• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제25권1호
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제31권2호
• /
• pp.147-155
• /
• 2021

Objective: The purpose of this study was to find ways for strengthening occupational health services through monitoring exposure to health hazards. Methods: About 70,000 workplaces that have conducted the work environment measurement(WEM) over the last three years(2017~2019) were classified according to the Korean Standard Industry Classification(KSIC), and the current status of WEM by industry was analyzed. The authors considered ways to monitor exposure to health hazards in order to strengthen occupational health services and protect workers' health. Results: Based on the KSIC, 934 of the 1,196 total sub-classified industries have conducted WEM in at least one workplace over the last three year(2017~2019). In the case of manufacturing, out of a total of 477 sub-classified industries, 474 have conducted WEM at more than one workplace. However, in some industries, WEM was not conducted or the implementation rate was low, so it was necessary to examine whether WEM should be expanded based on a detailed analysis of the WEM database. To this end, it is necessary to form an exposure monitoring committee in which various experts from different fields can participate. The committee needs to discuss the overall matters necessary for selecting industries that require detailed investigation or research, review the results, and prepare a final recommendation. Conclusion: In conclusion, the government needs to come up with a plan to strengthen occupational health services through surveys and research on the current status of WEM and work environment management models by industry.

• Annals of Occupational and Environmental Medicine
• /
• 제34권
• /
• pp.16.1-16.11
• /
• 2022

Background: Antimony is used in catalysts, pesticides, brake systems, pharmaceuticals, and synthetic fire retardants in the plastic, paint, and rubber industries. Accumulation of trivalent antimony compounds in the body can cause cardiotoxic effects and increase the risk of electrocardiogram (ECG) abnormalities and sudden death. Antimony exposure can result in action potential prolongation, causing a cardiac repolarization delay, which appears as QTc prolongation and T-wave abnormalities on the ECG. There are no studies on antimony-associated cardiac toxicity in Korea. Case presentation: Accordingly, the present study reports cases of ECG abnormalities in workers handling antimony trisulfide at a company located in the Gyeongsangbuk-do region. Nineteen workers employed at an automobile brake lining manufacturer were exposed to antimony trisulfide dust through thermoforming, grinding, and drilling processes. In 2020, the workers were reported to work 12-hour shifts, 5 days a week. The time-weighted average (TWA) of antimony trisulfide exposure measured in workers was 0.0028 mg/m³. Two workers were excluded from the analysis due to pre-existing medical conditions (cardiovascular disease). Of the remaining 17 workers, ECG abnormalities were found in 41% (seven out of 17: four with QTc prolongation and T-wave abnormalities; two with only T-wave abnormalities; and one with only QTc prolongation). Conclusions: This case report outlines the first few cases in Korea in which potential cardiac toxicity caused by occupational exposure to antimony was identified. However, data regarding cardiac toxicity caused by antimony exposure are still lacking in Korea; thus, additional studies are needed to identify causal relationships.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제25권4호
• /
• pp.525-533
• /
• 2015

Objectives: Alongside smoking, occupational exposure is an important risk factor for chronic obstructive pulmonary disease. The purpose of this study was to evaluate factors associated with occupational pulmonary function decline that can be used to create guidelines for the health management of shipyard workers Materials: This study analyzed spirometry from 10,597 male shipbuilding workers. Functional decline in spirometry was defined as FEV1/FVC <70% and logistic regression for work duration and occupational hazard exposure was performed Results: Among the subjects, 4.2% showed an obstructive pattern in pulmonary function. The odds ratios for hazard exposure were 1.67(indirect) and 3.54(direct), and for work duration 1.97(10-18 years), 2.29(19-27), and 5.02(28+). After adjusting for smoking and work-related factors, the odds ratios for work durations of over 10 years were 1.73(10-18 years), 1.99(19-27), and 4.09(28+), but for hazards exposure was 1.71(direct) alone after adjustment. Conclusions: Occupational COPD is insidious and chronic, and thus long-term hazard exposed(especially over 10 years) shipyard workers with functional decline in spirometry need to prevent and manage COPD. This study is important for establishing guidelines to manage hazard exposure among shipyard workers and prevent COPD.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제28권1호
• /
• pp.80-90
• /
• 2018

Objectives: This study was performed to propose a domestic occupational exposure limit(OEL) following a health hazard assessment, calculation of a non-carcinogenicity reference concentration worker($RfC_{worker}$) value, and examination of international agencies' exposure limits. It also recommends legal management within the Occupational Safety and Health Act for HCFC-123, which caused an acute hepatotoxicity incident. Methods: An acute hepatotoxicity incident due to the fire extinguishing agent HCFC-123 was investigated. Toxicological hazard and health hazard classifications were examined and a non-carcinogenicity $RfC_{worker}$ value was calculated for HCFC-123. An OEL and the necessity of legal management were recommended as well. Results and Conclusions: An OEL for HCFC-123 of 10 ppm($62.5mg/m^3$), which considered the $RfC_{worker}$ value, 5.56 ppm, produced in dose-response assessment and the exposure level of 19.1-20.9 ppm measured as an eight-hour TWA(time-weighted average) in the incident place, is recommended. HCFC-123 is urged to be included as a chemical requiring legal management in the Occupational Safety and Health Regulations. In addition, it is recommended that a peak exposure of ACGIH be adopted in the Notice of the Ministry of Employment and Labor.

