• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1344-1349
• /
• 2012

The Korean DGPS station transmits the 200 bps GPS enhancement signal using the MSK modulation in frequency range of 283.5 kHz to 325 kHz. The land-based stations of 6 sites provide the service area of 80 km with the output power of 500 W. The ocean-based stations of 11 sites provide the output power of 300 W, which provide the DGPS service to 185 kM. Some places are serviced from two or three DGPS stations. The interferences among the DGPS stations using the high power can be occurred. Also, the performances of the user terminasl in dual service area can be degraded. In this paper, the protection ratios for the DGPS service are defined. Using the MF wave propagation model, the interferences among the DGPS stations and the adjacent wireless ground stations are analyzed. Also, the performances of DGPS user terminals are analyzed in the viewpoint of interference.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2016

This paper presents the new position estimation method which contains the optical displacement sensor and the dead reckoning based position estimation algorithm for automation of hull cleaning robot. To evaluate feasibility of the proposed position estimation method on the hull cleaning robot, it was applied on the small scale robot model which has an identical drive method with the hull cleaning robot and then a set of the position estimation experiments were performed. The experimental results of the position estimation demonstrate that the estimated results with the optical displacement sensors is more accurate than used rotary encoder method. In addition, it continuously calculated the robot position quite close to the real robot driving path. In a follow-up study, the proposed position estimation method will be complemented and exploited on the actual hull cleaning robot by adding additional sensor modules that correct measurement errors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1761-1768
• /
• 2013

Digital shipbuilding is a technology to reduce the total cost and lead time inevitably made by reschedule and rework in a shipyard. Strategic planning should be undertaken in order to have an effect on the applicable field. We aim at planning a strategy of digital shipbuilding technology by analysis of production planning workflow in this paper. In the basis of BPR methodology, the as-is business process is analyzed to build an workflow model, and derive the bottleneck business process. We dig into the inside details of the process to illustrate an diagram of the core improvement opportunities, and perform process simulation not only to create the application scenarios but also to expect the main effects. The application strategy will make a basic sketch to save both the production cost and time for high quality products in the shipyards.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.949-955
• /
• 2018

Hardware-in-the-loop (HIL) simulation is a technique that can be employed for developing and testing complex real-time embedded systems. HIL simulation provides an effective platform for verifying power management system (PMS) performance of liquefied natural gas carriers, which are high value-added vessels such as offshore plants. However, HIL tests conducted by research institutes, including domestic shipyards, can be protracted. To address the said issue, this study proposes a field programmable gate array (FPGA) based PMS-HIL simulator that comprises a power supply, consumer, control console, and main switchboard. The proposed HIL simulation platform incorporated actual equipment data while conducting load sharing PMS tests. The proposed system was verified through symmetric, asymmetric, and fixed load sharing tests. The proposed system can thus potentially replace the standard factory acceptance tests. Furthermore, the proposed simulator can be helpful in developing additional systems for vessel automation and autonomous operation, including the development of energy management systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1907-1917
• /
• 2010

It is much needed research for ocean scientists to implement a digitizing system that effectively extracts and digitializes sea level records accumulated from the past. The main difficulty of such a system is huge anount of data to be processed. In this paper, we implement a digitizing system to handle such mass-data of sea level records. This system consists of a pre-process step, a digitizing step and a post-process step. In pre-process step, the system adjusts skewnesses of scanned images and normalizes the size of images automatically. Then, it extracts a graph area from images and thins the graph area in digitizing step. Finally, in the post-process step, the system tests the reliability. It is cost-effective and labour-reducing software for scientists not wasting their time to such boring manual digitizing jobs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2103-2123
• /
• 2018

