• The Journal of Advanced Prosthodontics
• /
• v.4 no.1
• /
• pp.7-12
• /
• 2012

PURPOSE. Articulation paper mark size is widely accepted as an indicator of forceful tooth contacts. However, mark size is indicative of contact location and surface area only, and does not quantify occlusal force. The purpose of this study is to determine if a relationship exists between the size of paper marks and the percentage of force applied to the same tooth. MATERIALS AND METHODS. Thirty dentate female subjects intercuspated into articulation paper strips to mark occlusal contacts on their maxillary posterior teeth, followed by taking photographs. Then each subject made a multi-bite digital occlusal force percentage recording. The surface area of the largest and darkest articulation paper mark (n = 240 marks) in each quadrant (n = 60 quadrants) was calculated in photographic pixels, and compared with the force percentage present on the same tooth. RESULTS. Regression analysis shows a bi-variant fit of force % on tooth (P<.05). The correlation coefficient between the mark area and the percentage of force indicated a low positive correlation. The coefficient of determination showed a low causative relationship between mark area and force ($r^2$ = 0.067). The largest paper mark in each quadrant was matched with the most forceful tooth in that same quadrant only 38.3% of time. Only 6 2/3% of mark surface area could be explained by applied occlusal force, while most of the mark area results from other factors unrelated to the applied occlusal force. CONCLUSION. The findings of this study indicate that size of articulation paper mark is an unreliable indicator of applied occlusal force, to guide treatment occlusal adjustments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.769-779
• /
• 1995

The understanding the nature of occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have repored contact locations with respect to the tooth position. However, there are few report the variation of the occlusal contact point with change in each head position. This study analysed the number of occlusal contact point with change in each head position. 30 subject(male 17, female 13), who ahad natural occlusion and no symptoms of temporomandibular disorder, were selected. The numbers and patterns of tooth contact were recorded by silicone bite registration on stone model at four different head positions with head anguration gauge(from the supine to the upright position). The results obtained were as follows : 1. The numbers of total occlusal contact point on teeth increased to average 25, 29, 35, 42 points as head angulation was changed from the supine to the upright position against the ala-tragus line, and there was significant difference(P<0.05). 2. In the 19 subject(65%)of total 30 subject, the perforated point of the silicone bite indicated that the locus for the prime contact point moved mesially as the head angulation was changed from the supine to the upright position. 3. On the basis of the fact that the anterior occlusal contact point increase as head angulation changed from the supine to the upright position, we could find that the mandibular position is moved anteriorly.

• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.89-101
• /
• 1996

This study was performed to investigate influence of the changes of head posture on resting electromyographic (EMG) activity in anterior temporalis, masseter, sternocleidomastoid muscle and trapezius, and on status of occlusal contacts. For this study twenty-nine patients with temporomandibular disorders(TMD) and thirty dental students without any masticatory symptoms were selected as patients group and control group, respectively. EMG activity($\mu$V) at rest was observed in four kind of head postures such as natural or normal head posture(NHP), forward head posture(FHP), upward head posture(UHP), downward head posture(DHP), and in NHP and FHP, EMG activity with flat occlusal splint was also checked. BioEMG$^\textregistered$(Bioelectromyograph, Bioresearch Inc., USA) was used to record EMG activity in the above four muscles with eight locations on both sides. The author used T-Scan$^\textregistered$(Tekscan Co., USA) system to investigate the changes of oclusal contats on clenching in the four head postures about number, force, time(duration) and total left-right statistis(TLR, occlusal stability crossing left-right dental arch on clenching). For taking in upward or downward head posture, head was inclined $10^{\circ}$ upward or downward and CROM$^\textregistered$ (cervical-range-of motion, Performance attainment Inc., USA) was used to maintain same posture during the procedure. The results obtained were as follows : 1. For resting EMG activity, anterior temporalis did not show any difference by change of head posture, but masseter and sternocleidomastoid muscle showed higher value of EMG activity in FHP and UHP, and trapezius showed higher value of EMG activity in FHP and DHP. 2. EMG activity of trapezius was higher than that of any other muscles in NHP, FHP, and DHP, but in UHP, the activity was the lowest reversely. 3. Patients group showed higher EMG activity than control group did in all the muscles in NHP. And significant difference between the two groups were also observed in anterior temporalis in FHP, in sternocleidomastoid muscle in UHP, and in sterno-cleidomastoid muscle and trapezius in DHP with higher activity in patients group. 4. There was no change of EMG activity in NHp with splint, but EMG activity in anterior temporalis and masseter was decreased in FHP with splint. 5. In general, status of occlusal contacts was not changed with head posture in all subjects, and difference between patients group and control group was only noted for number and force of tooth contact in UHP and DHP with more value in control group. 6. Correlationship between EMG activity and number ad force of tooth contacts was shown negatively with regard to masseter in NHP, and trapezius in UHP and DHP.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.3
• /
• pp.170-173
• /
• 2012

Correct occlusal relationships are part of the successful prosthetic treatment for edentulous patients. Fabrication of complete dentures comprises of clinical and laboratory procedures that should be executed accurately for achieving success with fabricated dentures. Errors occurring during the clinical and laboratory procedures of a denture may subsequently lead to the occlusal errors in the final prosthesis. These occlusal errors can be corrected in two ways: i) in patient's mouth ii) by recording new centric relation and remounting dentures on an articulator. The latter method is more feasible because the mobility of denture base on the mucosa in oral cavity does not permit the identification of premature contacts in centric occlusion and tooth guided eccentric excursions. This article describes a modest and effective clinical chair-side remount procedure using customized mounting platforms.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.246-251
• /
• 2014

