• Journal of Oral Medicine and Pain
• /
• 제19권2호
• /
• pp.153-168
• /
• 1994

The aim of the present study was to investigate a relation between occlusal wear area and occlusal contact patterns. For the purpose, occlusal wear area were measured in 58 dental students and in 129 patients with temporomandibular disorders(TMDs) from dental casts. Teeth used in this study were from canine to second molar on both sides in upper arch, totally ten. Occlusal wear area on casts was marked by pencil and photocopies, and then, the area was measured with planimeter. Occlusal relation was clinically examined with regard to Angle's classification, chewing side preference, lateral guidance pattern and bruxing and/or clenching habit. T-Scan, electronic occlusal contact analyzer, was used to record occlusal contact number, contact force, contact time and occlusal balance that is TLR(total left-right statistics) during tooth contact. All measurement were repeated 3 times and the average value was used for data processing. The obtained results were as follows : 1. Mean value of occlusal wear area did not differ significantly between dental students and patients. 2. There ws not significant difference in wear area between chewing side and non-chewing side in both groups. 3. Occlusal wear area was significantly increased with age in both groups. 4. Three subgroups divided by Angle's classification did not show any difference in occlusal wear area among them, but three subgroups divided by lateral guidance pattern showed slightly significant difference between canine guide subgroup and group function subgroup in patients. Occlusal wear ares\a in group function subgroup wear larger than canine guide subgroup. 5. Mean value of wear area in patients with bruxing and/or clenching habit did not differ from those in patients without such habit. 6. Correlationship among items related to occlusal contact pattern were highly consistent and significant in dental students and only one item significantly correlated with occlusal wear area was tooth contact time.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.302-322
• /
• 1998

This study was accompolished to analyze and compare the number and area of the occlusal contact points in healthy volunteers and athletes with normal occlusion. For this study, 15 athletes(13 amles and 2 females with average age 20) and 21 healthy volunteers(14 mles and 7 females with average age 20.09) were selected. The visual display acquired by scanning of occlusal record in maximal intercuspation was converted into 16 gray value image. Then, using computer program(J & Lee Occlusal Analyser), the pixel which was in definite range of the gray value was recognized, and the numbers of recognized pixel were calculated to area. The results were as follows ; 1. The average numbers of total occlusal contact feints were 31.05 in control group, and 34.67 in athlete group. The average area of total occlusal contacts was $100.25mm^2$ in control group, and $127.78mm^2$ in athlete group. 2. In control group, the average numbers of occlusal contact points were revealed in order as follows ; the first molar(8.48), the second molar(8.24), the second premolar(4.71), the lateral incisor(2.90), the first premor(2.43), the central incisor(2.19), and the canine(2.1). The least average in canine(2.1) was similar to the average(2.19) in central incisor and (2.09) in lateral incisor. In athlete group, the average numbers of occlusal contact points were revealed in order as follows ; the first molar(8.97), the second molar(8.47), the second premolar(5.60), the canine(3.80), the lateral incisor(3.33), the first premolar(2.67), and the central incisor(1.93). 3. In control group, the average areas of occlusal contact surface were revealed in order as follows ; the first molar($39.47mm^3$), the second molar($37.54mm^3$), the second premolar($9.54mm^3$) the first premolar($6.18mm^3$), canine($3.49mm^3$), the central incisor($2.76mm^3$), and the lateral incisor($1.28mm^3$). In athlete group, the average areas of occlusal contact surface were revealed in order as follows ; the first molar($44.11mm^3$), the second molar($40.69mm^3$), the second premolar($16.50mm^3$), the first premolar($9.39mm^3$), the canine($5.08mm^3$), the lateral incisor($3.7mm^3$), and the central incisor($2.25mm^3$). 4. With aging in both control and athlete group, there was a decreasing tendancy in average number of occlusal contact point, and was an increasing tendancy in average area of occlusal contact surface. In comparison at each age, both the numbers and area of occlusal contact were greater in athlete group than in control group. It was not significant in the numbers of occlusal contact points beween athlete and control group(p>0.1), but significant in the area of occlusal contact surface(p<0.03). 5. In comparision as to the kind of sports(Gymnastics : 2, Rugby : 3, Soccor : 5, Ice hocky : 5), the numbers of occlusal contact points were the most in ice hocky, and the area of occlusal contact surface was the greatest in gymnastics. With increasing a career in athlete group, there was a decreasing tendancy in average numbers of occlusal contact points and was an increasing tendancy in average area of occlusal contact surface. 6. By T-scan analyzing, the contact numbers on the anterior teeth were greater in control group than in athlete group, and on the posterior teeth were greater in athlete group than in control group. And the results acquired by T-scan were lesser than that caquired by the silicone bite records. It was not significant in the posterior teeth, but significant in the anterior teeth. In T-scan records, the numbers of occlusal contact points on second molar were the greatest, but in the silicone records, the numbers on first molar were the greatest.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.235-249
• /
• 2002

