• Journal of Trauma and Injury
• /
• 제29권4호
• /
• pp.204-208
• /
• 2016

For an orthopaedic surgeon, the critical decisions to either amputate or salvage a limb with severe crushing injury with progressive ischemic change due to arterial rupture or occlusion can become a clinical dilemma at the Emergency Department (ED). And reperfusion injury is one of the fetal complications after vascular reconstruction. The authors present a case which was able to save patient's life by rapid vessel ligation at bedside to prevent severe reperfusion injury. A 43-year-old male patient with no pre-existing medical conditions was transported by helicopter to Level I trauma center from incident scene. Initial result of extended focused assessment with sonography for trauma (eFAST) was negative. The trauma series X-rays at the trauma bay of ED showed a multiple contiguous rib fractures with hemothorax and his pelvic radiograph revealed a complex pelvic trauma of an Anterior Posterior Compression (APC) Type II. Lower extremity computed tomography showed a discontinuity in common femoral artery at the fracture site and no distal run off. Surgical finding revealed a complete rupture of common femoral artery and vein around the fracture site. But due to the age aspect of the patient, the operating team decided a vascular repair rather than amputation even if the anticipated reperfusion time was 7 hours from the onset of trauma. Only two hours after the reperfusion, the patient was in a state of shock when his arterial blood gas analysis (ABGA) showed a drop of pH from 7.32 to 7.18. An imminent bedside procedure of aseptic opening the surgical site and clamping the anastomosis site was taken place rather than undergoing a surgery of amputation because of ultimately unstable vital sign. The authors would like to emphasize the importance of rapid decision making and prompt vessel ligation which supply blood flow to the ischemic limb to increase the survival rate in case of profound reperfusion injury.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.7-21
• /
• 1979

This investigation was to analyse normal protrusive and lateral condylar pantographic records written on the sagittal plane and to study components of Fisher's angle and their interrelations. The purpose of this study was limited to (1) discussing the significance of sagittal pantographic record in diagnosis of occlusal disease and(2) basing for reasoning validity of measuring Fisher's angle which has been reported so far. As a result followings were concluded. 1. In each protrusive and lateral condylar movement path, five complicate factors such as initial straightness, distributed simple sigmoid type, simple curvature, initial tiny protruding convexity and tiny repeated sigmoid patterns were noted. Generally each condylar movement path was composed of two to three of these factors. 2. The distribution of positional interrelations of protrusive and lateral condylar paths could be divided into five categories; (a) protrusive-upper, (b) completely coinciding, (c) partially initial coinciding, (d) partially inverted crossing, and (e) completely inverting. Among these, protrusive path-upper positioned condyles were prevailed (79.2%). 3. The distribution of interrelations of protrusive and lateral condylar paths could be devided into five categories according to their distances in the course of movement. Among these, opening (95.8%) and paralleling (66.7%) were prevailing. 4. The involved number of characteristic heterogenous patterns of five categories in protrusive and lateral condylar movement recording relations at one simultaneous recordings was limited to three. However, in case of homogeneous patterns were repeated, usually three to four were included. 5. The maximum distance between protrusive and lateral condylar paths was 1.45mm at the location of 4mm advanced position from centric relation point and 3.90mm at the location of protrusive movement terminal. 6. It seemed to be that ,pantographic records should be consulted other clinical symptoms in order to make certain occlusion diagnosis. 7. At the present moment of investigation, expressing Fisher's angle as a degree revealed a lack due to inherent complexity of protrusive and lateral condylar movement paths. 8. The typical pattern of protrusive and lateral condylar paths written on a pantographic sagittal plate might be described as follows; (a) protrusive condylar path should be positioned upwardly, (b) both mainly be simple curvature, (c) interrelations mainly be opening or paralleling. 9. The mean amounts of separation between protrusive and lateral condylar movement path were $0.75{\pm}0.46$ at 4mm advanced location from centric relation and $1.74{\pm}0.64mm$ at the location of protrusive path terminal.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• 구강회복응용과학지
• /
• 제29권1호
• /
• pp.11-21
• /
• 2013

