• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.143-148
• /
• 2009

Introduction: To correct abnormal occlusal plane by orthognathic surgery, we need to have clear criteria for therapeutic occlusal plane. Authors introduced the concept of individualized ideal occlusal plane(Y-plane), which is determined by the size and form of the mandible, and the ideal incisor tip considering upper and lower lip. Authors studied the following to verify if the actual occlusal plane of the patients with optimal jaw relationship corresponds with the individualized ideal occlusal plane. Patients: We reviewed 44 patients who have normal occlusion visitied in the Dept. of orthodontics, Pundang CHA hospital. Methods: We evaluated if there are agreement between individualized ideal occlusal plane(Y plane) and occlusal plane of actual patients. And we confirmed if tested group has a normal face by measuring FABA, FMA, AB-LOP. Results: There were no significant differences of FABA, FMA, AB-LOP, Mo-Y plane between male and female. FABA, FMA and AB-LOP were included in the normal value. Average distance of Mo-Y plane was $0.75{\pm}0.78mm$. Conclusion: Individualized ideal occlusal plane may be applied to orthognathic surgery.

• 대한치과교정학회지
• /
• 제21권2호
• /
• pp.367-397
• /
• 1991

This study was aimed to investigate the occlusal plane inclination in relation to the skeletal and dental assessment measurements in order to provide a reference in orthodontic treatment planning as the occlusal plane should be reconstructed orthodontically or gnathologically. The sample consisted of 73 normal occlusions and 113 malocclusions of adults. The computerized statistical analysis of 38 occlusal plane's and 29 skeletal and dental measurements were carried out with SPSS. The conclusions were as follows; 1 In normal occlusion, COP-NaPog was average $83.63^{\circ}$ (2.44) and occlusal plane inclination had a strong negative correlation with SNB and FH-NaPog. 2. In normal occlusion, ArANS plane was nearly parallel to the occlusal plane. 3. In malocclusion, the larger the mandibular plane angle and the shorter the ramus height was, the more downward the occlusal plane had a tendency to tip anteriorly. 4. Occlusal plane was more horizontal in deep bite group, while it was steeper in openbite group. 5. The curve of Spee was severe in deep bite group but in openbite group mandibular occlusal plane showed average reverse curvature, where it was found that the configuration of the occlusal plane contributed to the excess or deficiency of anterior overbite.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권3호
• /
• pp.229-237
• /
• 2000

According to the functional matrix theory, Delaire proposes that individual occlusal plane was determined by variable effects of teeth, maxilla, mandible, cranium, cranial base and soft tissue matrix including the orofacial musculature. and that there is the ideal occlusal plane determined by the most proper spatial position of maxilla and mandible, functionally and esthetically. This study was designed to find out the relation between Delaire's ideal occlusal plane and muscle activity of masticatory muscles in individuals who have normal maxillo-mandibular relationships. Lateral cephalometric radiographs were taken and his/her individual occlusal plane and ideal occlusal plane were analyzed with Delaire's architectural and structural craniofacial analytic method. For evaluation of muscle activities of masticatory muscles, electromyography of anterior temporal muscle, superficial masseter muscle, and anterior belly of digastric muscle was recorded in fifty Korean normal Angle class I occlusion individuals. According to the average value of ideal occlusal plane, fifty normal Angle class I occlusion individuals were classified into three groups: Ideal occlusal plane group(I group), hyperrotation group(I+ group) and hyporotation group(I- group). The result of this study was as follows: 1. The results of Delaire's architectural and structural craniofacial analysis of lateral cephalography of the fifty Korean normal Angle class I occlusion individuals are that twelve persons(24%) have consistent or parallel with ideal occlusal plane and the average of angular difference was $1.22^{\circ}{\pm}3.69^{\circ}$. 2. There is no significant difference in muscle activities of masticatory muscles during resting(p<0.05), but significant increases of muscle activity of ipsilateral anterior temporal and masseter muscle, contralateral anterior belly of digastric muscle during unilateral chewing and of anterior temporal and masseter muscle during bilateral clenching(p<0.05). 3. To find out the effect of the angular difference between Delaire's ideal occlusal plane and real occlusal plane to muscle activity, muscle activities of masticatory muscles were compared with three groups in each other; I group, I+ group and I- group. The results were no significant differences during resting, unilateral chewing and bilateral clenching.(p>0.05) 4. Although there is no significant differences of masticatory muscle activities among the three groups, the fact that increasing tendency of masseter muscle activity of ideal occlusal plane group(I+) than those of any other groups(I+ and I-) during bilateral clenching was noted. There is only the implication that occlusal plane makes some effects on masticatory muscle activities, espacially that of masseter muscle during bilateral clenching. In conclusion, the hypothesis that occlusal plane is one of the factors which affect the muscle activities of masticatory muscles and that anyone whose occlusal plane consistent with Delaire's ideal occlusal plane has an extraordinary functional advantage in masticatory muscle function cannot be proven with electromyography methods.

