Formwork is a temporary structure that supports its weight and that of freshly placed concrete as well as construction live loads. Among the accidents and failures that occur during concrete construction, many are formwork failures which usually happen at the time concrete is being placed. In constructions site, pipe supports are usually used as shores which are consisted of the slab formwork. The strength of a pipe support is decreasing as it is frequently being used at the construction site. The objective of this study is to find out the strength change of used pipe support and unused pipe supports according to aging. In this study, 2857 pipe supports were prepared. Among these pipe supports, 2337 pipe supports were lent to the construction companies fire of charge. 520 pipe supports were kept on the outside. Compressive strength was measured by knife edge test and plate test at each 3 month. Test results show that the strength of unused pipe supports as well as used pipe supports was decreasing according to age, use frequency and load carrier, and the strength of used pipe supports was lower than the strength of unused pipe supports at the same age. So, the strength of used pipe supports from 191 days to present day was not satisfied the specification of KS F 8001. According to these results, it shows that attention has to be paid to formwork design using used pipe supports. Therefore, the present study results will be able to provide a firm base to prevent formwork collapses.
Explosion and fire cause about 30 reported industrial major accidents a year by ignition source which discharge of electrostatic generated to flammable gas, vapor, dust and mixtures. It brings economically and humanly very large loss that accident was caused by fire and explosion from electrostatic discharge. Thus, it is very important that electrostatic discharge energy is to be control below not to be igniting flammable mixtures. There are two kinds of analysis model for electrostatic discharge, human body model and machine model. Human body model is available the parameter of human's electrical equivalent that capacitance is 100 pF, resistance is $1.5k{\Omega}$. To simulate and visualize the electrostatic discharge from human body need a very expensive and high voltage simulator. In this paper, we measured the value of capacitance and resistance concerned with test materials and sizing of specimen and the value of charged voltage concerned with test specimen and distance to develop an electrostatic charge/discharge simulating tool for teaching with which concerned industrial employee and students. The result of experiments, we conformed that the minimum ignition energy of methane-oxygen mixtures meets well the equation $W=1/2CV^2$, and found out that the insulating material and sizing of equivalent value having human body mode are the poly ethylene of 200 mm and 300 mm of diameter. Developed electrostatic charge/discharge simulating tool has many merits; simple mechanism, low cost, no need of electric power and so on.
In order to maintain the continual safety management in a company, it needs to evaluate and monitor its implementation of safety management. Because the number of major-accidents is not an effective method of indicating company's safety performance, various efforts to develop more reasonable indicators have been made in world wide. After Korean government has legally required the PSM report, PSM compliance audit has been developed and made by the authorities concerned since 2005. However, this audit consists of complicate procedures difficult to utilize as companies' own audit program and corresponds to only a conformity check that confirms whether the PSM be operated and maintained properly. So a new index by which to measure easily the level of safety performance and self-monitor the implementation of safety management is needed. We have studied a new method that may quantitatively evaluate the performance of safety management by investigating application cases in foreign countries and doing the domestic survey of lots of companies subject to PSM regulation in Korea. This study proposes three of safety performance indices(SPI) together with the several prerequisite preconditions and the timing for application of each index. Although the first draft of SPI needs further legal support, it might help to evaluate every company's safety level. The second draft of SPI is a voluntarily evaluating method based on web-site online program. The last draft of SPI consists of a series of simple questions about 12 elements of PSM. Also each of 3 indices has differences in evaluation methodology and application area and, therefore, they may be used concurrently.
