• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2017

Objectives: This study aims to suggest definitions in accordance with the purpose of the permissible limit system in order to suggest criteria for substances with permissible exposure limits and expanded candidate substances under the Occupational Safety and Health Act in Korea. Methods: The occupational safety and health related acts from six countries were researched, including from Korea. To understand the health hazards of substances with permissible exposure limits, health hazards were prioritized for 211 substances through working environment measurement on the basis of KOSHA's preceding research. Results: To suggest criteria for substances with permissible exposure limits and expanded candidate substances, definitions were suggested in accordance with the purpose of the permissible limit system. Based on the health hazard priorities for the working environment, selection criteria were identified. Conclusions: Three suggestions for substances with permissible exposure limits were proposed including substances where occurred serious health hazards such as carcinogenicity, germ cell mutagenicity, and reproductive toxicity to workers.

• Environmental Mutagens and Carcinogens
• /
• v.21 no.1
• /
• pp.57-62
• /
• 2001

Bacterial reverse mutation assays were performed for 20 workplace chemicals in Korea, which were selected among workplace chemicals under the Korea Industrial Safety and Health Act (KISHA) with the occupational exposure levels (OELs). The assays were carried out by using the pre-incubation method ($37 ^{\circ}C$, 20 min) with and without metabolic activation using Salmonella typhimurium TA98, TA100, TA1535, TA1537 and E. coli WP2uvrA. The chemicals were tested at 5 concentrations both in the preliminary and the second assays. Despite the cell toxicities, there were no chemical-induced mutagenicities with or without metabolic activation in any of 20 chemicals.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.44-50
• /
• 2022

This study examines the relationship between safety factors and health management systems based on accident statistics in the construction industry stipulated in the Serious Disaster Punishment Act. To determine the level of safety achieved by companies through their health management system, the top 1000 construction firms in the country were surveyed online. Four hundred sixty companies responded to the survey by providing their statistics on major accidents (mortality, accidental mortality, and injury rates). Statistical tests showed that companies with a team dedicated to the oversight of safety and health management had fewer accidents than those without one. Factor and regression analyses revealed that three factors affected the mortality and accident rates: safety and health plan, safety and health professionals, and safety and health activities. Moreover, two factors significantly influenced the injury rate: safety management supported by a cooperative company and implementation of on-site safety and health activities. The findings of this study can be used as a fundamental reference for further research and consultation on the formulation of safety and health management systems for construction companies.

• Safety and Health at Work
• /
• v.12 no.1
• /
• pp.136-138
• /
• 2021

Coronavirus disease 2019 (COVID-19), which is a newly emerging infectious disease worldwide, can be categorized as an occupational disease, because employees, particularly in the healthcare system, can be infected at the workplace. As of December 15, 2020, we summarized the occupational safety and health practices in selected countries on the recognition of COVID-19 as one of the occupational risks. The situation has differed among countries, including the recognition status and whether a specific regulation existed. International organizations, namely the International Labour Organization, World Health Organization, and European Union, should plan and conduct studies on the work-relatedness of COVID-19, propose criteria for recognition, and add the infection to the occupational disease list to provide a basis for specific country regulations. Stakeholders should also act to adjust country-level legislation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.393-401
• /
• 2022

Objectives: OHSMS, which was introduced by Serious Accident Punishment Act as a means for safety and health management at work place, but it is not effective according to recent statistical data. Therefore, I intend to compare the OHSMS regulations of SAPA based on ISO 45001, the international standard of OHSMS, and examine the differences and problems. Methods: The OHSMS regulation of Serious Accident Punishment Act was compared and analyzed using the content standard of ISO 45001, the international standard of OHSMS. The construction and operation aspects and differences in key concept definitions of OHSMS were analyzed in depth. Results: ISO 45001 aims to provide OHSMS with an autonomous framework to manage risks and opportunities in safety and health management, whereas Serious Accident Punishment Act aims for safety and health management through an interest and effort in safety and health management on the premise of legal responsibilities of corporations and CEO. As a result, comparing to ISO 45001 in construction and operation aspects and differences in key concept definitions of OHSMS, the OHSMS of Serious Accident Punishment Act do not cover the entire business in concept definition and construction. Conclusions: In order for Serious Accident Punishment Act to achieve its original purpose of preventing serious accidents through systemic safety and health management, it is necessary to correctly understand the contents of ISO 45001 and to revise the OHSMS regulations in a direction that can ensure predictability and feasibility.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.175-183
• /
• 2012

