• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.1
• /
• pp.42-51
• /
• 2012

Objectives: To compare the exposure level of extremely low frequency (ELF) magnetic fields among semiconductor workers, shipyard welders and office workers. Methods: To measure the ELF magnetic field concentration, EMDEX LITE (Enertech, USA) were used and monitored for eight hours continuously. Five companies handling the electric and magnetic field (EMF) source were investigated, which the exposure groups were classified into three groups: semiconductor workers, welders, and office workers. Welder group was chosen as a high exposed group and office group as a low exposed group. Results: The arithmetic mean (${\pm}SD$) and geometric mean (GSD) of personal exposure level of semiconductor workers were 0.73 (${\pm}1.33$) ${\mu}T$, 0.43 (2.88) ${\mu}T$, respectively. The ceiling value ranged between 0.18 and 123.2 ${\mu}T$. Welders were exposed high with the arithmetic mean value of 3.46 (${\pm}\;13.46$) ${\mu}T$ and geometric mean value of 0.45 (4.70) ${\mu}T$, respectively, and ceiling value range of 75.5~129.6 ${\mu}T$. The exposure levels of office workers were low compared to other exposed groups; the arithmetic mean 0.05 (${\pm}0.13$) ${\mu}T$, geometric mean 0.03 (2.38) ${\mu}T$ and ceiling value range 0.37~3.35 ${\mu}T$. This study revealed statistically significant differences of the mean ELF magnetic field exposure doses among three groups (p < 0.01). Conclusions: The average ELF magnetic field exposure doses of semiconductor workers were much higher than those of office workers in control group, but were lower than those of welders in high exposure group.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.87-96
• /
• 2011

In 1967, the problem of occupational lead exposure came to public attention in Korea. Since then, regular progress has been made in lowering workplace lead exposures, instituting new workplace controls, and implementing health examinations of exposed workers. Past serious lead poisoning episodes made it possible to introduce biological monitoring programs on a voluntary basis in high-lead-exposure facilities in Korea. Industry-specific occupational health services for lead workers in Korea during the last 22 years can be categorized into three phases. During the first phase (1988-1993), efforts were directed at increasing awareness among workers about the hazards of lead exposure, biological monitoring of blood zinc protoporphyrin began, and a respiratory protection program was introduced. During the second phase (1994-1997), a computerized health management system for lead workers was developed, blood-lead measurement was added to biologic monitoring, and engineering controls were introduced in the workplace to lower air-lead levels to comply with air-lead regulations. Finally, during the third phase (1998-present), a new biomarker, bone-lead measurement by X-ray fluorescence, was introduced. Bone-lead measurement proved to be useful for assessing body burden and to demonstrate past lead exposure in retired workers. Occupational health service practice for lead workers, including the industry-specific group occupational health system, has brought considerable success in the prevention of lead poisoning and in reducing the lead burden in Korean lead workers during the last several decades. The successful achievement of prevention of lead poisoning in Korea was a result of the combined efforts of lead workers, employers, relevant government agencies, and academic institutes.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.940-948
• /
• 2012

In Korea, researches on the exposure assessment of the hand-transmitted vibration started from the mid-90, however, they were performed in the limited industries such as auto-assembly plants and the evaluation of the vibration was mostly conducted by ISO 5349(1986). Therefore, it was necessary to assess hand-transmitted vibration levels of workplace such as ship building/repairing industry or mining industry where occupational injuries are largely occurred and to evaluate the vibration levels using revised ISO 5349(2001). The SVAN 948 Four Channels Sound & Vibration Analyser was used for the measurement. The workers using a chain saw were exposed to 1.7~2.8 $m/s^2$ of daily vibration level. Workers using a rock drill in a coal mining were exposed to the highest vibration acceleration among workers and the levels were 7.1~10.8 $m/s^2$. Vibration levels of grinders were different according to the types of grinders. The hand-transmitted vibration of 3 types of grinders were measured and the levels were 3.3~11.1 $m/s^2$. Workers using a impact wrench were exposed to 1.5~1.6 $m/s^2$ of vibration. Out of 20 kinds of machines, only 4 tools provided the information of vibration acceleration on the instructions. In addition, the current condition of workplace to control vibration was not much different from the past because there are no vibration exposure limit.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.4
• /
• pp.227-235
• /
• 2011

