed algorithms are applied to practical CAD models for verification.

• Asia pacific journal of information systems
• /
• v.14 no.1
• /
• pp.1-21
• /
• 2004

Recently, many internet firms have opted the strategic alliances with other on/off-line firms in order to gain and sustain their competitive advantages. Previous research on market reaction to such alliances, however, shows mixed results. Therefore, the purpose of this thesis is to analyze the announcement effects of the alliances among internet firms in the stock market. Focusing on on-line firms that have been outside the scope of previous research, this study applied the event study methodology and examined the cumulative abnormal returns(CAR) for 245 alliance announcements between October 1998 and May 2002. Further, this study conducted a survey to categorize various types of announcements and 40 usable returns has been analyzed. The notable results from this study include: 1) The strategic alliances announcements do not have statistically positive effects on stock prices of the announcing firms. 2) Contrary to the results of the previous research, the CARs associated with marketing alliances are higher than those with technology alliances. 3) The degree of fitness among firms' disposition, their alliance purpose, and alliance type chosen influences the performance of their alliances.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.130-135
• /
• 2002

In this paper, it is designed mobile communication base station module type bandpass filter which is recently used coplanar waveguide in many way because of structural merit. Using Conductor-Backed Coplanar waveguide of Itoh, it is determined the value of impedance which had capable impedance value with selected H in 2.4 and proved the impedance of each sections. It use the commensurate line of $\lambda$/4, fixed a space of between two ground line and calculated the width of signal line. Because designed filter less than microstrip filter in space, it obtained excellent characteristic of 15dB throughout all passband and sharp cut-off characteristic.