• 대순사상논총
• /
• 제23권
• /
• pp.241-292
• /
• 2014

This article as an attempt to analyze Jin-beop-joo(眞法呪, incantation of true law) and the view of Yang-wui Sangje(兩位上帝, Sangje in two Godship) corresponds to the second preliminary work prior to the research on the view of Sangje in Daesoonjinrihoe. The points of this article are as follows: First, Jin-beop-joo and 15 Godship(神位) based hereupon are one of the most essential elements comprising the view of Sangje in Daesoonjinrihoe. Since the other Jeungsan line religious orders except Daesoonjinrihoe does not use 15 Godship in explaining and understanding Jeungsan, this fact should be regarded as an important characteristic of Daesoonjinrihoe. Second, 15 Godship is the important installation to assemble Sangje and the other gods in the same place. In Buddhism temples and China-Taoism temples, the gods each are placed in a separate palace. Whereas Sangje and the gods are concentrated in the same place, Yound-Dae(靈臺) which is the shrine of Daesoonjinrihoe. This fact shows Sangje takes the reins to the gods visually. 15 Godship facilitates that system. Third, the number 15 of 15 Godship symbolizes the natural laws of the cosmos. Thus the shrine of Daesoonjinrihoe implies the law of universe emblematically. Forth, 15 Godship shows that the Highest God in Daesoonjinrihoe are located in the middle of the functional gods ruling over nature like mountain, sea, season, the Great Dipper, and Taoistic or Buddhistic gods like Ok-hwang Sangje(玉皇上帝, The Great Jade Emperor), Seoga-Yeorae(釋迦如來, Tathāgata Buddha), Kwan-seong-Jegoon(關聖帝君, Holy god Guan Yu), along with various envoys and ancestral gods. Besides, considering the fact that the majority of 15 Godship consists of the Eastern deities, it verifies the view of Sangje in Daesoonjinrihoe is built in the Eastern religions. Fifth, whereas the other Jeungsan line religious orders have a tendency of understanding Jeungsan as Ok-hwang Sangje, Daesoonjinrihoe worships Jeungsan as Gu-cheon Sangje(九天上帝), not as Ok-hwang Sangje. This accords with the following fact; Jeungsan is the highest ruling entity in Gu-cheon, whereas in Jinbeonju, which was handed down from Jeungsan, the highest ruling entitiy in Gu-cheon is expressed as a different being from Ok-hwang Sangje. Sixth, Daesoonjinrihoe understands Sangje as the form of two Godship, Yang-wui Sangje, which are Gu-cheon Sangje and Ok-hwang Sangje. Judging from the form of salutation, the status of these two Sangjes are the same. Yet, the object of belief is Gu-cheon Sangje as the highest God, while Ok-hwang Sangje is stipulated as the one who has wielded a true law succeeding to the Gu-cheon Sangje's will. The religious term of Yang-wui Sangje don't imply meaning Gu-cheon Sangje and Ok-hwang Sangje are the same rank. Yang-wui Sangje is the term expresses Sangje in two Godship and involves the orthodox heritage of Daesoonjinrihoe. Along with An Introduction to the Study of the Outlook on the Highest Ruling Entity in Daesoonjinrihoe (I), this article is written, while giving a thought to construct the religiography on the highest God in Daesoonjinrihoe. I hope this article accompanied with the previous one, can be contributed to the fertilization of the soil in the field of Daesoon religious studies.

