• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.167-174
• /
• 2014

Heating and air conditioning system is changing rapidly from the traditional HVAC central supply system to the individual supply system with electrical heat pump system (EHP) in Korean school buildings. The individual supply system has advantages to turn on and off individually and to adjust the thermal comfort separately, but energy is wasted in the unoccupied classroom when the last leaving occupant does not turn off the controller. If the controller is to be off automatically while the classroom is not in use, energy consumption would decrease dramatically. This project aims to cease the unnecessary EHP supply in vacant classroom by inputting the class schedule from the central control room to reduce the energy-spending. Experimental measurements were carried out between the controlled classroom that is turned off when not in use and the uncontrolled room that is turned on continually. Occupant's comfort and energy consumption were measured and compared between the controlled case and the uncontrolled case. The energy consumption of controlled classroom case is 30-60% less than that of the uncontrolled classroom case. This result shows that controlling the cooling supply for the unoccupied classroom using the class schedule can decrease the energy consumption remarkably. This supply control system can be used to conserve energy in school structures like universities.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.89-98
• /
• 2007

Crashworthiness design is of special interest in automotive industry and in the transportation safety field to ensure the vehicle structural integrity and more importantly the occupant safety in the event of the crash. Front side assembly is one of the most important energy absorbing components in relating to the crashworthiness design of vehicle. The structure and shape of the front side assemblies are different depending on automakers. Thus, it is not easy to grab an insight on designer's intention when you glance at a new front side member without experiences. In this paper, we have performed the explicit nonlinear dynamic finite element analysis on the front side assembly of a passenger car to identify the mechanical roles of each part of the assembly and to enhance the absorbing energy from the viewpoint of reverse engineering.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.334-339
• /
• 2008

Recently the consideration for occupant's security has been raised as very important design element from the fire by building's large sized, higher storied, and its compounded. But the domestic laws regulated the predicative laws according to the technical standard which has no difference from the past domestic evacuation regulation. Therefore, regulation of escape code and developing technology for Korean conditions are needed to reduce victims during disaster by protecting occupant and guiding people to safe places.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.340-347
• /
• 2008

Recently the consideration for occupant's security has been raised as very important design element from the fire by building's large sized, higher storied, and its compounded. But the domestic laws regulated the predicative laws according to the technical standard which has no difference from the past domestic evacuation regulation. Therefore, regulation of escape code and developing technology for Korean conditions are needed to reduce victims during disaster by protecting occupant and guiding people to safe places.

• Structural Engineering and Mechanics
• /
• v.18 no.3
• /
• pp.287-301
• /
• 2004

Structural acceleration regulation is a means of managing structural response energy and enhancing the performance of civil structures undergoing large seismic events. A quadratic output regulator that minimizes a measure including the total structural acceleration energy is developed and tested on a realistic non-linear, semi-active structural control case study. Suites of large scaled earthquakes are used to statistically quantify the impact of this type of control in terms of changes in the statistical distribution of controlled structural response. This approach includes the impulses due to control inputs and is shown to be more effective than a typical displacement focused control approach, by providing equivalent or better performance in terms of displacement and hysteretic energy reductions, while also significantly reducing peak story accelerations and the associated damage and occupant injury. For earthquake engineers faced with the dilemma of balancing displacement and acceleration demands this control approach can significantly reduce that concern, reducing structural damage and improving occupant safety.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.113-124
• /
• 2012

PURPOSES : In This study two different concrete barrier systems have been proposed to be established at the small vehicle driveway. One is for median barrier, and the other is for roadside barrier. METHODS : In order to determine the suitable shape of barrier, the impact parameters including vehicle weight, impact angle, impact velocity and impact level have been analyzed. The real crash test has been carried out with 0.9 ton and 2.5 ton vehicles, respectively by using the 2m segment type concrete barriers connected by steel plates that are totally 40m barrier systems. RESULTS : The numerical results obtained by LS/DYNA-3D software are compared with real crash tests from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS : From the above results, the dynamic performance of proposed barrier systems satisfies the specification of Korean Code for roadside safety structures.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.195-199
• /
• 2006

According to the United States FMVSS 208, every passenger car on the market after September of 2006 must install a safety system, which can deploy the airbag with different intensity or suppression based on the passenger type, to reduce infant and child injuries from airbag deployments. The Weight Classification System, which has been developed by Hyundai Autonet, is a system that classifies the person occupying the passenger seat. To overcome sensing problems due to the weight sensors small voltage, the Distributed Systems Interface is adopted.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.84-87
• /
• 2000

Square tubes used for vehicle structure components have an important role on keeping its stiffness and preserving occupant safety in vehicle collision and rollover in which it experience axial collapse, bending collapse or both. Bending collapse, which absorbs kinetic energy of the impact and retains a survival space for the occupant, is a dominant failure mode in oblique collision and rollover. Thus, in this paper, the bending collapse characteristics such as the maximum bending moment and energy absorption capacity of the square tube replaced by light-weight material were evaluated and presented. The bending test of cantilever tubes which were fabricated with aluminum, GFRP and aluminum/ GFRP hybrid by co-curing process was performed. Then the maximum bending moment and the energy absorption capacity from the moment-angle curve were evaluated. Based on the test results, it was found that aluminum/ GFRP hybrid tube can show better specific energy absorption capacity compared to the pure aluminum or GFRP tube and can convert unstable collapse mode which may occur in pure GFRP tube to stable collapse mode like a aluminum tube in which plastic hinge is developed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.79-85
• /
• 2003

The child restraint system is blown to be excellent to reduce child occupant injury in frontal collisions. The effects of the child restraint system are experimently investigated according to FMVSS 213. A sled simulator is utilized with varying restraint types such as 2point, 3point seat belts, forward-facing types and booster types of child restraint systems. The head and chest injuries for various cases are evaluated based on industrial standards. Also, the maximum displacements of the head and the knees are measured by film analysis. Using the results of the test, the effects of the child restraint system is discussed and reduction of child occupant injury is pursued.

• Journal of Trauma and Injury
• /
• v.28 no.3
• /
• pp.98-103
• /
• 2015

Purpose: To compare injury sustained and severity of child occupant according to the types of safety restraint systems in motor vehicle crashes. Methods: This was a retrospective observational study. The study subjects were child occupants under the age of 8 years who visited a local emergency center following a motor vehicle crash from 2010 to 2014. According to safety restraint: child restraint systems (CRS), belted, and unbelted, we compared injuries sustained and injury severity using the maximal Abbreviated Injury Scale (MAIS) and Injury Severity Score (ISS), and analyzed the characteristics of severe injuries (AIS2+). Results: Among 241 subjects, 9.1% were restrained in CRS, 14.5% were only belted, and 76.3% was unbelted at the time of the crashes. Fourteen had severe injuries (AIS2+), all of whom didn't be restrained by CRS. Injuries in face and neck were the highest in unbelted group, and MAIS and ISS were the lowest in CRS group. Conclusion: Among safety restraint systems for child occupant in motor vehicle crashes, the CRS have the preventive effect of face and neck injuries, and are the most effective safety restraint systems.