This study was accompolished to analyze and compare the number and area of the occlusal contact points in healthy volunteers and athletes with normal occlusion. Before the study, 89 athletes(sports career:8.6 years, average age 20) at Kyung Hee University were selected, and survey was accomplished for athlete's recognition about sports dentistry. For this study, 15 athletes(13 amles and 2 females with average age 20) and 21 healthy volunteers(14 mles and 7 females with average age 20.09) at Kyung Hee University were selected. The visual display acquired by scanning of occlusal record in maximal intercuspation was converted into 16 gray value image. Then, using computer program(J & Lee Occlusal Analyser), the pixel which was in definite range of the gray value was recognized, and the numbers of recognized pixel were calculated to area. The results were as follows : (1) On the survey about sports dentistry, 28% of 89 athletes didn't agree that human occlusion may be important, and 30% didn't have any idea of the influence of human occlusion during their sports activities. (2) The average numbers of total occlusal contact points were 31.05 in control group, and 34.67 in athlete group. The average area of total occlusal contacts was $100.25mm^2$ in control group, and $127.78mm^2$ in athlete group. (3) In control group, the average numbers of occlusal contact points were revealed in order as follows; the first molar(8.48), the second molar(8.24), the second premolar(4.71), the lateral incisor(2.90), the first premor(2.43), the central incisor(2.19), and the canine(2.1). The least average in canine(2.1) was similar to the average(2.19) in central incisor and (2.09) in lateral incisor. In athlete group, the average numbers of occlusal contact points were revealed in order as follows; the first molar(8.87), the second molar(8.47), the second premolar(5.60), the canine(3.80), the lateral incisor(3.33), the first premolar(2.67), and the central incisor(1.93). (4) In control group, the average areas of occlusal contact surface were revealed in order as follows; the first molar($39.47mm^3$), the second molar($37.54mm^3$), the second premolar($9.54mm^3$) the first premolar($6.18mm^3$), canine($3.49mm^3$), the central incisor($2.76mm^3$), and the lateral incisor($1.28mm^3$). In athlete group, the average areas of occlusal contact surface were revealed in order as follows; the first molar($44.11mm^3$), the second molar($40.69mm^3$), the second premolar($16.50mm^3$), the first premolar($9.39mm^3$), the canine($5.08mm^3$), the lateral incisor($3.7mm^3$), and the central incisor($2.25mm^3$). (5). With aging in both control and athlete group, there was a decreasing tendancy in average number of occlusal contact point, and was an increasing tendancy in average area of occlusal contact surface. In comparison at each age, both the numbers and area of occlusal contact were greater in athlete group than in control group. It was not significant in the numbers of occlusal contact points beween athlete and control group(p>0.1), but significant in the area of occlusal contact surface(p<0.05). (6) In comparision as to the kind of sports(Gymnastics:2, Rugby:3, Soccor:5, Ice hocky:5), the numbers of occlusal contact points were the most in ice hocky, and the area of occlusal contact surface was the greatest in gymnastics. With increasing a career in athlete group, there was a decreasing tendancy in average numbers of occlusal contact points, and was an increasing tendancy in average area of occlusal contact surface.

• 구강회복응용과학지
• /
• 제35권2호
• /
• pp.90-97
• /
• 2019

목적: 교합접촉면적에 관련된 이전의 연구들은 교합두께 수준이나 교합측정방법 상 부정확성이 한계로 지적되어 왔다. 본 연구의 목적은 머리 위치가 교합접촉면적에 미치는 영향을 광조사교합분석법을 이용하여 조사하는 것이다. 연구 재료 및 방법: 건전한 치열을 갖는 54명(남성 44명, 여성 10명, 23 - 33세)을 대상으로 시험을 진행하였다. 머리 위치와 교합접촉면적의 관계를 알아보기 위해 시험대상은 치과용 유닛체어에 세 가지 자세(누운 자세($0^{\circ}$), 기울인 자세($45^{\circ}$), 직립 자세($90^{\circ}$))로 하여 최대 교두간 접촉위를 이용하여 악간관계기록을 채득하였다. 광조사교합분석기($BiteEye^{(R)}$)를 이용하여 교합접촉면적을 분석하였다. SPSS 25.0을 이용하여 유의수준 95%에서 통계분석을 시행하였다. 결과:머리 위치는 교합접촉면적과 유의미한 영향이 없는 것으로 나타났다(P > 0.05). 결론: 머리 위치는 교합접촉면적에 유의미한 영향이 없으므로 교합관계가 안정적이라면 최대 교두간접촉위의 악간관계 기록 채득 시 환자의 자세는 변수가 되지 않으며 광조사교합분석기를 이용한 교합접촉면적의 측정은 재료적, 용이성 측면으로 유용하다고 할 수 있다.