In case of prosthesis fabrication by CAD/CAM, location, area and contour of occlusal contacts can be adjusted so more functional occlusion can be acquired. Also, errors in a manufacturing process is reduced compared to cast metal prostheses and porcelain fused metal prostheses fabricated by conventional methods such as casting and porcelain build up. Therefore, prostheses by CAD/CAM show superior occlusion accuracy. Recently, virtual articulator function has been introduced to CAD/CAM system, which reproduces mandibular movement against maxilla. Thus, it is possible to consider occlusal interference in anterior/lateral movement as well as closing movement. There have been many studies on the marginal and internal fit of prostheses using zirconia but the occlusal fit of zirconia crown fabricated by CAD/CAM has not been researched as much. In this case report, 7 zirconia crowns were designed and fabricated by CAD/CAM for total 5 patients. The models of zirconia crowns before and after occlusal adjustment during intraoral try-in were scanned for occlusal contacts, which were compared to evaluate accuracy of prostheses and understand patterns of occlusal adjustment. Most of the occlusal adjustments were done on functional cusps and slopes of zirconia crown, and the magnitude of occlusal adjustment ranged from $15{\mu}m$ to $60{\mu}m$. In the zirconia crown fabricated with CAD/CAM systems, the occlusal adjustment is a necessary procedure, so additional procedures will be needed for compensating reduced mechanical properties.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.11-19
• /
• 2007

There are have been reports that the distribution of electromyographical(EMG) activity is determined in a predictable manner by both the location and number of occlusal contacts. However, these reports placed an emphasis on whole dentition. Inclined plane contacts in the frontal plane are classified as A-, B- or C-types. Objectives: The aim of this study was to evaluate the relation between occlusal tooth contact patterns and EMG activity of masseter muscle during maximum voluntary clenching. Methods: Fifteen healthy human subjects(Mean age; 25.3 years) volunteered to participate in this study. Acrylic resin overlays were fabricated for upper 2nd premolars and 1st molars bilaterally, and offered 3 types(A-, B- and AB- type contact). EMG activity of the masseter muscles was recorded bilaterally during maximum voluntary clenching. Statistical analysis was performed using the one-way ANOVA. Results: The group with a A-type contact showed a statistically lower EMG activity of masseter muscle than that of natural group(p<0.05) and that of B- and AB- type groups(p<0.01) on both upper 2nd premolars and upper 1st molars. Conclusions: These results suggest that occlusal tooth contact patterns have an influence on EMG activity of masseter muscle during maximum voluntary clenching.

• The Journal of the Korean dental association
• /
• v.17 no.11 s.126
• /
• pp.849-853
• /
• 1979

The number of occlusal contact points and he occlusal relation were investigated in dental students who were selected on the basis of normal occlusion and normal function of stomatognathic system. Silicone-Black Bites obtained from fifty subjects were analyzed on their white models and occlusal contacts were traced on models directly. The results were as follows; 1. There was no evident difference in the number of occlusal contact points between right and left sides 2. In the retruded position the numbers of occlusal contact points were $5.96{\pm}3.35$ in the upper jaws and $6.12{\pm}3.52$ in the lower jaws. 3. In the retruded position no occlusal contact point was found on the central and lateral incisors of upper and lower jaws. 4. Occlusal contact points were found almost on second molars of upper and lower jaws in the retruded position.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.37-41
• /
• 1968

The purpose of this paper is to evaluate the number of occlusal contacts in centric occlusion. The 50 strictly selected subjects, who have good natural dentition and occlusion, were impressioned with Alginate Impression material, and dental stone models were madel. After transfering the models from mouth to Hanau Articulator Model H2 by means of SM type Face-Bow, condylar guidances were registered, red articulating papers($13{\mu}$ in thickness) were inserted between upper and lower posterior teeth, and the red marked points and lines were counted as occlusal contact points. 1. The number of occlusal contact points in centric occlusion were 1st Molars 2nd Molars, 2nd Premolars and 1st Premolars in order. 2. The number of occlusal contact points of right side showed comparatively much more than those of left side. 3. The number of occlusal contact points of upper in Premolar area were much more than those of lower, and in Molar area were the reverse. 4. The total number of occlusal contact points in centric occlusion were approximately 105 points.

• The Journal of the Korean dental association
• /
• v.51 no.5
• /
• pp.242-249
• /
• 2013

The proper occlusal design is one of the most important factors for the long-term success. The purpose of this research is to investigate and define occlusal considerations to reduce failure of implant-supported fixed prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occulsal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success can be assured by reducing early occulsal loading to avoid implant overloading and selecting appropriate occlusion material.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.143-150
• /
• 2004

Endosseous implants have been used to provide anchorage control in orthodontic treatment without the need for special patient cooperation. However these implants have limitation like space requirement, cost, equipments. Recently titanium micro-implant for orthodontic anchorage was introduced. Micro-implants are small enough to place in any area of the alveolar bone, easy to implant and remove, and inexpensive. In addition, orthodontic force application can begin almost immediately after implantation. The mandibular first, maxillary first, mandibula second, and maxillary second molars were the four most commonly missing teeth in adult sample. In case of posterior molar teeth missing, deflective contacts in any position, over time, has produced pathologic change of occlusal scheme because of extrusion of opposing teeth. This case had interocclusal space deficiency by mandibular right molars missing over time. The micro-implants had been used for intrusion of maxillary right molars for interocclusal space. The micro-implant would be absolute anchorage for orthodontic movement. Therefore, the micro-implant would be effective method for correction of occlusal plane.