The objective of this study was to analyze 157 processes of 145 industries that exceeded Korean Occupational Exposure Limits (KOEL) for carcinogen during the 11 year period from 1999 to 2009. The data included number of industry and workers exposed, type of carcinogen and their exceeded ratio, type and size of industry in each year. These data were collected by 46 regional employment & labor offices in Korea using work environment monitoring reports. The result showed that, in each year, about 10 industries exceed their carcinogen exposure limit. The most common carcinogen exceeding KOEL were found to be formaldehyde, benzene, ethylene oxide and chromium VI. The carcinogen with the highest level of over-exposure were in the order of formaldehyde, benzene, ethylene oxide and asbestos. Fabricated metal product manufacturing industry were found to be most vulnerable against carcinogen with 11.1% of them exceeding carcinogen KOEL followed by electronic components manufacturing industry (8.3%), chemical products manufacturing industry (6.3%), and electrical equipments manufacturing industry (4.9%). The industry employing less than 50 workers had the highest percentage of exceeding carcinogen KOEL with 52.8%. The result also showed that strengthening KOEL for benzene and asbestos helped reduce the level of carcinogen over-exposure. Based on these results, strengthening the KOEL or new regulation turned out to help reduce the carcinogen over-exposure level. Benzene, ethylene oxide and chromium VI were the most frequently over-exposed carcinogen with the highest level. Therefore, these chemicals need to be regulated with a highest priority to improve the workplace environment. The results also show that the small-sized industries employing less than 50 workers was the most vulnerable against carcinogen exposures. Therefore, more government support are needed for these small-sized industries to help them to improve their workplace environment.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.220-225
• /
• 2017

Background: Benzene is a known occupational and environmental pollutant. Its urinary metabolite trans, trans-muconic acid (tt-MA) has been introduced by some environmental and occupational health regulatory associations as a biological index for the assessment of benzene exposure; however, recently, doubts have been raised about the specificity of tt-MA for low-level benzene exposures. In the present study, we investigated the association between urinary levels of tt-MA and inhalational exposure to benzene in different exposure groups. Methods: Benzene exposure was assessed by personal air sampling. Collected benzene on charcoal tube was extracted by carbon disulfide and determined by a gas chromatograph (gas chromatography with a flame ionization detector). Urinary tt-MA was extracted by a strong anion-exchange column and determined with high-performance liquid chromatography-UV. Results: Urinary levels of tt-MA in intensive benzene exposure groups (chemical workers and police officers) were significantly higher than other groups (urban and rural residents), but its levels in the last two groups with significant different exposure levels (mean = 0.081 ppm and 0.019 ppm, respectively) showed no significant difference (mean = $388{\mu}g/g$ creatinine and $282{\mu}g/g$, respectively; p < 0.05). Before work shift, urine samples of workers and police officers showed a high amount of tt-MA and its levels in rural residents' samples were not zero. Conclusion: Our results suggest that tt-MA may not be a reliable biomarker for monitoring low-level (below 0.5 ppm) benzene exposures.

• Toxicological Research
• /
• v.28 no.4
• /
• pp.269-277
• /
• 2012

The purpose of this study was to understand the mechanism of cardiovascular disease (CVD) caused by exposure to hazardous chemicals. We investigated changes in the symptoms of metabolic syndrome, which is strongly related to CVD, and in levels of other CVD risk factors, with a special emphasis on the roles of catecholamines and oxidative stress. The results revealed that neither body mass index (BMI) nor waist and hip circumferences were associated with exposure to hazardous chemicals. Among metabolic syndrome criteria, only HDL-cholesterol level increased on exposure to hazardous chemicals. Levels of epinephrine (EP) and norepinephrine (NEP) were not influenced by exposure to hazardous chemicals; however, the total antioxidative capacity (TAC) reduced because of increased oxidative stress. Both hazardous chemical exposure level and metabolite excretion were related to EP, NEP, and the oxidative stress index (OSI). Logistic regression analysis with these factors as independent variables and metabolic syndrome criteria as dependent variables revealed that EP was associated with blood pressure, and NEP with metabolic syndrome in the chemical-exposed group. In conclusion, the results suggest that reactive oxygen species generated and oxidative stress due to exposure to hazardous chemicals act as mediators and cause changes in the physiological levels of EP and NEP to increase blood pressure. This ultimately leads to the development of CVD through increase in cholesterol, triglyceride, and blood glucose levels by lipid peroxidation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.46-58
• /
• 2017

Objectives: Particulate matter (PM) at construction sites mostly originates from either construction activities or the atmospheric environment. This study was conducted to evaluate the exposure level to PM and the contribution ratio of atmosphere sources at construction sites. Methods: We reviewed literature and governmental systems related to PM exposure in occupational settings and summarized them. In the field evaluation, five construction sites and one golf course were selected: two from Gyeonggi-do Province and four from North Gyeongsang-do Province. For each site, personal samples from outdoor construction workers and area samples from the outdoor area around the construction site office were collected according to construction work types. PM concentrations reported from nearby National Ambient Air Monitoring Stations were recorded. Respirable dust concentrations, respirable silica concentrations, and several metal concentrations including Cd, Cr, Pb, and As were monitored over four months. In the end we suggested how to manage particulate matter exposure at construction sites. Results: There was little literature reporting on exposure levels of construction workers to PM. Respirable dust concentrations measured in Gyeonggi-do Province were higher than those measured in North Gyeongsang-do Province. The geometric means of respirable dust concentrations in personal samples and area samples were $37.89{\mu}g/m^3$ and $92.86{\mu}g/m^3$, respectively. The respirable dust concentrations were higher than the PM concentrations reported from nearby National Ambient Air Monitoring Station. The geometric means of respirable silica concentrations of personal samples and area samples were $1.3{\mu}g/m^3$ and $1.1{\mu}g/m^3$, respectively. All metal concentrations were lower than 10% of individual Korean occupational exposure limits. Conclusions: Assuming that personal samples consisted of ambient PM and dust originating from work activities and area samples only collected ambient PM, we concluded that the dust exposure of outdoor construction workers originated 40.8% from the atmosphere and 59.2% from construction activities. PM exposure at construction sites should be controlled by employers, as in the case of outdoor heat stress. The Korean government needs to consider setting an occupational exposure limit for respirable dust.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.150-155
• /
• 2016