• 동양고전연구
• /
• 제49호
• /
• pp.73-107
• /
• 2012

여헌 장현광(1554-1637)은 조선중기를 대표하는 유학자이면서 우주론과 자연학을 가장 체계적으로 저술한 사람이다. 조선조 유학의 지리적인 학맥에서 여헌은 남명 조식과 한강 정구의 학풍을 이어받으면서 풍수와 지지편찬을 계승한 사람으로 자리매김 될 수 있다. 여헌은 주자학에 영향을 받았지만 역학(易學)의 기틀을 견지하였으며, 사변적인 공리공론에 머무르지 않고 실용적 경세학(經世學)으로서의 지리를 인식하였다. 여헌의 지리인식 방법은 역학(易學)의 체계와 구도 상에서 이루어졌다. 여헌은 자연에 대한 인간 본위(本位)의 인식태도를 드러내며, 따라서 인사의 공능이 지리의 조건보다 우선되는 준칙이었다. 여헌에게 산수와 자연은 비덕(比德)의 공부대상이었고, 자연공부 방법은 대상물의 관찰을 통해 생명의 이치를 자득하고, 무심한 경지를 통해 천지의 마음에 이르는 것이었다. 유학의 가르침을 삶의 지침으로 삼았던 여헌에게 있어서 낙토(樂土)는 안분자족(安分自足)함에서 얻어지는 것이었다. 여헌에게 지리인식의 의의는 생활의 실용적인 이익 됨에 목적을 둔 필수적인 지식정보였다. 여헌은 은거지의 생활현장에 자신이 견지한 유학적 우주관과 세계관을 '우주사업'의 일환으로 구현하였다. 이러한 의식과 태도는 주거지의 장소경관과 자연경물(自然景物)을 북극성과 주위 28수의 별자리로 상징화하여 명명하고 우주적 중심 공간으로 구성하는 방식으로 나타났다. 주자의 무이구곡(武夷九曲) 경영에서 비롯된 유학자들의 동천구곡(洞天九曲) 전통은 조선시대에 유행되었지만, 여헌의 장소 구성 체계는 여타의 형태와 방식을 뛰어넘은 우주적 구도의 독창성이 있다. 여헌의 장소 명명 의식에는 선현을 본받고자하는 태도, 자연물의 형용과 성정에 대한 비덕(比德), 그리고 은거(隱居) 의식의 반영이 나타난다. 여헌의 국토관 및 국토이해는 지형개관, 산수이해, 도읍입지, 지역이해, 풍토론, 현실인식의 방식으로 체계적으로 드러나고 중국의 지리적 조건과도 비교되어 파악되었다. 그의 국토인식과 이해방식은, 국토의 유기체적인 인식, 주자학의 자연관이 반영된 기적(氣的)인 국토인식, 산천 인식과 도읍 입지의 풍수적 이해, 지역구분을 통한 비교론적 이해, 인물과 풍속에 대한 풍토론적 이해 방식 등으로 요약할 수 있다. 여헌은 역의 포괄적인 사상체계 범주에서 풍수도 수용하였다. 그가 풍수를 수용할 수 있었던 배경에는 남명과 한강을 계승하는 학풍에서 연유되는 바가 있었다. 여헌은 풍수지식을 활용하여 주거지의 입지를 정하기도 하였고, 고향 연고지의 여러 곳에 대해 풍수적 견지로 언급하기도 했다. 그의 풍수관을 보면, 묘지풍수에서 형세론적 이치는 수긍하고 있지만 장례기일을 미루는 발복 목적의 행위는 비판하였다. 그리고 고을의 풍수에서 숲의 조성을 통한 비보의 필요성을 인정하였다. 이러한 풍수관은 문도(門徒)들의 지지편찬에도 일정하게 반영되었다. 여헌 학풍에서 주목할 만한 지리학적 특징으로 꼽을 수 있는 것이 지지(地誌)의 편찬이다. 이것은 남명과 한강의 치용(治用) 정신과 경세적(經世的) 실천을 계승한 학풍이기도 했다. 여헌은 지지를 중요시하게 생각하면서 문인들에게 편찬을 독려하였다. 고을의 통치자나 지식인으로서 지역의 역사와 옛 일을 잘 알아야하고, 권면하고 징계하는 기준이 마련될 필요가 있다는 것이다. 이러한 여헌의 견해는 이후 문인들의 지지편찬 취지와 내용 구성에 지침이 되었다. 이 연구는 여헌의 지리인식에 관한 사실적인 면모의 정리와 지리적 학풍의 계승 맥락에 관한 고찰에 그친 한계가 있다. 다음에는 여헌 전후 유학자들의 지리인식과 지지편찬 전통이 어떻게 전승되면서 전개 발전되었고 질적으로 변천해 나갔는지를 살피고자 한다. 이러한 연구는 학계에서 공백으로 남아있는 조선 초 중기 유교지식인의 지리학사를 정립하는데 일조할 수 있으리라 믿는다.