• 대한치과의사협회지
• /
• 제25권9호통권220호
• /
• pp.861-872
• /
• 1987

The Purpose of this study was to know the differences between the occlusal plane angles formed by F-H plane on cephalograms and the occlusal plane angles by the upper margin of the articulator, and to ind the contributing factors to the difference of occlusal angles. for this study, 39 young adults (20 men, 19 women) were selected who had normal occlusion, no severe attrition, no missing tooth, not been under orthodontic treatment and occlusal equilibration and no temporomandibular disorders. The maxillary casts were mounted with Hanau 159-1 ear piece type face-bow and measured the occlusal plane angle with prototype occlusal plane projector. The following results were obtained; 1. The mean value of the ear rod F-H plane occlusal angle was 14.75˚, articulator occlusal angle was 9.26˚ and strong positive correlation between these angles, 2. It was almost same angle between the ear rod F-H plane angle (14.75˚) and the beyron point to infraorbital rim-6mm. occlusal angle (14.46˚) 3. The mean distance from the ear rod porion to the Byron point was 5.67mm. 4. It was no significant correlation between the distances Po-Beyron point, Or-infraorbital rim and articulator occlusal angle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권1호
• /
• pp.25-34
• /
• 1997

This study was made with lateral cephalometric radiography of 28 skeletal class III malocclusion patients that were performed to setback surgery of mandible. The 28 patients were selected by four standards as follows. 1) Set-back amount of mandible is below 10 mm 2) No extrusion and intrusion of posterior tooth or alteration of interincisial angle at period of postoperative orthodontic treatment. 3) Change of mesial segment location of mandible on lateral cephalometrics 4) No genioplasty And 28 patients were divided to three group(1,2,3 group) by degree of preoperative occlusal plane angle to Burstone's horizontal plane. The preoperative occlusal plane angle, which of 1 group was smaller than $7^{\circ}$ and 2 group was between $7^{\circ}$ to $15^{\circ}$ and 3 group was larger than $15^{\circ}$. The results were as follows : 1. As the preoperative occlusal plane angle was larger, the degree of mandibular prognathism was not severe. 2. On comparsion of preoperative and immediate postoperative cephalometric analysis, specific relationship of occlusal plane angle and set-back amount of mandible was not present. 3. As the preoperative occlusal plane angle was smaller, the alteration of postoperative occlusal plane angle was increased tendency. As the preoperative occlusal plane angle was larger, the alteration of postoperative occlusal plane angle was decreased tendency. 4. The relapsed degree of B point distance to Vertical plane was not relationship to the degree of preoperative occlusal plane angle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.141-147
• /
• 2007

The purpose of this study was to evaluate the effects of maxillary occlusal plane angle to postoperative skeletal stability by comparative analysis after two-jaw surgery of patients with skeletal CIII malocclusion. This study was made with lateral cephalometric radiography of 52 patients with skeletal class III malocclusion that were performed to Le Fort I osteotomy and BSSRO. And 52 patients were divided to Group A(n=30) and B(n=22). Maxillary posterior impaction was not conducted in Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, and for Group B, which the pre-operative maxillary occlusal plane was low, the maxillary posterior impaction was conducted. The results were obtained as follows : 1. The relapse rate of Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, was relatively stable compared to Group B, which the pre-operative maxillary occlusal plane was low. 2. The relapse rate of each measurement of Group B, which had the maxillary occlusal plane altered during the operation, was somewhat high, and of those, the post-operative relapse rate of overjet, overbite, mandibular plane angle appeared to be significantly high in the statistics. The analyzed results above, was thought to be indicating that the pre-operative maxillary occlusal plane angle was closely related to the post-operative skeletal stability, and that obtaining post-operative skeletal stability only through operative normalization of occlusal plane angle may meet limitations.

• 대한치과보철학회지
• /
• 제30권4호
• /
• pp.575-581
• /
• 1992

It is a very important procedure to establish the occlusal plane in the construction of complete denture. So many methods have been utilized to establish the occlusal plane in complete denture prosthodontics. However, no single method seems to fully accepted. This study was aimed to review the literature on establishing the occlusal plane in complete denture prosthodontics, to measure the distance from the lower border of the upper lip to the upper incisal edge and to investigate the correlation between the ala-tragus line and the occlusal plane. The results ware as follows ; 1. The average distance between the lower border of the upper lip and the upper incisal edge was $1.45{\pm}1.28mm$. 2. The distance between the lower border of the upper lip and the upper incisal edge had a tendency to decrease with age. 3. A angle of the ala-tragus line to the occlusal plane measured with Fox plane was $-1.41{\pm}2.33^{\circ}$. 4. The ala-tragus line to occlusal plane was nearly parallel, cosidering curve of spee in the upper natural teeth.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.58-66
• /
• 2013