임플란트 식립 후 상부구조 제작 시기를 결정하기 위해 임플란트 고정체의 골유착과 안정성의 평가는 중요하며 임플란트 안정성이 변화하지 않는 고원(plateau) 현상이 나타나는 시점을 찾는다면 임플란트 저작하중에 안정적인 시기를 판단하는 객관적 지표가 될 수 있다. 본 연구의 목적은 1년간의 전향적인 연구를 통해 골밀도 간 임플란트 안정성 변화를 추적하여 저작하중을 부담하기에 적당한 안정된 시점을 구함으로써 상부구조 제작 시기를 예측하고자 하였다. 총 36명의 환자에게 식립된 67개의 임플란트를 대상으로 식립 직후, 2주, 6주, 10주, 14주, 1년 등 총 6회에 걸쳐 RFA를 시행하여 임플란트 안정성의 변화추이를 골밀도에 따라 비교 분석하였다. 식립 직후와 각 치유기간 동안의 ISQ값 비교에서 주관적으로 평가된 골질군 간에는 식립 10주와 14주에서 임플란트 안정성에 차이가 있었으나(P<0.01), 객관적으로 평가된 골질군 간에는 임플란트 안정성 변화에 차이가 없었다(P>0.05). 본 연구의 1년간의 추적조사에서 ISQ값의 변화는 $y=y_0+a{\times}\{1-\exp(-b{\times}x)\}$로 나타낼 수 있었으며, 이를 이용하면 임플란트식립 당시의 ISQ값으로 상부구조 제작 시점을 유추할 수 있다.

• 구강회복응용과학지
• /
• 제33권2호
• /
• pp.114-118
• /
• 2017

목적: 이 연구의 목적은 타이타늄 구성요소를 가진 지르코니아 지대주가 내부연결 임플란트에 사용되었을 때 나사 풀림에 대해 알아보는 것이다. 열순환 후 타이타늄 소켓을 가진 지르코니아 지대주와 타이타늄 지대주의 나사 풀림과 제거력을 비교 분석하였다. 연구 재료 및 방법: 내측연결 임플란트와 내측연결 타이타늄 지대주, 타이타늄 소켓을 가진 외측연결 지르코니아 지대주를 준비하였다. 내부연결형 임플란트에 5개의 타이타늄 지대주를(대조군), 타이타늄 소켓을 가진 5개의 지르코니아 지대주(실험군)를 각각 연결하고 30 Ncm의 토크로 조인 후 열순환 처리 전후의 지대주 나사 제거력을 측정하였다. 각 시편들은 열순환 장치의 수조에서 $5^{\circ}C$와 $55^{\circ}C$의 물에 60초씩 교대로 2,000회의 열순환을 시행하였다. 각 시편의 나사 풀림을 조사하고 열순환 전후에 나사 제거력을 통계학적으로 분석하였다. 결과: 두 그룹 모두에서 열순환 후 지대주 나사 풀림을 보이지 않았다. 열순환 전후의 나사 제거력 차이는 대조군에서 $-1.34{\pm}2.53Ncm$, 실험군에서 $-1.26{\pm}2.06Ncm$ 로 나타났다. 독립표본 T 통계분석 결과 두 군간에 유의한 차이를 보이지 않았다(P > 0.05). 결론: 이 실험의 결과 내에서 내부연결 임플란트를 위한 지르코니아 지대주 내 타이타늄 소켓이 열순환 후 지대주 나사풀림에 타이타늄 지대주와 비교하여 유의한 영향을 나타내지 않았다.

