• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.176-181
• /
• 2009

This study is part of a project to develop and improve mooring systems for oceanographic use that include an electro-optical sensor, 1MHz Nortek Aquadopp Doppler Profiler and AIRMAR multipurpose Sensor. The adaption of Doppler current profilers to measure directional wave spectra has provided a new instrumentation approach to coastal and nearshore oceanographic studies. The HEIOB is developed are light weight and of a compact design, and can be easily installed in marine environment. Since there are no base station and gateways in marine environments, we selected CDMA and Orbcomm to send the data information. Therefore, the data can be sent by either e-mail service or Short Message Service (SMS). This paper will present some of scientific sensor results regarding real-time oceanographic and meteorological parameters such as wind spend, wind direction, wave direction, and etc. The modeling and test results highlight the engineering challenges associated with designing these systems for long lifetimes. It can also be used in future application to build wave observation buoy network in real-time using multiple ubiquitous buoys that share wave data and allow analysis of multipoint, multi-layer wave profiler.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.89-95
• /
• 2009

The purpose of the present study was to evaluate the safety under extreme environmental conditions and the dynamic safety under service environment conditions, of oceanographic buoy mooring systems consisting of a variety of materials, including chain, wire rope, nylon rope, and polypropylene rope. For the static safety assessment of a mooring system, after the calculation of external forces and the division of a mooring system into finite elements, the numerical integral was conducted to yield the elemental static tension until satisfying the geometrical convergence condition. To evaluate the dynamic safety, various processes were considered, including data collection about the anticipated areas for mooring, a determination of the parameters for the interpretation, the interpretation of the dynamic characteristics based on an analytic equation that takes into account the heave motion effect of a buoy hull and a mooring system, and a fatigue analysis of the linear cumulative damage. Based on the analysis results, a supplementary proposal for a wire rope that has a fracture in an actual mooring area was established.

• International Journal of Ocean System Engineering
• /
• v.3 no.4
• /
• pp.209-217
• /
• 2013

This paper presents a mooring design procedure for a floating offshore wind turbine. Offshore environmental data for Jeju are taken from KHOA (Korea Hydrographic and Oceanographic Administration) and used for the environmental conditions in numerical analyses. A semi-submersible-type floating wind system with a 5-MW-class wind turbine studied by the DeepCwind Consortium is applied. Catenary mooring with a studless chain is chosen as the mooring system. Design deliverables such as the nominal sizes of chain and length of the mooring line are decided by considering the long-term prediction of the breaking strength of the mooring lines where a 100-year return period is used. The designed mooring system is verified using a fatigue calculation based on rain-flow cycle counting, an S-N curve, and a Miner's damage summation of rule. The mooring tension process is obtained from time-domain motion analyses using ANSYS/AQWA.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.205-212
• /
• 1997

The major subject of this paper is the conceptual design of a cable-buoy system based on mechanics of floating bodies and mooring lines. The goal is to present a systematic relevant analysis procedure for the conceptual design of oceanographic buoy systems. The dynamics of a free floating body with an anchoring line is studied and a model is proposed through the primary engineering.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.300-310
• /
• 2014

This paper presents a mooring design procedure of a floating offshore wind turbine. The environment data of south offshore area of Jeju collected from Korea Hydrographic and Oceanographic Administration(KHOA) are used for hydrodynamic analyses as environmental conditions. We considered a semi-submersible type floating wind turbine based on Offshore Code Comparison Collaborative Continuation(OC4) DeepCWind platform and National Renewable Energy Laboratory(NREL) 5 MW class wind turbine. Catenary mooring with studless chain is chosen as the mooring system. Important design decisions such as how large the nomial sizes are, how long the mooring lines are, how far the anchor points are located, are demonstrated in detail. Considering ultimate limit state and fatigue limit state based on 100-year return period and 50-year design life, respectively, longterm predictions of breaking strength and fatigue are proposed.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.249-254
• /
• 2008

Moored ocean buoys are technically feasible approach for making sustained time series observation in the oceans and will be an important component of any long-term ocean observing system. The 3M disc buoy carried Zeno 3200, MCCB, Orbcomm, Global Star and Bluetooth module. The deployments have relied on Orbcomm and Global Star as the primary satellite communications system. In addition to detailing our practical experience in the use of Orbcomm and Global Star as high latitudes, we will present some of scientific sensor results regarding real-time oceanographic and meteorological parameters such as wind speed, wave height and etc. In this paper we present the design and implementation of a small-scale buoy sensor network. One of the major challenges is that the network is hard to access after its deployment and hence both hardware and software must be robust and reliable.