PURPOSE. The purpose of this study was to decide the most appropriate point on tragus to be used as a reference point at time of marking ala tragus line while establishing occlusal plane. MATERIALS AND METHODS. The data was collected in two groups of subjects: 1) Dentulous 2) Edentulous group having sample size of 30 for each group with equal gender distribution (15 males, 15 females each). Downs analysis was used for base value. Lateral cephalographs were taken for all selected subjects. Three points were marked on tragus as Superior (S), Middle (M), and Inferior (I) and were joined with ala (A) of the nose to form ala-tragus lines. The angle formed by each line (SA plane, MA plane, IA plane) with Frankfort Horizontal (FH) plane was measured by using custom made device and modified protractor in all dentulous and edentulous subjects. Also, in dentulous subjects angle between Frankfort Horizontal plane and natural occlusal plane was measured. The measurements obtained were subjected to the following statistical tests; descriptive analysis, Student's unpaired t-test and Pearson's correlation coefficient. RESULTS. The results demonstrated, the mean angle COO (cant of occlusal plane) as $9.76^{\circ}$, inferior point on tragus had given the mean angular value of IFH [Angle between IA plane (plane formed by joining inferior point-I on tragus and ala of nose- A) and FH plane) as $10.40^{\circ}$ and $10.56^{\circ}$ in dentulous and edentulous subjects respectively which was the closest value to the angle COO and was comparable with the values of angle COO value in Downs analysis. Angulations of ala-tragus line marked from inferior point with occlusal plane in dentulous subject had given the smallest value $2.46^{\circ}$ which showed that this ala-tragus line was nearly parallel to occlusal plane. CONCLUSION. The inferior point marked on tragus is the most appropriate point for marking ala-tragus line.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.53-65
• /
• 2022

Objective: Planning of incisal position is crucial for optimal orthodontic treatment outcomes due to its consequences on facial esthetics and occlusion. A systematic summary of the proposed parameters is presented. Methods: Studies on Google Scholar^©, PubMed^©, and Cochrane Library, providing quantitative information on optimal central incisor position were included. Results: Upper incisors supero-inferior position (4-5 mm to upper lip, 67-73 mm to axial plane through pupils), antero-posterior position (3-4 mm to Nasion-A, 3-6 mm to A-Pogonion, 9-12 mm to true vertical line, 5 mm to A-projection, 9-10 mm to coronal plane through pupils), bucco-lingual angulation (4-7° to occlusal plane perpendicular on models, 20-22° to Nasion-A, 57-58° to upper occlusal plane, 16-20° to coronal plane through pupils, 108-110° to anterior-posterior nasal spine), mesio-distal angulation (5° to occlusal plane perpendicular on models). Lower incisors supero-inferior position (41-48 mm to soft-tissue mandibular plane), antero-posterior position (3-4 mm to Nasion-B, 1-3 mm to A-Pogonion, 12-15 mm to true vertical line, 6-8 mm to coronal plane through pupils), bucco-lingual angulation (1-4° to occlusal plane perpendicular on models, 87-94° to mandibular plane, 68° to Frankfurt plane, 22-25° to Nasion-B, 105° to occlusal plane, 64° to lower occlusal plane, 21° to A-Pogonion), mesio-distal angulation (2° to occlusal plane perpendicular on models). Conclusions: Although these findings can provide clinical guideline, they derive from heterogeneous studies in terms of subject characteristics and reference methods. Therefore, the optimal incisal position remains debatable.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권4호
• /
• pp.239-244
• /
• 2003

The common errors in preoperative treatment plan for the orthognathic surgery can be occurred during cast impression, cast mounting procedure with face-bow transfer, surgical stent fabrication, and so on. One of the most common errors exists during mounting process of the model on the articulator. Accurate mounting of dental casts to articulator should be achieved by transferring the 3-dimensional spatial relationship of the maxillary arch to an articulator. A face-bow is used for transfer this relationship to articulator, usually by relating the face-bow to a plane of reference of maxillary cast. The purpose of this study is evaluation of the accuracy of face-bow transferring of maxillary model to the articulator. The maxillary casts of thirty patients for orthognathic surgery were mounted on articulator with an face-bow instrument. The relationship of occlusal plane angle to Frankfort horizontal plane relations were compared the cephalogram with the cast-mounted articulator. As a result of this study, the significant difference between the maxillary occlusal planes angle in the cephalogram and articulator were found. The results were followed, 1. The mean occlusal plane angle in cast-mounted articulator was $13.5^{\circ}\;(SD{\pm}5.4)$. 2. The mean occlusal plane angle in cephalogram was $10.4^{\circ}\;(SD{\pm}4.3)$. 3. The mean difference of occlusal plane angle between cast-mounted articulator and cephalogram was $3.3^{\circ}\;(SD{\pm}4.6)$. According to the result, we should suggest that the occlusal plane angle to Frankfort plane in cast-mounted articulator is more steeper than that of cephalogram. And then, maxillofacial surgeon should try to get a more predictable result by suggesting the proper correction method and mounting the cast accurately.