Ships built today are larger in scale and feature more complex structures. The ever-evolving systems used on board a ship require vast amounts of data processing. In the future, with the advent of smart ships, unmanned ships and other next-generation ships, the volumes of data to be processed will continue to increase. Yet, to date, ship data has been processed using wired networks. Placed at fixed locations, the nodes on wired networks often fail to process data from mobile devices. Despite many attempts made to use Wi-Fi on ships just as on land to create wireless networks, Wi-Fi has hardly been available due to the complex metal structures of ships. Therefore, Wi-Fi on ships has been patchy as the ship-wide total Wi-Fi coverage has not properly implemented. A new ship-wide wireless network environment is part of the technology conducive to the shipbuilding industry. The wireless network environment should not only serve the purpose of communication but also be able to manage and control multiple features in real-time: fault diagnostics, tracking, accident prevention and safety management. To better understand the characteristics of wireless frequencies for ships, this paper tests the widely used TETRA, UHF and Wi-Fi and sheds light on the features, advantages and disadvantages of each technology in ship settings. The proposed deployment of a Super Wi-Fi network leveraging the legacy UHF system of TMS generates a ship-wide wireless network environment. The experimental findings corroborate the feasibility of the proposed ship-wide Super Wi-Fi network environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1835-1844
• /
• 2007

Recently there have been some positive evidences on the effects of learning in a virtual environment. However, most of these educational VR systems were not deeply considered in the design of drawing a learner's attention on lesson contents, which would help enhance retained memory. Hence, a study was conducted to measure 17 subjects' attention states using EEC, ECG, GSR, and eye-tracking and their behaviors while they were given guided search task or exploration task in a virtual environment consisting of five major events. It also analyzed the subject's remembered items after their VR experiences using a surrey. This paper Int describes an overview of the ocean virtual environment used in this study, and it then explains the experimental design, apparatus, and method. It will also discuss the results by a detail analysis (in a whole VR session as well as event-related 10-second 33 sub-sessions) with the subjects' attention states and their retained memory after the learning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.1011-1017
• /
• 2019

This paper proposes reinforcement learning to solve the node-disjoint path problem which establishes multipath for reliable data transmission in wireless ad-hoc networks. The node-disjoint path problem is a problem of determining a plurality of paths so that the intermediate nodes do not overlap between the source and the destination. In this paper, we propose an optimization method considering transmission distance in a large-scale wireless ad-hoc network using Q-learning in reinforcement learning, one of machine learning. Especially, in order to solve the node-disjoint path problem in a large-scale wireless ad-hoc network, a large amount of computation is required, but the proposed reinforcement learning efficiently obtains appropriate results by learning the path. The performance of the proposed reinforcement learning is evaluated from the viewpoint of transmission distance to establish two node-disjoint paths. From the evaluation results, it showed better performance in the transmission distance compared with the conventional simulated annealing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.596-603
• /
• 2019

A reprogramming operation is necessary to update the software code of the node to change or update the functionality of the deployed node in wireless sensor networks. This paper proposes an optimization algorithm that minimizes the transmission energy of a node for the purpose of reprogramming a node in wireless sensor networks. We also design an algorithm that keeps energy consumption of all nodes balanced in order to maintain the lifetime of the network. In this paper, we propose a Tabu search algorithm with a new neighborhood generation method for minimizing transmission energy and energy consumption in wireless sensor networks with many nodes. The proposed algorithm is designed to obtain optimal results within a reasonable execution time. The performance of the proposed Tabu search algorithm was evaluated in terms of the node's transmission energy, remaining energy, and algorithm execution time. The performance evaluation results showed better performance than the previous methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.778-785
• /
• 2020

Wireless mesh networks consist of mesh clients, mesh routers and mesh access points. The mesh router connects wireless network services to the mesh client, and the mesh access point connects to the backbone network using a wired link and provides Internet access to the mesh client. In this paper, a limited number of mesh routers and mesh access points are used to propose optimization algorithms for network design for wireless mesh networks. The optimization algorithm in this paper has been applied with a sub-subscription algorithm, which is one of the meta-heuristic methods, and is designed to minimize the transmission delay for the placement of mesh routers and mesh access points, and produce optimal results within a reasonable time. The proposed algorithm was evaluated in terms of transmission delay and time to perform the algorithm for the placement of mesh routers and mesh access points, and the performance evaluation results showed superior performance compared to the previous meta-heuristic methods.