• 구강회복응용과학지
• /
• 제33권4호
• /
• pp.269-277
• /
• 2017

목적: 치과의사의 사용 만족도 비교를 통해 두 가지 피에조 엔진의 성능을 비교평가 하고자 한다. 연구 재료 및 방법: 본 연구에서는 두 가지의 피에조 엔진을 평가하였다:TRAUS XUS10 (Saeshin), PIEZOSURGERY touch (Mectron). 20명의 치과의사가 11개 평가항목에 답하였고, 평가결과는 Likert의 5점 척도를 적용하여 수치화하였다. 핸드피스 소음평가는 10초 동안 5회 측정하여 최고소음을 비교하였다. 핸드피스 발열평가는 세 부위에서 3분동안의 발열량을 측정하였다. 결과: 평가항목 중 '주수펌프 모터의 소음'에서 TRAUS XUS10이 PIEZOSURGERY touch보다 유의하게 만족도가 높았다. 반면, '기능key의 만족도'와 '핸드피스 발열정도'는 PIEZOSURGERY touch가 더 우수했다. 소음 최대값은 TRAUS XUS10이 56.6 dB, PIEZOSURGERY touch는 56.0 dB였다. 두 기기 모두 3분 작동 후 $41^{\circ}C$ 미만의 열을 발생시킴으로써 안전기준을 만족하였다. 결론: TRAUS XUS10는 '기능 key' 및 '핸드피스 발열정도'에서 약간의 개선을 한다면 그 외 대부분의 평가항목에서는 PIEZOSURGERY touch과 견줄만한 성능을 보인다.

• 구강회복응용과학지
• /
• 제34권2호
• /
• pp.104-115
• /
• 2018

목적: 본 연구는 현재 시판되고 있는 구강스캐너를 사용하여 구강스캐너 정확도 평가를 위해 국제표준이 제안하고 있는 모형의 스캔이미지 획득이 가능한 지 분석하고, 이를 통해 표준모델이 가지고 있는 문제점을 파악하는 데 있다. 연구 재료 및 방법: ISO12836과 ANSI/ADA no.132에서 규정하는 국제표준을 참고하여 3D 프린터기를 이용하여 모델을 제작하였으며, 모델스캐너와 두 가지 구강스캐너를 이용하여 스캔을 하였다. 스캔이미지 획득 정도를 3등급으로 분류하여 스캐너의 성능을 비교하였으며, 모델 표면의 상태에 따른 이미지 획득 능력도 비교하였다. 결과: 모델 스캐너가 모든 모델에서 가장 우수한 이미지를 얻을 수 있었으며 TRIOS3는 둥근 형태의 구조물, CS3500은 각진 형태의 구조물에 대한 이미지 재현이 좋은 결과를 보였다. 표준 모델의 표면상태에 따른 스캔이미지 재현에서는 초경석고 모델이 스캐너 종류와 관계없이 가장 우수하였다. 3D 프린팅 모델의 경우, 표면에 파우더 처리를 한 모델에서 가장 우수한 스캔이미지를 얻을 수 있었다. 결론: ISO12836과 ANSI/ADA 132의 표준모델의 경우, 구강스캐너의 field of view (FOV)를 벗어나는 구조물을 스캔할 때 서로 다른 면인 것을 구분하는 기준점이 존재하지 않게 되면 연속적인 스캔 및 정합과정에서 정확한 이미지를 나타내지 못한다는 것을 알 수 있었다. 그러므로 단순한 패턴의 반복과 대칭구조를 가지지 않는 새로운 표준모델이 필요하다고 여겨진다.

• 대한치과교정학회지
• /
• 제28권1호
• /
• pp.113-122
• /
• 1998

본 연구는 조선대학교 부속 치과병원 교정과에 내원하여 교정치료를 시행하고 있는 환자중 Panadent 교합기 및 condylar position indicator(CPI)를 이용하여 중심위-중심교합 편위양을 측정한 결과, 전후방 및 수직적 편위양이 1.00mm이내, 측방편위양이 0.30mm 이내인 정상범주를 넘는 부정교합 환자 47명을 대상으로 하여 3개월간 교합안정장치를 24시간 장착하고, CPI 및 transcranial projection을 이용하여 교합안정장치 장착전과 장착후의 하악과두의 위치변화를 관찰한 결과 다음과 같은 결론을 얻었다. 1. CPI상의 모든 군에서 중심교합-중심위 사이에 통계적인 유의성이 있었다(p<0.001). 2. transcranial projection상의 superior joint space의 Rt와 Lt+Rt/2에서 중심교합-중심위 사이에 통계적인 유의성이 있었다(p<0.05). 3. CPI상의 모든 superior-inferior components군에서 교합안정장치 사용 전, 후의 중심교합-중심위 사이에 통계적인 유의성이 있었다(p<0.01). 4. transcranial projection상의 superior joint space의 Rt를 제외한 모든 군에서 교합안정장치 사용 전, 후의 중심교합-중심위 사이에 통계적인 유의성이 없었다. 이상의 결론을 종합해 볼 때 중심교합-중심위 사이의 변화를 평가하는데는 transcranial projection보다 CPI가 보다 유용하며, 교합안정장치는 하악과두의 전, 후방적 위치변화보다는 수직적 위치변화에 미치는 영향이 보다 큰 것으로 보인다.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.691-694
• /
• 2010