• 구강회복응용과학지
• /
• 제29권1호
• /
• pp.45-58
• /
• 2013

교합접촉 분석에 이용되는 T-Scan $III^{(R)}$ (Tekscan, South Boston, MA, USA)의 정확도 및 신뢰도를 Add picture 방법을 통해 평가하였다. 두 방법에서 공통적인 교합접촉점의 분포 및 교합접촉면적을 비교하여 교합진단 및 조정 술식에서 T-Scan 방법의 적용 시 고려점을 밝히고자 하였다. Angle I급 교합관계, 정상치열자 한 사람의 구강을 대상으로 부가중합형 실리콘인상재를 이용하여 상하악치열궁을 10회 인상채득하였으며, 10쌍의 초경석고 모형을 제작하였다. 자체제작한 하중장치에 모형을 자석과 경석고를 이용하여 부착한 후 최대감합위와 최대교합력을 재현하기 위해 78.9kg의 하중을 가하였다. T-Scan 측정 시에는 상하악 모형과 T-Scan 센서의 위치가 변하지 않는 상태에서 2번 반복 측정하였다. Add Picture의 경우 상하악모형을 동일한 하중을 가하여 최대감합위에서 폴리이써 교합인기재를 이용하여 교합을 인기하였다. 교합접촉 양상은 접촉점 수와 총 교합면적에 대한 접촉면적 백분율을 측정하여 비교하였다. T-Scan 방법은 포토샵 프로그램 상에서 픽셀수를 계산하여 색상에 따른 면적을, Add picture 방법은 빛 투과 정도에 따라 인상재 두께를 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$의 3가지로 나누고, 이에 따른 면적을 실측하여 계산하였다. 총 교합면면적은 접촉면을 표시한 모형의 촬영상에서 픽셀수를 계산하여 함께 촬영된 격자를 기준으로 제곱미터값으로 변환하였다. 대응표본 t-검정을 이용하여 통계분석하였다. T-Scan 방법에서 분홍색상 및 붉은 색상으로 표시된 면적의 일부가 Add picture 방법에서 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$의 상하악 치아 간 거리에 해당하는 면적에 상응하였다. 교합접촉점 분포 비교 시 T-Scan 방법과 Add picture 방법은 유사하였다. 교합접촉면적 비교 시 T-Scan 방법에서 확대된 결과가 관찰되었으며, 전체교합면적에 대한 접촉면적 백분율 비교에서도 T-Scan 방법과 Add picture 방법의 백분율값은 유의한 차이를 보였다(P<.05). T-Scan에서 분홍색상 및 붉은 색상으로 표시된 부위의 면적값은 Add picture의 $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ 부위의 면적값보다 크고(P<.05), $0{\sim}60{\mu}m$ 부위와는 유사한 값을 보였다(P>.05). T-Scan에서의 교합접촉상은 실제보다 확대되어 나타났으며, 따라서 교합접촉에 대한 진단 및 조정 술식에서 보조적인 수단으로 활용하는 것이 추천된다.

• 대한치과보철학회지
• /
• 제8권1호
• /
• pp.37-41
• /
• 1968

The purpose of this paper is to evaluate the number of occlusal contacts in centric occlusion. The 50 strictly selected subjects, who have good natural dentition and occlusion, were impressioned with Alginate Impression material, and dental stone models were madel. After transfering the models from mouth to Hanau Articulator Model H2 by means of SM type Face-Bow, condylar guidances were registered, red articulating papers($13{\mu}$ in thickness) were inserted between upper and lower posterior teeth, and the red marked points and lines were counted as occlusal contact points. 1. The number of occlusal contact points in centric occlusion were 1st Molars 2nd Molars, 2nd Premolars and 1st Premolars in order. 2. The number of occlusal contact points of right side showed comparatively much more than those of left side. 3. The number of occlusal contact points of upper in Premolar area were much more than those of lower, and in Molar area were the reverse. 4. The total number of occlusal contact points in centric occlusion were approximately 105 points.

