• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1092-1097
• /
• 2004

The heat (mass) transfer characteristics on the endwall surface of a first-stage linear turbine rotor cascade at off-design conditions has been investigated by employing the naphthalene sublimation technique. The experiments are carried out at the Reynolds number of $2.78{\times}10^{5}$ for two incidence angles of -5% and +5%. The positive incidence angle results in intensification of the pressure-side leg of a leading-edge horseshoe vortex, which delivers higher heat transfer along its trace. On the other hand, the negative incidence angle show an opposite tendency.

• 한국항공우주학회지
• /
• 제47권3호
• /
• pp.195-203
• /
• 2019

극초음속 영역에서 운용되는 스크램제트엔진의 흡입구는 엔진 전체 성능에 직접적으로 연관되어 있으므로 개발에 앞서, 다양한 조건에서의 성능 특성 분석이 필수적이다. 본 연구에서는 축대칭 내부 압축형 흡입구인 Busemann과 외부 압축형 흡입구 형상을 설계하고, 설계점 및 탈설계점에서의 전산해석을 수행하였다. 해석결과를 토대로, 마하수와 받음각에 대한 극초음속 흡입구의 전반적인 성능 특성을 파악하였다. Busemann 흡입구는 $2^{\circ}$의 Truncation 각에 따라 흡입구의 길이를 단축하여도 성능 저하가 미미하였으며 탈설계 마하수에서는 흡입구 성능이 우수하였으나, 받음각이 있는 경우 시동 특성이 크게 저하되었다.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2167-2176
• /
• 1994

This paper presents some useful design criteria for the turbine cogeneration system through both the design and off-design analysis. Comparative analysis of the part load performance is carried out for several gas turbines which have different design parameters represented by the turbine inlet temperature and pressure ratio. It is shown that the variation in part load efficiency considerably depends on the design parameter. The off-design operation of the heat recovery steam generator is simulated by introducing adequate assumptions for the heat transfer process. It is turned out that the design parameters of heat recovery steam generator should be determined by considering the favorable operation at the off-design conditions.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1144-1153
• /
• 2002

A hybrid performance prediction method is proposed in the present study. A channel diffuser is divided into four subregions: vaneless space, semi-vaneless space, channel, and channel exit region. One-dimensional compressible core flow and boundary layer calculation of each region with an incidence loss model and empirical correlation of residuary pressure recovery coefficient of a channel predict the performance of diffusers. Three channel diffusers are designed and tested for validating the developed prediction method. The pressure distributions from an impeller exit to the channel diffuser exit are measured and discussed for various operating conditions from choke to nearly surge conditions. The strong non-uniform pressure distribution which is caused by impeller-diffuser interaction is obtained over the vaneless and semi-vaneless spaces. The predicted performance shows good agreement with the measured performance of diffusers at a design condition as well as at off-design conditions.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.83-90
• /
• 2001

Experimental and numerical investigations of the off·design performance of a simple channel-wedge diffuser in a small centrifugal compressor are presented. Surge and choke conditions as well as design point are considered using somewhat limited range of experimental data and also supplementary 3D CFD results. Some critical meanline design parameters' behavior is investigated numerically, to render the basis for improved modelings in the meanline performance prediction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.789-794
• /
• 2001

In this study, a program for the off-design performance prediction of multi-stage axial-compressors is developed based on stage-stacking method. To account for the increased losses at off-design conditions, generalized performance curve is applied. The purpose of this study is to investigate the influence of the choice of generalized performance curve and stator exit angle. For this purpose, we tested various generalized performance curves and stator exit angles. In conclusion, Muir's pressure coefficient curve gives a good prediction results regardless of the efficiency curve for a low-stage compressors. On the other hand, for high-stage compressors, The combination of Muir's pressure coefficient curve and Stone's efficiency curve gives a optimistic results. Stator exit angle has a small effect on overall performance curve.

• 소성∙가공
• /
• 제14권1호
• /
• pp.37-42
• /
• 2005

In order to invstigate the influence of die design variables on the quality of the sheared surface in cutting of sandwich sheet metals, the cut-off operation is carried out, which is the typical shearing process in sheet metal forming technology. For experiments we made the cut-off die which can be easily adjusted for die design variables such as blankholding force, pad force and clearance. The sandwich sheet metals considered are clad304(STS304-Al1050-STS304) and anti-vibration sheet metal. The shearing process is visualized by the computer vision system installed in front of the cut-off die and the sheared surface is measured and quantitatively compared with the help of the optical microscope after cut-off operation. From test results it is shown that the shearing mechanisms are different according the material of which sandwitch sheet metal is composed. The influence of die design variable is explored and we found optimal conditions for both sandwich sheet metals. It is expected that this investigation can be utilized to get the better sheared surface.