Objectives: This study developed a harmonized method for risk assessment based on the Hazard & Risk Evaluation of Chemicals (HREC) according to the Industrial Safety and Health Act (ISHA). Methods: Three preliminary studies, performed during 2010 and 2011 by the Occupational Safety and Health Research Institute and three academic research groups, were compared. The differences in risk assessment, especially in the dose-response assessment method, were analyzed. A new harmonized method for dose-response assessment was suggested and its applicability for the HREC was examined. Results: Considering the various steps of each dose-response assessment, the equivalent steps in quantitative correction, uncertainty factor 2 (UF2) for intra-species uncertainty, and UF3 for the experimental period in the uncertainty correction were relatively high. Using our new method, the total correction values (quantitative correction plus uncertainty correction) ranged from 72~15,789 to 30~60, and the ratio of the threshold limit value (TLV) to the reference concentration decreased from 12.8~1900 to 5.4~11.8. Furthermore, when we performed risk characterization by our new method, hazard quotient (HQ) values for chloroethylene, epichlorohydrin, and barium sulfate became 3.0, 14.1, and 1.13 respectively, whereas three previous studies reported HQ values of 7.1, 4580, and 87.3 considering reasonable maximum exposure (RME) conditions. HQs of the three chemicals were calculated to be 0.6, 2.4, and 0.1 respectively, when compared to their TLVs. Conclusions: Our new method could be applicable for the HREC because the total correction values and the ratio of TLVs were within reasonable ranges. It is also recommended that additional risk management measures be applied for epichlorohydrin, for which the HQ values were greater than 1 when compared with both reference values and the TLV. Our proposed method could be used to harmonize dose-response assessment methods for the implementation of risk assessment based on the HREC according to ISHA.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.318-321
• /
• 2017

This commentary presents the regulatory backgrounds and development of the national proficiency testing (PT) scheme on asbestos analysis in the Republic of Korea. Since 2009, under the amended Occupational Safety and Health Act, the survey of asbestos in buildings and clearance test of asbestos removal works have been mandated to be carried out by the laboratories designated by the Ministry of Employment and Labor (MOEL) in the Republic of Korea. To assess the performance of asbestos laboratories, a PT scheme on asbestos analysis was launched by the Korea Occupational Safety and Health Agency (KOSHA) on behalf of the MOEL in 2007. Participating laboratories are evaluated once a year for fiber counting and bulk asbestos analysis by phase contrast microscopy and polarized light microscopy, respectively. Currently, the number of laboratory enrollments is > 200, and the percentage of passed laboratories is > 90. The current status and several significant changes in operation, sample preparations, and statistics of assigning the reference values of the KOSHA PT scheme on asbestos analysis are presented. Critical retrospect based on the experiences of operating the KOSHA PT scheme suggests considerations for developing a new national PT scheme for asbestos analysis.

• Journal of the Korean Society of Safety
• /
• v.38 no.6
• /
• pp.36-49
• /
• 2023

Since the recently established obligation to implement safety and health measures for specialized workers as outlined in the Occupational Safety and Health Act (OSHA) for nine occupations in January 2020 and five occupations in November 2021, there is a need to verify and inspect the on-site operation of related systems. After a comprehensive fact-finding survey and risk factor analysis, it is necessary to examine the responsibility for on-site safety and preventive measures, along with the roles and responsibilities of specialized workers. Stakeholder analysis is essential to identify the fundamental problems related to the responsibility stipulated in the purpose of OSHA and to explore the entity responsible for implementing safety measures. Therefore, in this paper, we discuss the topic of implementation based on legal standards for on-site safety and preventive measures. Additionally, we develop a role model for appropriate safety measures, outlining the dynamic relationship between those who provide labor and those who provide labor in the context of specialized workers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.277-281
• /
• 2005

Air-line mask is an important personal protective equipment for workers working under hazardous surroundings in which a fixed ventilation system is difficult to be installed. If the air-line mask make loud noise, works wearing the mask may be faced with health problems such as noise induced hearing loss(NIHL). The purpose of this study is to introduce a low noisy technology for workers using air-line mask. A traditional type air-line has been improved to an advanced air-line mask with lesser noise. In the mask, air suppling conduits consists of multi tubes are placed inside of the front of the safety helmet. The noise level reduced from 80dB(A) to less than 80dB(A) when measured by KS A 0701 method at Center for Safety Inspection, Testing and Certification for KOSHA. It is suitable for related regulation[Article 35 of the Industrial Safety and Health Act(Test of Personal Protective Equipment)]. While workers working in noise level of over 90dB(A), they may expose to 82dB(A) or less when they wear the advanced masks. This type masks can be an alternative for works suffering from loud noise generated by traditional air-line masks.

• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.8-16
• /
• 2020

In Article 311 of the Regulation on Occupational Safety and Health Standards requires the use of Korean Industrial Standards Act in accordance with the Industrial Standardization Act. However, the classification, inspection, maintenance, design, selection, and installation of explosion hazard locations for explosion and explosion prevention and internalization of 'safety' in the performance maintenance phase of electrical machinery and equipment There is no technical and institutional management plan for remodeling and alteration. Analysis of actual conditions and problems related to the installation, use, and maintenance of explosion-proof equipment, comparative analysis of domestic and international technical standards and systems, technical, institutional and administrative systems and systems related to installation, use, and maintenance of explosion-proof equipment, technical personnel and qualifications, etc. It is to propose legislation, system improvement, and technical standard establishment related to the maintenance of explosion-proof facility performance through improvement of the necessity and feasibility study for establishment of the legal status of the management site and management plan. As technical measures, KS standard revision (draft), KOSHA guide (draft) and explosion-proof facility performance maintenance manual were presented. In addition, the institutional management plan proposed the revised rule on occupational safety and health standards, the revised rule on the restriction of employment of hazardous work, and the manpower training program related to the maintenance of explosion-proof facilities and the qualification plan. Enhance safety at the installation, use, and maintenance stage of explosion-proof structured electrical machinery. It is expected to be used to classify explosion hazards, select related equipment, and to update and standardize standards related to installation, use and maintenance.