Background: Shipbuilding involves intensive welding activities, and welders are exposed to a variety of metal fumes, including manganese, that may be associated with neurological impairments. This study aimed to characterize total and size-fractionated manganese exposure resulting from welding operations in shipbuilding work areas. Methods: In this study, we characterized manganese-containing particulates with an emphasis on total mass (n = 86, closed-face 37-mm cassette samplers) and particle size-selective mass concentrations (n = 86, 8-stage cascade impactor samplers), particle size distributions, and a comparison of exposure levels determined using personal cassette and impactor samplers. Results: Our results suggest that 67.4% of all samples were above the current American Conference of Governmental Industrial Hygienists manganese threshold limit value of $100{\mu}g/m^3$ as inhalable mass. Furthermore, most of the particles containing manganese in the welding process were of the size of respirable particulates, and 90.7% of all samples exceeded the American Conference of Governmental Industrial Hygienists threshold limit value of $20{\mu}g/m^3$ for respirable manganese. Conclusion: The concentrations measured with the two sampler types (cassette: total mass; impactor: inhalable mass) were significantly correlated (r = 0.964, p < 0.001), but the total concentration obtained using cassette samplers was lower than the inhalable concentration of impactor samplers.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2023

Background: Firefighting involves exposure of firefighters to risks related to this activity, serious injuries, and occupational diseases are recorded. There are other consequences such as thermal and emotional stress. This systematic review is proposed in order to analyze the risks and consequences faced by these workers and thus provide elements to improve safety management systems in institutions. Method: A descriptive observational study of systematic literature review on the risks and consequences of exposure to firefighters' activity was proposed, and the information was analyzed and described based on the available data and according to the variables determined. Results: The studies showed data on mechanical, physical, chemical, psychosocial risks, workers' perception and resilience, and epidemiological data. Information related to firefighters' activity on falls and slips, exposure to noise, and high concentrations of carbon monoxide is detailed. In addition, the relationship between burnout, cognitive, and physical fatigue as adverse effects on health and performance is mentioned. Conclusions: Among the preventive measures, the use of personal protective equipment is suggested, incorporation in prevention programs of information on exposure to risk factors, as well as the implementation of models that can predict the perception of workers, additionally, the generation of management systems with safety climate models for fire departments.

• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.460-467
• /
• 2018

Objectives: The objectives of this study are to estimate the inhalation exposure level of benzene for workers using Tier 1 exposure models ECETOC TRA (European Center for Ecotoxicology and Toxicology of Chemicals Target Risk Assessment) and Stoffenmanager, and to investigate their reliability for exposure assessment in K-REACH. Methods: Two exposure scenarios, 'manufacture of benzene' and 'use as solvents,' were developed for assessment of workers' exposure to benzene. The Process Category (PROC) for ECETOC TRA was collected from the European Chemical Agency (ECHA) registration dossier, and the Activity for Stoffenmanager was converted from PROC using translation of exposure models (TREXMO). The information related to exposure, such as working duration, Respiratory Protective Equipment (RPE), Local Exhaust Ventilation (LEV), and Risk Management Measure (RMM) were classified into high, medium, and low exposure conditions. The risk was determined by the ratio of the estimated exposure and occupational exposure limits of benzene. Results: Under high exposure conditions, the worker exposure level calculated from all PROCs and Activities exceeded the risk level, with the exception of PROC 1 and Activity 1. In the medium exposure condition, PROC 8a, 8b, and 9 and Activity 3, 7, and 8 all exceeded the risk, whereas in the low condition, all PROCs and Activities were determined to be safe. As a result, action corresponding with the low exposure condition is required to reduce the risk of exposure among workers in workplaces where benzene is manufactured or used as a solvent. In addition, the predicted exposure levels derived from the exposure models were lower than measured levels. The exposure levels estimated from Stoffenmanager were more conservative than those from ECETOC TRA. Conclusions: This study demonstrates the feasibility of exposure models for exposure assessment through the example of occupational inhalation exposure assessment for benzene. For more active utilization of exposure models in K-REACH, the exact application of collected information and accurate interpretation of obtained results are necessary.