• 제목/요약/키워드: Off-center

검색결과 1,783건 처리시간 0.032초

다구찌 방법을 적용한 Off-road 디젤 엔진의 분사조건 및 EGR 율 최적화에 관한 연구 (Study on Optimization of Fuel Injection Parameters and EGR Rate of Off-road Diesel Engine by Taguchi Method)

  • 하형수;안중규;박찬수;강정호
    • 한국자동차공학회논문집
    • /
    • 제22권7호
    • /
    • pp.84-89
    • /
    • 2014
  • Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

BOG 내부 열교환을 이용한 LNG 선박용 Boil-Off Gas 재액화 시스템 (Boil-Off Gas Reliquefaction System for LNG Carriers with BOG-BOG Heat Exchange)

  • 이윤표;신유환;이상훈;김광호
    • 대한조선학회논문집
    • /
    • 제46권4호
    • /
    • pp.444-451
    • /
    • 2009
  • The price increase of natural resources and the worldwide growth of LNG demand led to save the waste of Boil-Off Gas evaporating from cargo tanks of LNG carriers during navigation. As one of the efforts, a BOG reliquefaction system with BOG-to-BOG heat exchanging method was newly devised. This study was also discussed on the process details such as some features and advantages including comparisons with conventional BOG reliquefaction system, non BOG-BOG heat exchange type. The thermodynamic analysis for the system were also performed. Through the cycle simulation, the process efficiency of the BOG reliquefaction system BOG-BOG heat exchange was estimated to be increased up to 21%.

개흉술과 복부 절개술을 통한 심폐바이패스를 이용하지 않은 관상동맥 재수술 - 1예 보고 - (Off-pump Reoperative Coronary Artery Bypass by Thoracotomy and Laparotomy -A case report -)

  • 김정원;함시영;제형곤;조원철;송명근
    • Journal of Chest Surgery
    • /
    • 제39권9호
    • /
    • pp.710-713
    • /
    • 2006
  • 관상동맥우회술을 시행 받은 환자가 많아지면서 관상동맥 재수술의 빈도도 증가하고 있다. 또한 기술적인 발전으로 인하여 심폐바이패스 없이 시행하는 관상동맥우회술도 늘고 있다. 저자들은 관상동맥 우회술 후 재발된 76세 불안정성 협심증 환자에게 좌측 개흉술 및 상복부 절개술을 통한 관상동맥재수술을 시행하여 만족스러운 결과를 얻었기에 이를 보고하고자 한다.

유경성 대망 이식편을 이용한 농흉 치험 3례 (Surgical Treatment of the Postoperative Empyema with Omental Pedicle Flap [OPF] - Report of 3 Cases -)

  • 허용;문준호;안욱수;김병일;이정호;유희성
    • Journal of Chest Surgery
    • /
    • 제25권8호
    • /
    • pp.819-825
    • /
    • 1992
  • The omental pedicle flap[OFF] has been used for management of complicated problems in various fields of cardiovascular surgery. Its unique properties of enhancing neovascularity, relieving lymphedema, providing fibroblasts to promote healing, providing soft tissue coverage, & functioning in the face of existing infection make it ideal in managing many of the more complicated problems facing the thoracic surgeon. We have used omental pedicle for colosing of the bronchial fistula R esophageal fistula with filling the adjoining cavity after pneumonectomy. The successful closure of the bronchial stump with OFF were obtained in 2 cases, but one case was failed who was suffered from the esophageal fistula. The primary operation in each cases were right pleuropneumonctomy for tuberculous empyema in 2 cases & left pneumonectomy for chronic empyema in 1 case, We believe that the OFF is effective for closing fistula due to postoperative empyema k plombage procedures for dead space of infected thoracic cavity.

  • PDF

Nonvolatile Flexible Bistable Organic Memory (BOM) Device with Au nanoparticles (NPs) embedded in a Conducting poly N-vinylcarbazole (PVK) Colloids Hybrid

  • Son, Dong-Ick;Kwon, Byoung-Wook;Park, Dong-Hee;Yang, Jeong-Do;Choi, Won-Kook
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.440-440
    • /
    • 2011
  • We report on the non-volatile memory characteristics of a bistable organic memory (BOM) device with Au nanoparticles (NPs) embedded in a conducting poly N-vinylcarbazole (PVK) colloids hybrid layer deposited on flexible polyethylene terephthalate (PET) substrates. Transmission electron microscopy (TEM) images show the Au nanoparticles distributed isotropically around the surface of a PVK colloid. The average induced charge on Au nanoparticles, estimated using the C-V hysteresis curve, was large, as much as 5 holes/NP at a sweeping voltage of ${\pm}3$ V. The maximum ON/OFF ratio of the current bistability in the BOM devices was as large as $1{\times}105$. The cycling endurance tests of the ON/OFF switching exhibited a high endurance of above $1.5{\times}105$ cycles and a high ON/OFF ratio of ~105 could be achieved consistently even after quite a long retention time of more than $1{\times}106$ s.

