• 조명전기설비학회논문지
• /
• 제13권4호
• /
• pp.32-37
• /
• 1999

본 연구에서는 연소공정에서 발생하는 NOx를 제거하기 위해 연면방전과 AC Corona 방전을 중첩해서 특수설계 제작된 중첩방전 반응기의 방전분해 특성을 연구하였다. 실험은 SPCP, Corona Discharge 및 중첩방전에 대한 NOx의 분해율을 비교 측정하였다. 실험변수는 방전형태, 가스의 농도, 방전주파수, 가스의 유량 등에 대하여 측정하였다. 실험결과 중첩방전에 의한 NOx의 분해율은 SPCP방전고 Corona방전에 의한 분해율보다 10∼15[%] 증가하였고 소모전력도 10[%] 정도 작게 소모되었다. 중첩방전시 상부전극의 주파수의 영향은 주파수가 작을수록 NOx의 분해율이 높았고 하부전극의 SPCP만의 방전시에는 주파수가 높을수록 NOx의 분해율이 증가하였다. 방전형태에 대한 NOx의 최대분해율은 SPCP일 때 방전전력 18[W]에서 80[%] 이었고 AC코로나 방전일 때 방전전력 805[W]에서 10[%] 이었으나 중첩방전의 경우는 14[W]에서 90[%]로 중첩방전의 효과는 10[%]이상 증가하였다.

• 가정간호학회지
• /
• 제10권2호
• /
• pp.123-131
• /
• 2003

This study was to compare the functional status. complication and readmission rates. and client satisfaction with nursing care of home-based care and hospital-based care for clients with Coronary Artery Bypass Graft. Raw data were collected by interviewing and reviewing charts of 41 clients with Coronary Artery Bypass Graft between June 2001 and July 2002 at an university hospital located in Seoul. Korea. Out of 41 clients. 15 were in home care group and 26 were in hospitalization group. The baseline characteristics of the groups were almost identical. Mean age was 61.7 and 75.6% of clients being male. For home care group. the data collection was made at discharge and at termination of home care. and for hospitalization group. at discharge and at the first visit of outpatient department. Complication and readmission rates were investigated at one month after operation. Collected data were then analysed by conducting Chi-square test. Wilcoxon rank sum test. and Wilcoxon signed ranks test with SPSS program. The level of significance was .05. The results of the study are summarized as follows: 1. Postoperative length of stay of the home care group was shorter than that of hospitalization group by 1. 14 days(8.45 days vs. 9.59 days). On average. 1.8 home visits per client were observed. 2. The functional status (Barthel Index) at the termination of home care was significantly increased from that at discharge. For hospitalization group. a significant increase was observed between the functional status at the discharge and that at the first visit of outpatient department. The differencies in incremental of the scores. between the groups. were however not significant. 3. Complication and readmission rates; no statistically significant difference between the groups was observed. 4. The client satisfaction with nursing care (CSS) at termination of home care was significantly higher than that at hospital discharge. In conclusion. the outcomes of the analysis suggest that the home care benefits clients with Coronary Artery Bypass Graft. Client satisfaction with nursing care rises at termination of home care as compare to that measured at hospital discharge. Meanwhile. there was no significant differences in functional status. and complication and readmission rates. Further. home care reduced the length of stay in hospital.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.88-91
• /
• 2004

In order to improve ozone generation, we experimentally investigated the silent discharge plasma and ozone generation characteristics of a multi-discharge type ozonizer. Ozone in a multi-discharge type ozonizer is generated by superposition of a silent discharge plasma, which is simultaneously generated in separated discharge spaces. A multi-discharge type ozonizer is composed of three different kinds of superposed silent discharge type ozonizers, depending on the method of applying power to each electrode. We observed that the discharge period of the current pulse for a multi-discharge type ozonizer can be longer than that of silent discharge type ozonizer with two electrodes and one gap.Hence, ozone generation is improved up to 17185 ppm and 783 g/kwh for the superposed silent discharge type ozonizer for which an AC high voltages with a 180 phase difference were applied to the internal electrode and the external electrode, respectively, with the central electrode being ground

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.820-823
• /
• 2000

The characteristics of wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of tungsten carbide in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension, the gap of deflection was decreased after thickness 60mm and discharge time of 6$\mu\textrm{s}$ due to the changing from fundamental mode to vibration mode. The deflection is the smallest at the water specific resistivity of 7.5 kΩ ㆍcm. The deflection is found to be decreased as increasing dwell time, and the result is due to the vibration of the pressure and the amount of the dielectric. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, was observed for rough wire-cutting EDM of STD-11. This phenomena is found to be decreased as the number of EDM is increased. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.609-616
• /
• 2005

