• 제목/요약/키워드: Odor simulator

검색결과 4건 처리시간 0.017초

악취 배출구의 합리적인 배출규제를 위한 사례연구 (A Case Study for Reasonable Emission Regulation of Odor Exhaust Stack)

  • 박정호;이형천
    • 한국환경과학회지
    • /
    • 제25권1호
    • /
    • pp.155-161
    • /
    • 2016
  • In this study, field experiment, odor simulator, and dispersion modeling were used to evaluate the odor impact from J sewage sludge treatment facility. The height and flow rate of exhaust stack at this facility were 22.3 m and $100Nm^3/min$. The mean odor concentrations of the wet scrubber inlet and exhaust stack were $267{\pm}160$ and $93{\pm}44OU/m^3$, respectively. The odor removal efficiency of wet scrubber showed 65%. The odor simulator is used for the regulated standard calculation of the exhaust pipe(stack). Resulting odor emission rate(OER) by odor simulator was $2.4{\times}10^6(24,000OU/m^3)$. The forecasting result by Screen3 modeling showed that odor exhaust concentration up to $30,000OU/m^3$ was't exceeded maximum allowable emission level on site boundary($15OU/m^3$).

전동차 조합시험을 위한 부하 시뮬레이터에 관한 연구 (A Study on Load Simulator for Traction system combined testing)

  • 김길동;이한민;오세찬;박성혁;김종대
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1643-1645
    • /
    • 2005
  • A newly-built inverter has to undergo a series of stress tests in the final stage of production line. This can be achieved by connecting it to a dynamometer consisting of a three-phase machine joined by a rigid shaft to a DC load machine. The latter is controlled to create some specific load characteristic needed for the test. In this paper a test method is proposed, in which no mechanical equipment is needed. The suggested test stand consists only of a inverter to be tested and a simulator converter. Both devices are connected back- to-back on the AC-side via smoothing reactors. The simulator operates in real-time as an equivalent load circuit, so that the device under test will only notice the behaviour of a three-phase machine under consideration of the load. In odor to wove rightness of the suggested test method, the simulation and actural experiment rallied out emulation for a 2.2kW induction motor.

  • PDF

멀티미디어용 칩타입 향 발생장치 개발 (Development of an Odor Generation Device with Chip Type for Multimedia Application)

  • 김성중;양길태;김종윤
    • 한국감성과학회:학술대회논문집
    • /
    • 한국감성과학회 2000년도 추계학술대회 논문집
    • /
    • pp.228-230
    • /
    • 2000
  • 본 연구에서는 시청각 위주의 VR 멀티미디어 환경에 후각자극을 제시함으로써 더욱 현장감 있는 상황을 느낄 수 있는 칩타입 향 발생장치를 개발하였다. 셀마다 향과 Heating Coil을 함유하고 있는 IC 타입의 향 Container, DC Motor와 IC Holder를 포함하는 향 Housing, 전체적인 제어를 담당하는 Hardware Controller와 후각정보가 Encoding된 멀티미디어로 구성된다. 멀티미디어 매체 제작시 각 Object에 대한 Bounding Box를 설정하여 해당 영역에서만 향이 발산되도록 하였고 향발생장치를 Virtual Driving Simulator에 적용하여 화면의 영상과 함께 해당 향이 잘 발산되어 더욱 현실감 있는 VR 멀티미디어를 구현하였다.

  • PDF

백상지 공정 폐쇄화에 따른 백수 내 산화전분의 축적 현상에 관한 연구 (제1보) -공정 폐쇄화의 영향- (A Study on the Accumulation Phenomena of Oxidized Starch in White Water in Closed Fine Papermaking Process (Part 1) -Effect of Papermaking system closure-)

  • 안현견;이학래
    • 펄프종이기술
    • /
    • 제36권3호
    • /
    • pp.15-34
    • /
    • 2004
  • Diverse benefits such as reduction of fresh water consumption and effluent discharge, efficient use of raw materials and energy savings can be obtained by papermaking system closure. Closure of papermaking processes, however, causes many problems including reduction of the efficiency of additives, decrease of retention and dewatering, felt plugging, poor Paper quality, generation of slime and odor, poor vacuum efficiency, etc, and it has been recognized that accumulation of Inorganic and organic substances in the process white water is the prime cause of these problems. Therefore, technological developments for preventing accumulation of these detrimental substances are urgently required for Implementing papermaking system closure. Understanding of the accumulation phenomena of the inorganic and organic substances in the papermaking process white water is prerequisite for papermaking system closure. In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch In the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Starch adsorption and desorption models were developed based on the concept of starch adsorption ratio, which was not considered in previous studies. Steady state simulation studies were carried out based on this model using a commercial simulator. In steady state simulation, the variation of dissolved starch concentration in each process unit was monitored as a function of white water usage for wire shower. The result of the steady state simulation showed that dissolved starch concentration and its increase ratio in Process units increased as white water usage ratio for wire shower increased.