The purpose of this study was to investigate the effects of safety culture on the safety awareness and safety behaviors of manufacturing workers, and to suggest ways for manufacturing workers to understand the safety culture and improve safety awareness and safety behavior. In order to verify this, data were collected from 282 research subjects for 1 month from August 1 to 31, 2018, using the manufacturing workers in the Seoul and Gyeonggi area as a population. The results of the study are as follows. First, the safety culture (safety climate, safety procedures) has a positive effect on the safety awareness (recognition of importance, interest and participation inducement) of the manufacturing workers. Second, the safety culture (safety climate, safety procedures) has a positive effect on the safety behavior (safety planning, safety check) of manufacturing workers. Third, safety awareness (recognition of importance, interest and inducement of participation) has a positive influence on the safety behavior (safety planning, safety check) of manufacturing workers. Fourth, the safety awareness (recognition of importance, interest and inducement of participation) appears to have a partial mediating effect in relation to safety culture (safety climate, safety procedure) and safety behavior (safety planning, safety check) of manufacturing workers. The implication of this study is that although the industrial accidents have occurred in the manufacturing industry in recent years, the studies on the workers in the manufacturing industry are insufficient. However, this study is meaningful that it has suggested ways for manufacturing workers to understand the safety culture and improve the safety awareness and safety behavior by analyzing the effects of safety culture on safety awareness and safety behavior of manufacturing workers.
Our study was designed to identify the difference in the mental health status among hospitalized patients due to occupational diseases and accidents and pre-employment physical examinees, and to identify the relationship between mental health status and socio-demographic variables, and to provide information useful to non-psychiatric clinicians in caring of such patients. Samples were comprised of 189 pneumoconiotic patients, 132 industrial accident-induced patients and 122 pre-employment physical examinees who were interviewed with 90-item symptom cheklist (SCL-90). The following results were obtained: 1) Mean scores of symptom dimension on socio-demographic subgroup showed higher tendencies in older aged, male, lower educated, miner, married, mining residence, and pneumoconiotic patients. 2) Mean scores of total samples on all symptom dimensions were as follows in the order of their magnitudes; Depression, Somatization, Obsessive-compulsive, Anxiety, Psychoticism, Interpersonal sensitivity, Phobic-anxiety, Hostility, and Paranoid ideation. 3) The highest mean scores on each socio-demographic subgroup were as follows; Depression in younger aged and Somatization in older aged; Depression in male Somatization in female; Somatization in lower educated and depression in higher educated; Somatization in miners and depression in non-miners; Somatization in married and Depression in unmarried; Depression in all kind of residences; Somatization in patients and Depression in pre-employment physical examinees(normal). 4) In consequence of stepwise multiple regression, the important socio-demographic variables were age, occupation, diagnostic classification, and residence. Age was the most imprtant variable in Somatization, Depression, Obsessive-compulsive, Anxiety, Phobic anxiety, Paranoid ideation, and Psychoticism. Occupation was the most important one in Interpersonal sensitivity and Hostility and also had significant realtionships with all symptom dimensions.
The estimated on-site accident rate in Forestry is relatively high. According to statistics of the accident, in the recent 5 years, from 2014 to 2018, forestry accidents have resulted in 98% of injuries and 87% of fatalities. Especially, there are significant geographical constraints to access to the scene in case of an accident. Even though the capacity of first aid capacity is notably emphasized its importance to minimize the scale of damages, the relevant employees have been educated only basic first aid, which is not considered circumstances or geographic limitations, by Occupation Safety and Health Acts. Therefore, the purpose of this study is to derive a direction for a forest emergency service system to increase forestry workers' survival and prevent secondary injury through securing 'Golden Time.' This study conducts analyzing relevant laws and regulations in domestic and international settings as well as looking at several concerned accident cases. The outcome of analysis presents an issue regarding the implementation of onsite first aid in forestry and existing risk factors depending on the working process. Finally, we suggest two ways to improve the forest emergency service that are 1) an appropriate curriculum and kit for forest first aid; and 2) a system for emergency transfer through sharing information between National Fire Agency (NFA) and emergency medical service center, and emergency and rescue mission using helicopter from NFA and Korea Forest Service.
건설업은 국내 산업 중 안전사고가 가장 많이 발생한다. 건설업의 재해는 막대한 재산손실과 인명피해로 인한 사회적 문제로 이어지기 때문에 더 각별한 주의를 기울여야 한다. 최근 이로 인해 건설업에서 발생하는 재해에 대한 경각심이 높아지고 있으며 정부 각 부처에서는 안전관리에 관한 규정을 강화하고 있다. 특히 산업안전보건공단에서는 이번 산업안전보건법 전부개정안에서 보호대상의 확대와 책임소재의 명확화에 중점을 두고 있다. 이에 따라 발주자 책임에 의한 안전관리를 중심으로 분석한 연구가 필요한 실정이다. 따라서 본 연구에서는 건설사업관리자의 사업수행능력평가를 산업안전보건법의 전부개정안을 고려하여 안전항목을 고려하여 건설사업관리자를 선정하는 방안을 제시하고자 한다.