• Safety and Health at Work
• /
• 제14권3호
• /
• pp.325-331
• /
• 2023

Background: Heat stress is a harmful physical hazard in many occupational settings. However, consequences of occupational heat exposure among workers in a sugarcane factory in Ethiopia are not well characterized. This study aimed to assess the level of occupational heat exposure-related symptoms and contributing factors. Methods: In this cross-sectional study, five workstations were selected for temperature measurement. Heat stress levels were measured using a wet-bulb globe temperature index meter. A stratified random sampling technique was used to select 1,524 participants. Heat-related symptoms were assessed using validated questionnaires. Results: The level of occupational heat exposure was 72.4% (95% CI: 70.2%-74.8%), while 71.6% (95% CI: 69.3%-74.9%) of participants experienced at least one symptom related to heat stress. The most common heat-related symptoms were swelling of hands and feet (78%), severe thirst (77.8%) and dry mouth (77.4%). The identified risk factors were a lack of reflective shields (AOR: 2.20, 95% CI: 1.53, 3.17), not-enclosed extreme heat sources (AOR: 1.76, 95% CI: 1.23, 2.51), a lack of access to shade (AOR: 9.62, 95% CI: 6.20, 14.92), and inappropriate protective clothing provision (AOR: 1.58, 95% CI: 1.27, 2.71). Conclusions: The burden of occupational heat exposure and heat-induced symptoms was high. Lack of reflective shields, the absence of enclosed extreme heat sources, a lack of access to shade, and inappropriate protective clothing provision were considerable attributes of heat stress. Therefore, the use of mechanical solutions to stop heat emissions at their sources and the key factors identified were areas for future intervention.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제31권3호
• /
• pp.213-225
• /
• 2021

Objectives: This study identifies the trends in possible and probable occupational disease among chromium workers and reviews the literature on domestic and foreign chromium workers to review the industries, biological exposure levels, and major results. Methods: The results of the Ministry of Employment and Labor's special health-screening program for hazard agents among workers from 2009 to 2019 were used. Also, the industries, biological exposure levels, and major results on chromium workers were reviewed using PubMed and RISS. Results: The average annual proportion of both possible and probable occupational disease for chromium workers has recently increased. The average annual proportion of possible and probable occupational disease that can occur was high for both men and women in their 60s or older by age and 10 to 14 years by work duration. By industry, possible occupational disease showed high in manufacturing. In the literature review, many electroplating-related chromium-workers reported high levels of exposure to blood and urine chromium, as did dental technicians; tannery, tile factory or glass mill workers; cement workers; and sodium bichromate workers. Furthermore, a number of main findings in recent studies have reported that chromium exposure is related to genetic toxicity among workers. Conclusions: In this study, the average annual rate of both possible and probable occupational disease in domestic chromium workers is increasing, and a body of literature shows that chromium exposure is related to genetic toxicity and associated indicators among workers, which requires more systematic study.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 한국독성학회 2003년도 추계학술대회
• /
• pp.68-83
• /
• 2003

Welders working in a confined space, like in the shipbuilding industry, are at risk of being exposed to high concentrations of welding fumes and developing pneumoconiosis or other welding-fume exposure related diseases. Among such diseases, manganism resulting from welding-fume exposure remains a controversial issue, as the movement of manganese into specific brain regions has not been clearly established.(omitted)

• Proceedings of the PSK Conference
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-1
• /
• pp.72-72
• /
• 2003

Welders working in a the confined space, like in the shipbuilding industry, are have at risk of being exposed toing a high concentrations of welding fumes and of developing pneumoconiosis or other welding- fume exposure related diseases. Among such diseasesthem, manganism resulting fromcaused by welding- fume exposure remains ais still controversial issue, as the movement ofnd no clear demonstration of manganese movement into the specific brain regions has not been clearly established. (omitted)

• Safety and Health at Work
• /
• 제2권1호
• /
• pp.1-8
• /
• 2011

The knowledge on the etiology of breast cancer has advanced substantially in recent years, and several etiological factors are now firmly established. However, very few new discoveries have been made in relation to occupational risk factors. The International Agency for Research on Cancer has evaluated over 900 different exposures or agents to-date to determine whether they are carcinogenic to humans. These evaluations are published as a series of Monographs (www.iarc.fr). For breast cancer the following substances have been classified as "carcinogenic to humans" (Group 1): alcoholic beverages, exposure to diethylstilbestrol, estrogen-progestogen contraceptives, estrogen-progestogen hormone replacement therapy and exposure to X-radiation and gamma-radiation (in special populations such as atomic bomb survivors, medical patients, and in-utero exposure). Ethylene oxide is also classified as a Group 1 carcinogen, although the evidence for carcinogenicity in epidemiologic studies, and specifically for the human breast, is limited. The classification "probably carcinogenic to humans" (Group 2A) includes estrogen hormone replacement therapy, tobacco smoking, and shift work involving circadian disruption, including work as a flight attendant. If the association between shift work and breast cancer, the most common female cancer, is confirmed, shift work could become the leading cause of occupational cancer in women.