• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.962-965
• /
• 2005

A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.

• 소음진동
• /
• 제4권3호
• /
• pp.377-384
• /
• 1994

This paper is an investigation of the performance of absorption diffusers to suppress the vent noise emitted when high pressure gas is throttled. First, experiment for the static performance is carried out. When there is no through-flow, the insertion loss has been obtained in terms of 1/3 octave band spectrum and the effect of the number of diffusers and the thickness of the absorption material on the static performance has been obtained. And the similarity in the spectrum of the static insertion loss is confirmed by comparing two similar models with different size. Second, the dynamic performance has been obtained by experiment using blow-down of compressed air from a storage tank through an orifice of diameter 10 mm. The back pressure by the diffuser is measured and compared with that of a single diffuser. It is found that the insertion loss of asingle diffuser is very low around 3 dB at high frequencies with negative value at low frequencies. By absorption material between the diffuser tubes, however, the performance is increased considerably. Without flow the static insertion loss increases by 3 - 4 dB by doubling the thickness or the density of the absorptionmaterial. With flow, however, the dynamic insertion loss increases. While, the back pressure by the diffuser is small enough to be neglected.

• 오토저널
• /
• 제11권1호
• /
• pp.57-67
• /
• 1989

본 연구에서는 음향 인텐시티법을 가솔린 엔진에 직접 적용하여, 각각의 중심주파수별 음향인텐시티 응답특성을 1/3옥타브 밴드로 구하였고, 오버올 레벨 및 최대 인텐시티레벨을 갖는 중심주파수에서의 음향 인텐시티 방사특성을 등고선 및 3차원 표시로 나타내었다. 또한 그 결 과를 분석 및 고찰하여 엔진의 중요 소음원을 검출하므로써 이 수법이 소음대책에 유효하다는 것을 검증하였다. 연구 결과, 오버올 레벨에서는 아이들링 상태의 경우 엔진 전면부에서, 2,000 rpm 상태의 경우 엔진 우측부에서 가장 높은 음향 인텐시티가 방사되었으며, 최대 인텐시티레 벨을 갖는 중심주파수에서는 오일팬과 흡, 배기매니홀드가 100Hz에서 가장 높은 음향 인텐시티를 나타내었다.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.83-89
• /
• 1996

The objective of this study is to find experimentally the characteristics of the noise generated by the impinging jet on the normal plate, and also to compare the noise characteristics of the impinging jet with those of the free jet. The experiment is performed for the measurement of the noise specturm, the noise power, and the directivity for the free and impinging jets. From the experiment. it is found that the power of noises generated by the free jet as well as the impinging jet is proportional to the eighth power of the jet velocity through the circular converging nozzle, and that the noise power of the impinging jet is 15dB as high as one of the free jet when the plate distance is about within one to three times the nozzle diameter at the pressure ratio 1.39. The sound pressure level of the impinging jet depends upon the jet pressure and the plate distance. The plate distance with the maximum overall sound pressure level is increased with the jet pressure. The directivities with 1/3 octave band frequency for both the free jet and the impinging jet are greatly influenced by the convection effect.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.362-367
• /
• 2018

This study estimates the sound absorption capability of rice straw particle mats by two methods: the transfer function method and the reverberation room method. In the reverberation method, the central frequency was set to the one-third octave band in the 100-5000 Hz range; in the transfer function method, the frequency range was 500-6400 Hz. Both methods yielded similar noise reduction coefficients of the rice straw mats. The noise reduction coefficient was approximately 0.8, indicating a high sound-absorption property of the mats. Therefore, rice straw matting is a suitable candidate material for sound-barrier walls against highway noise.

• 한국음향학회지
• /
• 제22권3호
• /
• pp.233-241
• /
• 2003

한반도의 연근해에서 9년간 ('90∼'98)에 걸쳐 200m이내의 수심을 보이는 13개 정점에서 배경소음을 측정한 자료를 환경별로 통계 처리하여 소음준위를 분석하였다. 주파수 스펙트럼은 1/3옥타브 밴드의 중심주파수 25㎐부터 20㎑까지 분석하였다. 분석결과, 대양의 배경소음스펙트럼으로 알려진 Wenz의 결과와는 다소간의 차이를 보여주었다. 연근해에서 측정된 결과는 다양한 선박활동 및 연안소음, 파도의 영향 등으로 인해 같은 조건에서의 대양의 결과 보다 높은 배경소음준위를 보이고 있었으며, 통계분석에 근거하여 천해 소음 추정식을 산출하였다.