Objectives: This study aims to classify the latent profiles in the exposure to hazard factors of salaried employees and test the determinants. Methods: Latent profile analysis(LPA) was conducted using data from the fifth Korean Working Conditions Survey(KWCS). 30,050 of salaried employees were the subjects of this study. After classifying the employees, multinomial logistic regression was used to test the determinants. Results: Salaried employees were classified with three latent profiles based on the exposure to the hazard factors. Employees included in class 1(32.8%) tend to experience low level of physical hazard factors, moderate level of psychological hazard factors, and high level of office work hazard factors. Employees included in class 2(61.8%) tend to be exposed to the moderate to high level of physical hazard factors, moderate to low level of psychological hazard factors, and low level of office work hazard factors. Employees included in class 3(5.4%) tend to experience high level of psychological and physical hazard factors, and moderate level of office work hazard factors. After classification, the demographic, health-, and employment-related variables were tested. Conclusions: This study clarified the features of each class, and proved that employees in class 3 are quite hazardous in that they are exposed to physical and psychological hazard factors much more frequently than other employees. Thus, this study can be used in predicting the high-risk employees and taking preemptive measures for preventing industrial accidents.
Purpose : The purpose of this study has been performed to find the relationship between seafarers' cumulative fatigue and stress by evaluating autonomic nervous functions and the results of surveys conducted using questionnaires. Methods : The subjects were seafarers working on various ships (home trade ships) of South Korea, who were healthy adults without any diseases, as confirmed through preliminary surveys were recruited through simple random sampling. A device that measures autonomic nervous functions by analyzing heart rate variability, which is also used often in clinical diagnoses and studies at universities, university hospitals, and general hospitals was used to measure the seafarers' cumulative fatigue and stress. Pearson's correlation analyses were also conducted to test the relationship between cumulative fatigue and stress measured by evaluating autonomic nervous functions and the results of surveys conducted with questionnaires. Results : There was no correlation between mean cumulative fatigue measured for each ship type and seafarers position through autonomic nervous functions evaluation and fatigue severity scale (FSS). There also was no correlation between the mean levels of stress measured for each ship type and seafarers position through autonomic nervous functions evaluation and survey scores of Korean occupational stress scale (KOSS). Conclusion : Therefore, in order to prevent man-made accidents in the sea among seafarers working with irregular port entry/departure schedules and under environments involving continued vibration, noises, and shaking, it is necessary to analyzed cumulative fatigue and stress scientifically and objectively, such as through autonomic nervous functions evaluation rather than through surveys.
For preventing the accidents generated from the chemical materials, thus far, MSDS (Material Safety Data Sheet) data have been made to notify how to use and manage the hazardous and chemical materials in safety. However, it is difficult for users who handle these materials to understand the MSDS data because they are only listed based on the alphabetical order, not based on the specific factors such as similarity of characteristics. It is limited in representing the types of chemical materials with respect to their characteristics. Thus, in this study, a lots of MSDS data are visualized based on relationships of the characteristics among the chemical materials for supporting safety managers. For this, we used the textmining algorithm which extracts text keywords contained in documents and the Self-Organizing Map (SOM) algorithm which visually addresses textual data information. In the case of Occupational Safety and Health Administration (OSHA) in the United States, the guide texts contained in MSDS documents, which include use information such as reactivity and potential risks of materials, are gathered as the target data. First, using the textmining algorithm, the information of chemicals is extracted from these guide texts. Next, the MSDS map is developed using SOM in terms of similarity of text information of chemical materials. The MSDS map is helpful for effectively classifying chemical materials by mapping prohibited and hazardous substances on the developed the SOM map. As a result, using the MSDS map, it is easy for safety managers to detect prohibited and hazardous substances with respect to the Industrial Safety and Health Act standards.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.