A high ammonia nitrogen ($NH_3-N$) concentration has been recursively observed every winter season in Geum River, which hindered chemical treatment processes at a water treatment plant. A flushing discharge from Daecheong Dam was often considered to dilute $NH_3-N$, but information on the quantitative effect of flushing on the downstream water quality was limited. In this study, the impact of a short-term reservoir flushing on the downstream water quality was investigated through field experiments and unsteady water quality modeling. On November 22, 2003, the reservoir discharge was increased from $30m^3/sec$ to $200m^3/sec$ within 6 hours for the purpose of the experiment. The results showed that flushing flow tends to reduce downstream $NH_3-N$ concentrations considerably, but the effectiveness was limited by flushing amount and time. An unsteady river water quality model was applied to simulate the changes of nitrogen concentrations in response to reservoir flushing. The model showed very good performance in predicting the travel time of flushing flow and the effect of flushing discharge on the reduction of downstream $NH_3-N$ concentrations at Maepo and Geumnam site, but a significant discrepancy was observed at Gongju site.

• 대한전기학회논문지
• /
• 제39권3호
• /
• pp.321-328
• /
• 1990

The effect of a small discharge on the A.C (60Hz) breakdown characteristics in SF6 gas has been studied. Various experiments were investigated while varying distance of the rod-plane electrode, the gas pressure, and the magnitude of the small discharge current. Also, the position of the discharge path was observed for the purpose of evident investigation. As the results of this study, authors clarified the shifting mechanism of the position of discharge path with the ratio Rn (E/N distribution at a certain higher tempera-ture due to the small discharge current to E/N distribution at room temperature, E:electric field strength, N:particle number density). Also, the reason for the reduction of the A.C. breakdown voltage was investigated in the presence of a small discharge current.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.271-273
• /
• 2007

This paper presents the experimental results of underwater discharges in 25 mm point-plane gap caused by impulse voltage. Discharge phenomena were observed by digital cameras and recorded by oscilloscope. As a result, discharge patterns in positive and negative polarity have different shapes according to applied voltage amplitudes. The positive discharge is like root but the negative discharge is similar to bush. As the voltage is increased, the discharge routs are thick and have more branches. Also the time to breakdown is inversely proportional to voltage.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.832-839
• /
• 2010

The pulse discharge anchor is a method to increase the capacity of anchors using electric discharge geotechnical technologies, which is also known as pulse discharge and electric-spark technologies. The pulse discharge anchor has bulbed bond length that is expanded by high voltage electrokinetic pulse energy. 24 anchors were installed in the weathered soil and sandy clay at the Geotechnical Experimentation Site at Sungkyunkwan University in Suwon, Korea and attached strain gauge at 10 anchors. The numerical predictions by Beam-Column analysis were compared with observed measurements in a field load test.

• 한국산업융합학회 논문집
• /
• 제7권1호
• /
• pp.115-120
• /
• 2004

An indoor air cleaner consisting of a dielectric barrier discharge system and an electrostatic precipitator (ESP) was experimentally investigated. The function of the dielectric barrier discharge is to precharge particles by producing nonthermal plasma before indoor air enters ESP, leading to an enhancement in dust collection efficiency. The dependence of particle size distribution on the plasma discharge was examined to understand the mechanism of the particle precharging. The plasma discharge was found to increase the electrical force of the particles, rather than agglomerate them. Coarse particles in the range of 0.5 to $5.0{\mu}m$ were observed to be easily collected by this indoor air cleaner, and the present study laid emphasis on the removal of fine particles of $0.3{\mu}m$. The collection efficiency of the fine particles was largely enhanced by the plasma discharge.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.123-133
• /
• 1996

From the experimental study of wire-cut Electric Discharge Machining of alloyed tool steel and tungsten carbide, the characteristics such as cutting speed, surface roughness has been observed and evaluated for various conditions. Cutting speed is improved as peak discharge current and wire tension become increased, and gap voltage and spark cycle decreased. Surface roughness can be better when peak discharge current and gap voltage become smaller, or spark cycle and wire tension become larger. Secondary cut is recommended to obtain high precision and good quality.