Purpose: Central giant cell granuloma is a rare, benign giant cell tumor which commonly develops in areas near the teeth. It accounts for approximately less than 7% of benign tumors of the mandible. Clinically, central giant cell granuloma is classifed into aggressive and non-aggressive type, and usually requires surgical treatment. There has been no report of central giant cell granuloma in plastic surgery field of the country, and we report a case with a brief review of the diagnosis and treatment of the disease. Methods: A 23-year-old male presented with a hard, non-tender, growing mass with the size of $4.0{\times}3.0\;cm$ on mandible for several months. Computed tomography scan showed a solid mass within thinned outer cortex on mandible. The thinned outer cortex was excised with the mass and the inner cortex was partially removed burring. After the tumor removal, mandible was fixed by reconstruction plate. Results: Pathologic report showed numerous large multinucleated giant cells, diffusely distributed in a background of ovoid-to-spindle-shaped mononuclear cells. There was no evidence of recurrence after 1 year follow up. Bony defect was regenerated and we removed the reconstruction plate. Conclusion: Removal of central giant cell granuloma results in defect of outer cortex, which can be reconstructed by using reconstruction plate, autologous bone graft or bone cement. We used reconstruction plate as a conservative method to induce secondary healing of the outer cortical defect area, which resulted in normal mastication and occlusion with no recurrence.

• Archives of Reconstructive Microsurgery
• /
• 제5권1호
• /
• pp.35-45
• /
• 1996

After transplantation of groin free flap was sucessed by the Daniel and Taylor in 1973, the reconstruction of plastic surgery was extensive and universal due to rapidly developement of anatomic study of the donor site and technique of microvascular surgery. The free tissue transfers is possible to be early activity and rehabilitation by one stage operation. It currently available allow transfer of specific tissue quality as bone, muscle, nerve to achieve a functional and cosmetic result as well as the most favorable secondary defect. But free flaps require critical, skillful technique and lengthy operating time. Also it has disadvantage of donor site morbity at the large tissue transfer. Authors were transferred with 107 cases in 103 patients from May 1987 to June 1996, and then we analysed free tissue transfer to acquire more increased sucess rate, satisfactory functional and cosmetic results. The sexual distribution was male prominent in 79 cases(76.7%), female in 24(23.3%) and age was variable distribution from 3 to 76 years old. The cause of defects was most prevalent in trauma of traffic and industrial accident in 51 cases(49%). The common recipient site were lower extremities in 47 cases(43.9%), upper extremities in 28 cases(26.5%), head and neck in 25 cases(23.4%), and trunk in 7 cases(6.5%). The type of transfer were free skin flaps in 46 cases(43%), free muscle or musculocutaneous flaps in 31 cases(29%), free vasculized or osteocutaneous flaps in 10 cases(9.3%), and specilized free flaps in 20 cases(18.7%). The anastomosis of artery was end to end anastomosis in 94 cases(87.9%), end to side anastomosis in 13 cases(12.1%) and all vein was end to end anastomosis. The number of anastomosed vessels were one artery one vein in 62 cases(57.9%), one artery two vein in 45 cases(42.1%) and vein graft was performed only one case. The postoperative mornitoring were used with temperature, color of flap, capillary refilling time, ultrasonogram, bone scan, doppler, and endoscopy. The reexploration was performed in 9 cases(8.4%), and then flap was loss in 3 cases(2.8%). Accordingly overall success rate was 97.2%. The postoperative complication was early vascular occlusion, hematoma, partial necrosis and late bulkiness, scarring, color dismatch etc. Therefore, free tissue transfer is the preferred method of treatment, even through conventional local and distant flaps are available.