• 한국수산과학회지
• /
• 제8권1호
• /
• pp.1-6
• /
• 1975

복잡하게 운동하고 있는 예망어구에서 발생하는 여러 가지 소음들을 분석 녹음하기 위해 수중 녹음장치를 제작하여 실제 소형 트로올망의 수중소음을 녹음 하였으며, 본 수중 녹음장치는 이동하고 있는 어구에서 발생하는 수중소음을 녹음하는데는 편리하고 효과적이었고 spectrum의 분석 결과는 다음과 같다. 1) 예일중인 트로올망의 수중소음이 주된 음원은 어구의 발줄과 해저와의 마찰에 의한 소음이라는 것을 알았다. 2) 이동중의 트로올망의 수중소음의 주파수 분포는 $DC\~5000\;Hz$이고 그중 우세한 주파수는 약 $500\~700Hz$ 였다. 3) 트로올망의 절대음압의 최대는 50m 수심에서는 약 22 dB이었다.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.676-684
• /
• 2012

Numerical analysis was performed to investigate the heavy-weight impact noise of apartment houses. The FEM is practical method for prediction of low-frequency indoor noise. The results of numerical analysis, the shape of the acoustic modes in room-2 are similar to that of acoustic pressure field at the fundamental frequency of acoustic modes. And the acoustic pressure was amplified at the natural frequency of the acoustic modes and structural modes. The numerical analysis result of sound pressure level at 63 Hz and 125 Hz octave-band center frequency are similar to the test results, but at 250 Hz and 500 Hz have some errors. Considering most of bang-machine force spectrum exists below 100 Hz, the noise at 250 Hz and 500 Hz are not important for heavy-weight impact noise. Thus, the FEM numerical analysis method for heavy-weight impact noise can apply to estimate heavy-weight impact noise for various building systems.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.357-364
• /
• 2011

In this study, ring-shaped acoustic resonators were proposed to be installed in a silencer to increase the acoustic performance of silencer in the low-frequency range. Evaluation of noise reduction performance of acoustic resonator arrays was carried out by measuring the random-incidence absorption coefficient. It was found that the absorption coefficient of resonator array was measured up to 1 at 125 Hz of 1/3-octave band center frequency. Insertion losses of silencers with ring-shaped acoustic resonator arrays were measured based on ISO 7235. The results were shown that the ring-shaped resonator could increase the insertion loss up to 13 dB without flow, whereas 7 dB when flow speed reached 15 m/s. As increasing the flow speed above 15 m/s, the effect of acoustic resonator decreased due to the effect of nonlinear air damping of the resonator. It was also found that the increment of pressure drop by the presence of resonator arrays was about 9 % at flow speed of 25 m/s.

• 방송공학회논문지
• /
• 제16권3호
• /
• pp.483-489
• /
• 2011

본 논문에서는 광대역, 양호한 복사패턴, 그리고 고이득 특성을 갖는 새로운 안테나를 제안하였다. FDTD(Finite Difference Time Domain) 법을 이용하여 본 안테나를 해석하였으며, 안테나의 파라메타는 최대대역폭을 갖도록 최적화 설계하였다. 측정한 결과, 안테나의 대역폭은 0.839 옥타브(S11${\leq}$-10 dB). 그리고 제안된 안테나의 측정된 교차편파 복사패턴은 -25dB이하의 우수한 특성을 보였다. 안테나의 측정된 반사손실과 복사패턴 특성도 나타내었으며, 측정된 대역폭 특성은 FDTD 결과와 비교적 잘 일치하였다. 제안된 안테나는 MIMO, LAN, 의료기기, 그리고 방송용 시스템에 적용할 수 있다.