• 제목/요약/키워드: Observation Gap

검색결과 157건 처리시간 0.031초

자외선측정(紫外線測定)에 의한 트리거트론시동특성(始動特性)의 해명(解明) (Elucidation of triggering characteristics for a trigatron spark gap by measuring UV light)

  • 고광철;;장용무;강형부
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1989년도 추계학술대회 논문집 학회본부
    • /
    • pp.142-144
    • /
    • 1989
  • Triggering characteristics of a trigatron spark gap have been studied by measuring self-emission UV light. By combining the measurement of the UV light with that of the trigger gap voltage and the lain discharge current, we distinguished clearly the differences between the trigatron operations in which the lain discharge occurs after the trigger discharge in the case of sale polarity between the trigger pin and the lain electrode at the opposite side, and the lain gap breakdown takes place before the formation of the trigger spark in the case of different polarity. We show the observation of UV radiation with the other electromagnetic measurements is a simple and reliable scheme to investigate the triggering properties of the trigatron spark gaps.

  • PDF

Aperture와 Feedline Gap 결합으로 급전되는 마이크로스트립 패치 안테나의 전자기 결합 메커니즘 (Electromagnetic Coupling Mechanism in the Aperture-Coupled and Feedline Gap-Coupled Microstrip Patch Antenna)

  • 김종규;윤이근;조영기
    • 대한전자공학회논문지TC
    • /
    • 제38권1호
    • /
    • pp.27-33
    • /
    • 2001
  • 개구결합으로 급전되는 마이크로스트립 안테나 구조에 대해, 접지면과 패치사이의 간격에 따라 ‘cavity'형과 ’parasitic'형의 두 가지 결합 메커니즘으로 나눌 수 있음을 이론적, 실험적으로 제시하였으며, 보다 단순한 급진구조로서 gap-결합 급전 마이크로스트립 안테나구조에서도 유사한 현상이 나타남을 확인하였다. 이러한 두 가지 결합메커니즘의 특징적 차이에 대하여 논의하였다.

  • PDF

백화점 공간의 연속 주시에 나타난 주의집중 특성 (Features of Attention Shown at Continuous Observation of Department-Store Space)

  • 최계영
    • 한국실내디자인학회논문집
    • /
    • 제24권6호
    • /
    • pp.128-136
    • /
    • 2015
  • This research, which has been planned to appreciate the features of continuous observation of space, has applied the procedure of acquiring continuous visual information when the act of watching takes place along the time to analyze the space characteristics through the scenes and time so that the features of attention shown in the process of acquiring visual information at the time of observing continuous scenes might be estimated. For analysis of the features of continuous observation was set up the premise that the features of observation and perception vary depending on gender, when the women shops in department stores were selected as research objects. The observation features found at the time of continuous observation of selling spaces in department stores were focused on two analysis methods in order to compare the differences and characteristics of the two. The followings are the findings. First, the area with predominant observation was found to be 87.1% in both methods. It was found that the analysis of observation features by "Analysis I" was useful for inter-sectional comparison of continuous images. Second, in case of extracting predominant sections, the ceiling or the structures which are the backgrounds rarely attracted any eyes. Depending on analysis method, there was the gap of 14.3%~25.0% between observed sections. Third, in case that the hall is curved, the eyes were found to be expanded from side to side and up and down. The review of observation numbers of predominant sections makes it possible to decide whether it should be regarded as (1) unstability or (2) expanding search, and when the images are enlarged from distant view to close-range view, the weakening vanishing point results in the increase of expanded search of surroundings. Accordingly, it was found that the characteristics of images has effects on the observation features when any space was continuously observed. Furthermore, the difference of analysis methods also was found to be likely to cause big differences in the results of analyzing observation features.

분리된 분할판에 의한 원형단면 실린더의 항력감소 (Drag Reduction on n Circular Cylinder using a Detached Splitter Plate)

  • 선승한;황종연;양경수
    • 대한기계학회논문집B
    • /
    • 제25권11호
    • /
    • pp.1632-1639
    • /
    • 2001
  • Control of drag farce on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.

곡률 반경이 큰 환상관 간극에서 CCFL에 대한 실험 연구 (An Experimental Study on the CCFL in Narrow Annular Gaps with Large Diameter)

  • 이승진;정지환;박래준;김상백;김희동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.795-800
    • /
    • 2000
  • A CCFL(Counter Current Flow Limit) test have been performed in narrow annular gaps with large diameter, because it has been confirmed that the CCFL phenomena affected the critical power in hemispherical narrow gap geometries from the SONATA(Simulation Of Naturally Arrested Thermal Attack)-IV (In-Vessel)/VISU(Visualization)-II experiments. The objectives of the CCFL experiments are to investigate the small gap sizes(1, 2mm) effect on CCFL under the large diameter condition and to confirm the findings of the VISU-II study that global dryout in hemispherical narrow gaps was induced by the CCFL. The test section was made of acrylic resin to allow visual observation on the two-phase flow behaviors inside annular gaps. It was observed from visualization that a part of water supplied was accumulated in the upper plenum and a significant increase in the differential pressure across the gap was occurred, which was the definition of the CCFL occurrence in this experimental study. From the experimental results in annular gap with large diameter it can be known that an increase in the differential pressure was not big at small air flow-rates. When the CCFL was occurred, the differential pressure across gaps was increased significantly and a water accumulated in the upper plenum. The occurrence of CCFL was correlated using the Wallis parameter.

  • PDF

Growth-Suppressing Activity of the Transfected Cx26 on BICR-M1Rk Breast Cancer Cell Line

  • Lee, Hae-Jung;Rhee, Seung-Keun
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권5호
    • /
    • pp.477-482
    • /
    • 2011
  • There are accumulating evidences suggesting that connexin (Cx), a gap junction channel-forming protein, acts as a growth suppressor in various cancer cells, and this effect is attributeed to the gap junction-mediated intercellular communication (GJIC). In order to characterize the relationship between the growth-arresting activity of Cx26 and its cytoplasmic localizations after expression, we linked a nuclear export signal (NES) sequence to Cx26 cDNA before transfecting into a rat breast cancer cell line. A confocal fluorescent microscopic observation revealed that the insertion of NES minimized the nuclear expression of Cx26, and increased its cytoplasmic expression, including plasma membrane junctions. Total cell counting and BrdUrd-labeling experiments showed that the growth of the breast cancer cells was inhibited by 74% upon transfection of Cx26-NES, whereas only 9% inhibition was observed with only Cx26 cDNA.

Weld Defect Formation Phenomena during High Frequency Electric Resistance Welding

  • Choi, Jae-Ho;Chang, Young-Seup;Kim, Yong-Seog
    • Journal of Welding and Joining
    • /
    • 제19권3호
    • /
    • pp.267-273
    • /
    • 2001
  • In this study, welding phenomena involved in formation of penetrators during high frequency electric resistance welding were investigated. High speed cinematography of the process revealer that a molten bridge between neighboring skelp edges forms at apex point and travels along narrow gap toward to welding point at a speed ranging from 100 to 400 m/min. The bridge while moving along the narrow gap swept away oxide containing molten metal from the gap, providing oxide-free surface for a forge-welding at upsetting stand frequency of the budge formation, travel distance and speed of the bridge were affected by the heat input rate into strip. The travel distance and its standard deviation were found to have a strong relationship with the weld defect density. Based on the observation, a new mechanism of the penetrator formation during HF ERW process is proposed.

  • PDF