• 대한치과의사협회지
• /
• 제25권9호통권220호
• /
• pp.861-872
• /
• 1987

The Purpose of this study was to know the differences between the occlusal plane angles formed by F-H plane on cephalograms and the occlusal plane angles by the upper margin of the articulator, and to ind the contributing factors to the difference of occlusal angles. for this study, 39 young adults (20 men, 19 women) were selected who had normal occlusion, no severe attrition, no missing tooth, not been under orthodontic treatment and occlusal equilibration and no temporomandibular disorders. The maxillary casts were mounted with Hanau 159-1 ear piece type face-bow and measured the occlusal plane angle with prototype occlusal plane projector. The following results were obtained; 1. The mean value of the ear rod F-H plane occlusal angle was 14.75˚, articulator occlusal angle was 9.26˚ and strong positive correlation between these angles, 2. It was almost same angle between the ear rod F-H plane angle (14.75˚) and the beyron point to infraorbital rim-6mm. occlusal angle (14.46˚) 3. The mean distance from the ear rod porion to the Byron point was 5.67mm. 4. It was no significant correlation between the distances Po-Beyron point, Or-infraorbital rim and articulator occlusal angle.

• 대한치과보철학회지
• /
• 제27권2호
• /
• pp.271-277
• /
• 1989

The purpose of this preliminary report was to describe the operating procedure of T-scan system and to identify the location, timing and force of occlusal contact in patient with normal occlusion using computerized T-scan system. From the preliminary observation , the author obtained the following results. 1. T-scan system displayed 2 dimensional and 3 dimensional description of occlusion: contact locations, timing (sequence) and forces of occlusal contacts. 2. The T-scan sensor was the most important part of the T-scan system. 3. The data of T-scan system cannot be stored in computer diskett. 4. The T-scan system is thought to be the most effective system to detect occlusal contacts and can be applied to the followings : occlusal diagnosis, occlusal equilibration, crown and bridge restorative procedures, denture adjustment, implant procedures, splint adjustment, laboratory procedures, periodontal treatment, orthodontics, TMJ treatment and patient education etc.

• 구강회복응용과학지
• /
• 제19권1호
• /
• pp.49-55
• /
• 2003

When treating the occlusion the dentist must ensure that patients do not develop an occlusal awareness or neurosis after therapy. This means that after treatment patients should not be conscious of the dentition at rest, in occlusion, or during function. Butactually this goal is not easy to reach in daily practice. The dental technician works with rigid casts and dies that do not move. The dentist must use fixed prostheses that have been made in a laboratory setting in a clinical environment that is significantly different. In this article relativey easy cast adjustment technique which can decrease the time necessary to clinically adjust the occlusion of newly fabricated fixed prostheses, and actual occlusal equilibration technique for natural and restored dentition will be discussed.

• 대한치과의사협회지
• /
• 제16권9호통권112호
• /
• pp.689-693
• /
• 1978

A girl (Hellman dental age IIC) with anterior cross bite was treated by means of the chincap and occlusal equilibration on deciduous canines. Following results were obtained; 1) The cross bite was corrected after 12 weeks of active treatment. 2) The terminal plane of deciduous molars had become 'a class II tendency' 3) The axial inclination of lower incisors were changed significantly.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.388-395
• /
• 2013

PURPOSE. The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS AND METHODS. This study included 20 male subjects to perform the isokinetic muscle tests and the Wingate anaerobic power test on both knee joints under five closed-mouth conditions: without or with 4 types of mouthguards with thickness of 2 mm based on premolar area: (1) full-coverage, (2) anterior partial-coverage, (3) right posterior partial-coverage, and (4) left posterior partial-coverage. The obtained results were subjected to One-way ANOVA with repeated measures, followed by post hoc test of the contrast method (${\alpha}$=.05). RESULTS. There was no significant difference between the closed position with and without a full-coverage mouthguard in all variables. However, significant differences were observed between with and without a partial-coverage mouthguard in muscular endurance during extension of the left knee, muscular power and endurance during flexion of the right knee. Additionally, significant differences were found between occlusal states with full- and partial-coverage mouthguards in muscular power and endurance during extension of the left knee. CONCLUSION. These findings indicate the elevation of vertical dimension by 2 mm or the inducement of occlusal stability had little effect on isokinetic muscle strength and anaerobic performance, while uneven distribution of occlusal force might have some positive effects.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.17-22
• /
• 1984

A clinical evaluation was made on teeth in 113 subjects from ages 19 to 23 with Angle's Class I occlusion who were free from prosthesis, orthodontics, and occlusal equilibration. The study was made to determine if there was a relation between the type of occlusion, non-working contact and temporomandibular dysfunction. From the foregoing study, the author obtained the following results. 1. In lateral excursion, there was not any significant difference between bilateral canine protected occlusion (31%), bilateral group function (32.7%), and mixed type (34.5%). 2. Only 10 of 113 subjects studied had non-working side tooth contacts (8.2 per cent). 3. Twenty per cent of subjects with non-working side contact showed temporomandibular joint dysfunction. 4. Non-working side contacts were not observed in subjects with canine guided occlusion. 5. It would be premature to relate the type of occlusion on working side directly to temporomandibular joint dysfunction.

• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.869-880
• /
• 1992

The purpose of this study was to evaluate the difference and relationship between the slope of articular eminence and the inclination of upper and lower incisor teeth, which are related to the functional stability of occlusion in mandibular protrusion, according to Ricketts' facial types, by the use of lateral cephalogram and SAM2 articulator in 68-adult normal occlusion without tooth missing, orthodontic treatment and occlusal equilibration. The results of this study were as follows : 1 . The angle of articular eminence slope to occlusal plane in brachyfacial type was steeper than that in dolichofacial type, but the angle of articular eminence slope to SN plane and FH plane was not different between facial types. 2. The upper incisor axis in dolichofacial type was steeper than that in brachyfacial type, but lingual surface slope of upper incisor was not different between facial types. 3. In all samples there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane, FH plane and occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to occlusal plane. 4. In all samples there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane and FH plane. 5. In all samples there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane. 6. In all samples and facial types there was a negative correlation between MP to 1 axis and condylar incisal angle.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.35-46
• /
• 1979

A number of experimental studies have been carried out in order to clarify the question as to how temporomandibular joint adapt to the changes of mandibular movement and occlusal equilibration. Recently, the studies on the interrelations between anatomical structure of temporomandibular joint and the state of occlusion have been actively performed in dentistry particularly in prosthodontic field. Author performed extraction of unilateral mandibular molars in 30 mature male rats, and observed histological changes of temporomandibular joint through the light microscope. Following results were obtained. 1. The loss of unilateral teeth gave rise to the changes in the location of condylar head, that is, interior displacement of condylar head in the extraction side and upper displacement in the non-extraction side. 2. Articular disk was compressed by the interior surface of condylar head, resulting in its extension below the condylar neck in the extraction side, and the histological arrangement of the compressed area showed irregular feature. 3. The extension of articular disk below the condylar neck was accompanied with the contraction of muscle fibers which were originated from the articular disk. 4. The cartilage layer of articular fossa to the exterior of the extraction side showed hypertropy. 5. Early in the experiment, the inernal extremity of condylar head of extract ion side showed bone resorption, and cartilage layer of condylar head showed hypertropy. At 12 weeks after experiment, the condylar surface showed flattened, and the cartilage layer of condylar head was replaced by the compact bone. 6. The articular disk showed the formation of pannus in the extraction side as well as in the non-extraction side. 7. The occlusal disturbance due to unilateral missing teeth has brought about the non-inflammatory retrogressive change and osteoarthrotic change late in the experiment.

• 구강회복응용과학지
• /
• 제28권3호
• /
• pp.309-318
• /
• 2012

치주질환이 중증도 이상으로 진행되면 대개 많은 량의 치주조직지지가 상실된다. 일부 치아 주변으로 발생되는 이러한 조직 파괴는 그들의 심한 동요 때문에 일부 치아들은 스스로 탈락되거나 발치가 요구되는 단계까지 진행된다. 이러한 경우에 적절한 치주치료와 유지 그리고 교합평형을 고려한 치주-보철 치료를 포함하는 포괄적 치료계획이 그들의 건강, 기능, 심미 등의 수복을 위해 필요하게 되고, 이러한 치주-보철치료 중의 하나인 크로스-아치 고정성국소의치(cross-arch fixed partial dentures, CAFPDs)가 심하게 감소된 치주조직지지를 갖는 치아들의 안정을 위해 사용될 수 있다. 그러나 불행하게 이러한 보철물의 디자인에 따른 생역학적 개념과 교합양식에 대해 아직 많이 알려져 있지 않은 상태이다. 본 논고에서는 교합성외상 그리고 CAFPDs를 통해서 본 Ante's law의 재조명, 치료 원칙, 교합부여, 장기적 예후 등에 대한 정리를 보여줄 것이며 증례를 통해 그 가능성을 제시해 보고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권2호
• /
• pp.81-91
• /
• 1993

Arthrosis of the temporomandibular joint is defined as a disease of a joint with chief complaint of pain, clicking, limited jaw movements. Generally, most patients with the temporomandibular arthrosis can be treated conservatively with muscle relaxation therapy combined with mandibular repositioning prostheses, followed by occlusal equilibration, restorative dentistry and/or orthodontics, and many other forms of treatment. In case prior nonsurgical treatment proved to be ineffective or the disease is chronic and severe, surgical operation is recommended. For patients with arthrosis of the temporomandibular joint, only discectomy as therapeutic method of the surgical treatment should not be applied and the removed articular disc of the temporomandibular joint should be replaced. Allograft such as Proplast-Teflon, Silastic, etc have been used as replacements of removed articular disc. However, these allograft materials have caused complications such as inflammatory changes, foreign body reactions. As a result, a replacement material which is autogenous, space occupying, easy to harvest and less inflammatory change has been developed. Auricular cartilage with perichondrium satisfies many of these requirements. The apparent advantages of autogenous auricular cartilage as an interpositional graft after a discectomy are as follows, (1) the form of the external ear corresponds to joint morphology, (2) a graft of adequate size can be harvested, (3) the form of the external ear remains unchanged after surgery, (4) the graft can be obtained adjacent to the surgical site, (5) biologically acceptable material is used, (6) the additional expense of allogenic graft is avoided. Because we considered autogenous auricular cartilage as a good replacement material, removed articular disc has been replaced with fresh autogenous auricular cartilage in the case of three patients. The result of the treatment is favorable, and the cases being presented here.