• 한국해양공학회지
• /
• 제31권3호
• /
• pp.202-207
• /
• 2017

This paper presents the results of an experimental study on the motions and mooring characteristics of a floating vertical axis wind turbine system. Based on a comparison of regular wave experiment results, the motions of structures with different types of mooring are almost the same. Based on the tension response results of a regular wave experiment with a catenary mooring system, the mooring lines in front of the structure have a larger tension effect than the back of the structure by the drifted offset of the structure. The dynamic response spectrum of the structure in the irregular wave experiments showed no significant differences in response to differences in the mooring system. As a result of the comparison of the tension response spectra, the mooring lines have a larger value with a drifted offset for the structure, as shown in the previous regular wave experiment. The results of the dynamic response of the structure under irregular wave and wind conditions showed that the heave motion response is influenced by the coupled effect with the mooring lines of the surge and pitch motion due to the drifted offset and steady heeling. In addition, the mooring lines in front of the structure have a very large tension force compared to the mooring lines in back of the structure as a result of the drifted offset of the structure.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.54-60
• /
• 2006

For optimal design of a deep-sea ocean mining collector system, based on self-propelled mining vehicle, it is imperative to develop and validate the dynamic model of a tracked vehicle traveling on soft deep seabed. The purpose of this paper is to evaluate the fidelity of the dynamic simulation model by means of response surface methodology. Various statistical techniques related to response surface methodology, such as outlier analysis, detection of interaction effect, analysis of variance, inference of the significance of design variables, and global sensitivity analysis, are examined. To obtain a plausible response surface model, maximum entropy sampling is adopted. From statistical analysis and prediction for dynamic responses of the tracked vehicle, conclusions will be drawn about the accuracy of the dynamic model and the performance of the response surface model.

• 한국해양공학회지
• /
• 제31권5호
• /
• pp.357-363
• /
• 2017

The sloshing pressure acting on a membrane-type LNG CCS is a typical irregular impact load, and the structural response of a tank system induced by sloshing also shows very complex behavior, including fluid structure interaction. Therefore, it is not easy to accurately estimate the sloshing impact pressures and resulting structural response. Moreover, a huge time consuming process to deal with the enormous pressure data obtained during a model tank test and the following structural analysis would be inevitable. To reduce the computation time for structural analysis, in this study, a rational structural modeling strategy was considered, and a simplified scheme to analyze the dynamic structural responses of an LNG CCS was introduced, which was based on the concept of the linear combination of the triangular response functions obtained by a transient response analysis of structures under unit triangular impact pressure. A structural analysis of a real Mark III membrane type insulation system under the sloshing impact pressure time histories obtained by model tests was performed using the various proposed structural models and simplified analysis scheme. The results were investigated in detail, including the elastic support effects of the hull structure.

• 한국해양공학회지
• /
• 제29권5호
• /
• pp.342-350
• /
• 2015

A seismic reliability analysis of the jacket-type support structure for an offshore wind turbine was performed. When defining the limit state function using the dynamic response of the support structure, numerous dynamic calculations should be performedin an approach like the FORM (first-order reliability method). This causes a substantial increase in the analysis cost. Therefore, in this paper, a new reliability analysis approach using the static response is used. The dynamic effect of the response is considered by introducing a new parameter called the peak response factor (PRF). The probability distribution of the PRF could be estimated using the peak value of the dynamic response. The probability distribution of the PRF was obtained for a set of ground motions. A numerical example is considered to compare the proposed approach with the conventional static-response-based approach.

• 한국해안·해양공학회논문집
• /
• 제26권1호
• /
• pp.33-40
• /
• 2014

극한 해양 환경하중을 고려한 해상풍력터빈 지지구조물에 대한 신뢰성 해석을 수행하였다. 신뢰성 해석을 위한 한계상태함수는 mud-line에서 지지구조물의 동적응답으로 정의되며, 동적응답은 정적응답과 동적응답계수의 곱으로 정의된다. 동적응답계수는 설계조건에서의 동적 시간이력응답을 분석하여 구할 수 있다. 허브(Hub) 위치에 작용하는 추력은 GH_Bladed를 사용하여 계산하였으며, 정적하중으로 적용하였다. 동적응답계수는 대수정규분포, 지반물성 중 내부마찰각은 상한과 하한이 결정된 베타분포이며, 그 외 설계변수는 정규분포 확률변수로 취급되었다. mud-line 에서의 동적응답을 통해 정의된 한계상태함수에 따라 일계신뢰도법(First order reliability method, FORM)을 사용하여 해상풍력터빈 지지구조물의 신뢰도지수를 산정하였다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.139-139
• /
• 2017

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.140-140
• /
• 2017

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.141-141
• /
• 2017

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.114-121
• /
• 2009

In this study, acceleration responses of caisson structures under various environmental conditions are experimentally examined as a basic study to develop the health assessment technique for harbor structures. To achieve the objective, three approaches are implemented. Firstly, a target caisson structure is selected and its small-scaled caisson is constructed in the laboratory. Secondly, a finite element model of the caisson is generated to identify dynamic responses of the baseline structure. Thirdly, experimental tests are performed on the caisson model to examine dynamic responses under various boundary conditions and impact locations. Four different boundary conditions, 'standing on concrete floor', 'standing on styrofoam block', 'standing on sand-mat' and 'hanging by crane', are considered and correlation coefficients of frequency response functions between four states are analyzed.

• 한국해양공학회지
• /
• 제29권5호
• /
• pp.351-358
• /
• 2015

This paper presents an effective damage detection method using a meta model. A meta model is an approximation model that uses the relations between the design and response variables. It eliminates the need for repetitive analyses of computationally expensive models during the optimization process. In this study, a response surface model was employed as the meta model. The surface model was estimated using the correlation of the stiffness and natural frequencies of the structures. The locations and values of the damages were identified using a meta model-based damage detection method. Two numerical examples (a cantilever beam and jacket structure) were considered to verify the performance of the proposed method. As a result, the damages to the structures were accurately detected.