  • PDF

300-W-class Side-pumped Solar Laser

  • Qi, Hongfei;Lan, Lanling;Liu, Yan;Xiang, Pengfei;Tang, Yulong
    • Current Optics and Photonics
    • /
    • 제6권6호
    • /
    • pp.627-633
    • /
    • 2022
  • To realize uniform side pumping of solar lasers and improve their output power, a solar concentrating system based on off-axis parabolic mirrors is proposed. Four identical off-axis parabolic mirrors with focal length of 1,000 mm are toroidally arranged as the primary concentrator. Four two-dimensional compound parabolic concentrators (2D-CPCs) are designed as a secondary concentrator to further compress the focused spot induced by the parabolic mirrors, and the focused light is then homogenized by four rectangular diffusers and provides uniform pumping for a laser-crystal rod to achieve solar laser emission. Simulation results show that the solar power received by the laser rod, uniformity of the light spot, and output power of the solar laser are 7,872.7 W, 98%, and 351.8 W respectively. This uniform pumping configuration and concentrator design thus provide a new means for developing high-power side-pumped solid-state solar lasers.

세계일류여자높이뛰기선수의 발구름 기술에 대한 바이오메카닉스적 분석 (Biomechanical Analysis of Take-Off Techniques of Women's High Jump Winners at IAAF World Championships, Daegu 2011)

  • 배영상;김의환;김기만;이정민;김성섭;권문석;위웅량
    • 한국운동역학회지
    • /
    • 제21권5호
    • /
    • pp.585-593
    • /
    • 2011
  • The purpose of this study was to analyze, from a kinematical point of view, the high jump techniques of three women's high jump winners at the IAAF World Championships, Daegu 2011. The trends for the techniques of the world's top high jumpers were examined, with a view toward adapting these techniques to the physical characteristics of Korean women's high jumpers. It was valuable that Di Martino, who was the shortest in height, was able to win a medal by using a single arm swing take-off technique, along with a half flexed leading leg swing to attain a deep arch and clear the bar. This showed that the world's top athletes used jumping techniques with no decrease in the run-up velocity at the take-off. Furthermore, It appeared that the knee joint angle at take-off had a direct effect on the body position at take-off (H1).

공기윤활 범프 저어널 베어링의 부상 특성에 관한 연구 (A Study on the Lift-off Characteristics of an Air-lubricated Bump Foil Journal Rearing)

  • 이용복;김창호;이남수;최동훈
    • Tribology and Lubricants
    • /
    • 제17권6호
    • /
    • pp.441-446
    • /
    • 2001
  • In this paper the effect of bump compliance, load, and the number of pad on the lift-off speed is studied. When the load is greater and bump compliance lower, the shaft is lifted off at higher rotating speed. And when the load is applied near the center of pad, lift-off speed is lower. When the number of pad increases, the lift-off speed is higher. The lift-off characteristics can be used to lengthen the lift time of the coating and design the rotating machinery supported by bump bearings.

Baffle design and test for wide-field off-axis telescopes

  • 김상혁;박수종;장성혁;김권희;양순철;;허명상;임명신
    • 천문학회보
    • /
    • 제38권1호
    • /
    • pp.72.2-72.2
    • /
    • 2013
  • An off-axis telescope has several advantages in optical performance comparing with a conventional on-axis telescope. However, in general, an off-axis telescope has a narrow field of view due to the linear astigmatism caused by the asymmetric structure. It was shown in the previous work that the linear astigmatism can be eliminated by properly configuring parameters in a confocal off-axis reflector system. Furthermore, the third order aberrations of a confocal off-axis telescope can be minimized by optimizing the shape of the mirrors. Despite many advantages, the confocal off-axis telescopes have been evaded because of difficulties of off-axis mirror fabrication, alignment process and unaccustomed off-axis baffle design. The baffle for the off-axis telescope should be designed considering that the effects of stray lights are different because of the asymmetry of off-axis system. In this poster, the design, manufacturing, and test for the baffle and housing of an off-axis telescope are presented.

  • PDF

FEM을 이용한 GIS내 부분방전 신호의 전파특성 해석 (Analysis of Partial Discharge Signal Propagation Characteristics in GIS Using FEM)

  • 이도훈;이현동;이용희;박기훈;류강열;신양섭
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1835-1837
    • /
    • 2004
  • The UHF electromagnetic waves excited by PD pulses propagate along the GIS busbar not only TEM mode, but also TE and TM mode. Generally the waves detected by the UHF sensors are those of high order modes and such waves can only propagate the higher than cut-off frequency. In this paper, computed cut-off frequency of 362[kV] GIS by each modes and simulated electromagnetic field of each propagation modes by FEM(Finite Element Method) program. Frequency band of each TEmn/TMmn modes were determinated by simulation results and were discussed optimal position of UHF sensor from this results.

  • PDF