• 대한교통학회지
• /
• 제25권4호
• /
• pp.79-87
• /
• 2007

도시고속도로의 인터체인지는 대규모의 유출교통량과 인접교차로의 잦은 지정체로 인하여 교통운영상 많은 문제점을 내포하는 지점으로 알려져 있다. 도시부 고속도로의 인터체인지에서 분류된 유출교통류는 가장 가까운 인접 신호교차로의 운영상태 및 교통량상태에 의해서 영향을 받게 된다. 이러한 인접교차로의 영향으로는 인접가로의 대기행렬이 유출연결로의 가로접속부까지 형성되었을 경우, 유출교통량이 인접가로로 진입하지 못하고 유출연결로상에 대기행렬을 형성하여 정체가 심해지면 고속도로 본선에까지 영향을 미치게 된다. 이러한 문제로 인해 유출연결로와 접속되는 인접가로의 위치가 주변 교차로의 교통류 상태에 중요한 변수로 작용하게 되는데 현재 설계기준으로는 이러한 영향까지 고려한 기준을 제시하지 못하고 있는 실정이다. 본 연구는 인접교차로의 운영에 대한 영향을 고려하여 인접교차로에서 유출연결로까지의 간격을 구하는 모형식을 개발하고자 한다. 인접교차로로 인해 유출연결로의 교통류에 영향을 미치는 변수로는 유효녹색비(g/C), v/c비(교통량 대 용량비), 가로차로수와 유출연결로교통량이 선정되었다. 이러한 변수들에 대한 영향을 반영하고자 시뮬레이션 프로그램(VISSIM)을 이용하여 도로망을 구축하고 변수들의 다양한 조건을 반영한 시나리오를 작성하였다. 각 시나리오별로 구성된 교통, 도로, 신호조건을 반영한 인접가로의 대기행렬길이를 시뮬레이션하여 결정하고, 이러한 대기행렬길이가 인접교차로와 유출연결로 접속부와의 간격을 결정하는 중요한 기준치로 사용되었다. 시뮬레이션 분석결과, 시나리오별로 다양한 대기행렬길이가 산정되었고 사용된 변수와 대기행렬길이를 이용하여 회귀모형식을 개발하였다. 개발된 회귀모형식은 인터체인지의 계획 및 설계시 인접교차로와의 관계를 고려하여 유출연결로의 위치를 결정하는 설계기준에 반영할 수 있을 것이고, 이로 인해 향후 인터체인지 주변의 교차로 운영과 고속도로 본선 교통류의 효율적 관리에 기여할 것으로 기대된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.548-554
• /
• 2000

The aim of this paper is to understand the time averaged pressure distributions in a high-speed centrifugal compressor channel diffuser at design and off-design flow rates. Pressure distributions from the impeller exit to the channel diffuser exit are measured and discussed far various flow rates from choke to near surge condition, and the effect of operating condition is discussed. The strong non-uniformity in the pressure distribution is obtained over the vaneless space and semi-vaneless space caused by the impeller-diffuser interaction. As the flow rate increases, flow separation near the throat, due to large incidence angle at the vane leading edge, increases aerodynamic blockage and reduces the aerodynamic flow area downstream. Thus the minimum pressure location occurs downstream of the geometric throat, and it is named as the aerodynamic throat. And at choke condition, normal shock occurs downstream of this aerodynamic throat. The variation in the location of the aerodynamic throat is discussed.

• 방사성폐기물학회지
• /
• 제2권1호
• /
• pp.13-22
• /
• 2004

This study presents the thermal analyses of a spent fuel dry storage cask under normal and off-normal conditions. The environmental temperature is assumed to be 15 $^{\circ}C$ under the normal condition. The off-normal condition has an environmental temperature of 38 $^{\circ}C$. An additional off-normal condition is considered as a partial blockage of the air inlet ducts. Two of the four air inlet ducts are assumed to be completely blocked. The significant thermal design feature of the storage cask is the air flow path used to remove the decay heat from the spent fuel. Natural circulation of the air inside the cask allows the concrete and fuel cladding temperatures to be maintained below the allowable values. The finite volume computational fluid dynamics code FLUENT was used for the thermal analysis. The maximum temperatures of the fuel rod and concrete overpack were lower than the allowable values under the normal and off-normal conditions.