• 대한치과교정학회지
• /
• 제47권3호
• /
• pp.151-157
• /
• 2017

Objective: The objective of this study was to investigate the differences in masticatory efficiency among patients with different Angle's classes of malocclusion and to assess the correlation between masticatory efficiency and the occlusal contact area. Methods: The mixing ability index (MAI) was calculated for measuring masticatory efficiency of 61 adult patients according to Angle's classifications of malocclusion. The study included 25, 15, and 21 patients with Angle's Class I, II, and III malocclusions, respectively. Silicone interocclusal recording material was used to measure the occlusal contact area. Results: Both the MAI and occlusal contact area showed the highest average values in the Class I malocclusion group, followed by the Class II and Class III malocclusion groups. No significant difference was observed in the MAI values between the Class I and Class II malocclusion groups (p > 0.05), whereas a significant difference was observed between the Class I and Class III malocclusion groups (p < 0.01) and between the Class II and Class III malocclusion groups (p < 0.05). A weak positive correlation was also observed between the MAI and occlusal contact area (p < 0.01, $r^2=0.13$). Conclusions: The results of this study indicated that masticatory efficiency was the highest in patients with Angle's Class I malocclusion, followed by those with Angle's Class II and Angle's Class III malocclusions. Moreover, a weak positive correlation was observed between masticatory efficiency and the occlusal contact area.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.98-107
• /
• 2020

Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.256-261
• /
• 2013

PURPOSE. Occlusal splints are commonly used to prevent tooth wear caused by bruxism. However, the effects of splints on occlusion are still unclear. Although it is rarely alluded in literature, splints can provoke severe occlusal alterations and other complications. This study was aimed to identify differences in the responses of individuals with bruxism and healthy individuals to a full-arch maxillary stabilization splint in terms of occlusal changes. MATERIALS AND METHODS. Occlusal contacts in 20 (5 male, 15 female) bruxism patients and 20 (5 male, 15 female) controls with normal occlusion were evaluated before and after occlusal splint therapy. T-Scan III, a computerized occlusal analysis system, was used to simultaneously measure occlusion and disclusion times as well as left-right and anterior-posterior contact distributions before splint therapy and 3 months after therapy. Wilcoxon and Mann-Whitney U tests were used for statistical analyses (${\alpha}$=.05). RESULTS. No differences were found in the posterior contact of bruxism patients before and after stabilization splint treatment. However, differences in posterior contact were observed between bruxists and normal individuals prior to treatment, and this difference disappeared following treatment. CONCLUSION. The results of this study showed the use of a stabilization splint may not have an effect on occlusion. However, the area of posterior occlusal contact among bruxists was found to be greater than that of normal individuals. According to this study, the clinical use of splints may be harmless.

• 구강회복응용과학지
• /
• 제38권4호
• /
• pp.204-212
• /
• 2022

목적: 수면이갈이 환자에서 한달 간 수면 시 교합안정장치를 장착하였을 때 교합력과 교합 접촉 면적 및 동기능적교합분석의 변화량을 비교하고자 하였다. 연구 재료 및 방법: 2021년 10월부터 2022년 7월까지 연세대학교 치과대학병원 구강내과 외래에 방문한 수면이갈이 환자 30명 중 교합안정장치를 수면 중 착용하는 실험군(treatment; n = 15)과 교합안정장치를 착용하지 않는 대조군(control; n = 15)으로 구성하였다. 교합안정장치 장착 전, 장착 1개월 후에 교합력 검사와 동기능적교합분석(측방, 전후방 하악 운동 시 좌/우 힘의 균형, 평균 교합력, 최대 교합력, 최대 접촉 개수)을 진행하였다. 결과: 한달 간 수면 중 교합안정장치를 착용하는 실험군과 교합안정장치를 착용하지 않는 대조군에서 교합력과 교합 접촉 면적은 차이가 없었으나 측방 및 전후방 운동에서 평균 교합력과 최대 교합력, 전후방 운동에서 최대 접촉 개수가 유의한 차이가 있었음을 관찰하였다. 결론: 교합안정장치가 측방, 전후방 운동을 하는 이갈이 환자에게 도움이 될 것으로 사료되며, 향후 추가적으로 대단위 집단을 대상으로 하는 이중 맹검연구가 필요할 것으로 사료된다.