• Ocean and Polar Research
• /
• v.33 no.spc3
• /
• pp.359-369
• /
• 2011

This study documents KORDI's experience of successfully deploying a deep ocean buoy for monitoring oceanic and atmospheric variabilities in the tropical western Pacific Ocea nsince May 2010. The primary focus of this study was to compare TRITON (big and old type) with m-TRITON (smaller and new type) buoys within the JAMSTEC's buoy management system. The objective of operating a KORDI buoy is to ascertain oceanic variability in the tropical western Pacific. We adopted a slack-line mooring type to observe water temperatures at six layers from surface to 400 m depth. However, we could not acquire satisfactory results due to lack of expertise in buoy management system. A new KORDI buoy has been developing, which has been modified from both buoys, and ARGOS-3 satellite system and a slack-type mooring line.

• Ocean and Polar Research
• /
• v.36 no.1
• /
• pp.59-69
• /
• 2014

The long-term mooring performed at a KOGA station, located at about $30^{\circ}20^{\prime}N$, $126^{\circ}12^{\prime}E$ in the East China Sea shelf, shows some different behaviors between "semi-diurnal" and "diurnal currents" defined as the currents with periods around, respectively, a half day and a day. They appear to be predominantly tidal having significant coherences with sea level changes around the semi-diurnal and diurnal frequencies. The "semi-diurnal current" is strongly barotropic all year round. However, contrastingly, it is largely baroclinic in summer in the area about 70 km nearer to the continental slope, referred to as the "slope-area", as was found in previous current observations. The "diurnal current" of tidal origin is strongly barotropic in winter. In spring and summer, however, it becomes more baroclinic although it still remains largely barotropic, also showing more of its barotropic nature than in the "slope-area". The inertial oscillation contributing to the "diurnal current" appears to be more prominent when the current is baroclinic, indicating the important role played by stratification in generation of inertial oscillations. Downward energy propagation of inertial oscillation is not observed, suggesting that it is not created at the surface by wind. Considering that the study area is both near a critical latitude and proximity to the continental slope, it is suggested that parametric subharmonic instability (PSI) plays a significant role in creating the baroclinic inertial oscillation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.47-57
• /
• 2007

Real-time oceanographic information system was developed using platforms of aquaculture farms to examine causes of mass mortality of hatchery fishes, and to reduce the damage of mass mortality which has been occurred frequently off coast by abnormal change of ocean conditions. The system had the advantages of direct data distribution to fishermen at the farm and instant maintenance of equipments due to easy access to the farms and residents at the farms in comparison with offshore mooring buoy system. To avoid discontinued measurement of the system, repairs caused by malfunction of equipments, bimonthly preventive maintenances and daily monitoring of measured data were systematized. Confidence intervals calculated by a statistical method using accumulated data were applied to data management. Such activities could minimize discontinuance of measurement and keep information more trustful. In addition, the system has various ways of data distribution. Through homepage and e-mail in the internet, information was provided to public. Display units which were connected to equipments at the farm gave the measured data directly to fishermen, which guided them to run their farm scientifically. Finally large display unit was installed at a fish market and showed the measured data at the nearest station with tide and weather information. Proper region for aquaculture and wintering region were studied using temperature data obtained by the system in 2006. The system will contribute to reduce economic damage of coastal fishery and to understand coastal marine environment.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.2
• /
• pp.37-48
• /
• 2006

HF radar-derived current data obtained in 2002 and 2004 are analyzed to examine the effects of the completion of the Saemangeum 4th tidal dyke in June 2003, connecting Gogunsan-Gundo and Bieung-Do, on the coastal surface $M_2$ current pattern. Comparison between the currents by HF radar and current meter mooring showed good agreements. Counterclockwise rotation of the $M_2$ current in the observed area did not change with the dyke construction. Strong westward ebb jet from the gap of the dyke was observed in 2002 but disappeared in 2004. The complete closing of the dyke gap caused the current speed increase around the mouth of the Kem River estuary, decrease around Gogunsan-Gundo and the dyke, the changes in the direction of maximum current to north-ward from eastward and the delay of the maximum flood current occurrence around Gogunsan-Gundo and the dyke. Around Yeon-Do, the maximum flood current directed more clockwise and occurred rather earlier. These changes of the $M_2$ current ellipse characteristics imply that the effects of the dyke construction reached the area connecting Mal-Do and Yeun-Do.