• 대한간호학회지
• /
• 제11권2호
• /
• pp.55-68
• /
• 1981

The prime object of the study is to evaluate how much all the students of the Nursing Schools throughout the nation are in comprehension toward the application of nursing process to clinical experience as means of systematic solution of nursing problems. An effort has been made to find out the actual state whether they are in practice of clinical experience in accordance with application of nursing process, over the period of four weeks managing from December 1st to 28th, 1980 and centering on 36 nursing schools, and meanwhile and evaluation, employing the assessment tool used by Bertuccietal, has been made on the nursing process notes recorded by 200 senions out of 21 nursing schools where application of nursing process to clinical experience being in practice. The assessment tool is composed of 5 different criteria in view of patient nursing and authors made an attempt to find out the result of clinical experience on application students in accordance with 5 different scoring criteria and further evaluating all the findings thereof. The findings were disposed of accordance with practice duration and criteria of the specific sudents subject to this finding as to verify the scoring difference in significance and of which the results are as follows: 1) as of now, in 21 (58.2%) out of 36 nursing Schools nursing process in being appliced in clinical experience. 2) Schools that started the application of nursing process to clinical experience amount to - for more than 4 yrs -6 (28.6％) - for 2 to 3 yrs-11s(52.4％) - for 1 yr -4 (19.0％) 3) As for the response upon application of nursing process. To clinical etperience, the largest voice (61.9%) heard was that it is rather difficult beyond the lecturing thereof, to practically apply it outs patients and the second voice (19.1%) turned out to be that it is hard to put in practice owing to uninformed nurses of the process serving in the clinical field. 4) The response. Of the processors assigned to instruction as to the most difficult problem in criteria of nursing process, the largest voice (38.2%) centered on the problem assessment while the second voice (17.7%) on the indirect nursing activity and the objective data respectively and considered to be the easiest was the indirect nursing activity (11.7%). 5) In order for a satisfactory. application of nursing process to clinical experience hence-forth, it has been pointed out that sufficient number of nurses should be supplemented in clinical field (44.1%) and at the same time supplementory education (35.3%) centered around professors be necessary. 6) Of the criteria that record result of nursing process, a significant difference in comprehension of subjective and objective data has been revealed according to the degree of the practice duration of application to clinical experience. For instance, while although poor it may seen, only 74.9% in subjective data and 71.1% in objective data represent the student group in practice for more than 4 years and only 56.3% in subjective data and 66.8% in objective data represent the student group in practice for 2 to 3 years but they still surpass in comprehension over the student group in practice for 1 year attaning only 19.6% in subjective data and 16.8% in objective data (P < 0.005). 7) As for problem assessment, the student group who started application of nursing process for 4 years stand for 37,7% the group for 2 to 3 years started for 25.3% and the group for 1 year started for 5.4%, revealing no significant difference according to duration (P < 0.5) and as poor as to indicate only 22.8% on an overage is in comprehension. 8) On direct and indirect nursing activity, the student group of for more than 4 years in appling nursing process (representing 49.5% in direct nursing activity, 21.4% in indirect nursing activity). Know more about it than the student group of for 2 to 3 years (representing 36.3% in direct nursing activity, 20.8% in indirect nursing activity) but revealed no significant difference. (P ＜ 0.5) 9) The student group applying nursing process for more than 4 years subjective data (74.9%) comprehend were more than objective data (71.1%) but shown no significant difference (P < 0.5). 10) However, the student group applying nursing process for 2 to 3 years comprehend objective data (66.8%) well ever subjective data (55.5%) indicating that 40.9% in average is in comprehension, thereby revealing a significant difference (P < 0.005). 11) On the other hand, the student group applying nursing process to clinical experience for 1 year had revealed themselves as poorly as to comprehend only 11.7% are an average of it, revealing no significant difference (P < 0.5). In consequence of the fore going, I the conductor of the present study, hereby suggest the following points: 1) Application of nursing process to clinical experience be practiced in all the Nursing Schools all over the nation at the earliest possible date in order that scientific nursing be prevailed (as of now only 58.0%), 2) In teaching nursing process, it is desirable to teach specific method of applying to practical clinical situations. 3) In order to meet the end of satisfactory application of nursing process to clinical experience, sufgecient nursing man power be sysplemented in clinical field and at the save time supplementary education by professors is necessary. 4) Sinces the students whose application duration of nursing process to clinical experience is longer comprehend more about it, it is reguired that the schools not yet in practice of the application be promptlyurged to follow. 5) Of the criteria recording nursing process, since it is comparatively hard to comprehend“assessment”and“Direct and indirect nursing activity”, a concentrated instruction is desirable. 6) The students whose duration of application of nursing process to clinical experience falls short of 1 years be put in a concentrated guidance program on individual criterion.

• 항공우주정책ㆍ법학회지
• /
• 제20권1호
• /
• pp.9-43
• /
• 2005

우리나라는 2005 년 11월에 한국항공우주연구원이 개발한 다목적실용위성 2호(아리랑 2호)를 발사하게 될 것이고 2006 년 6월에는 한국통신의 통신 방송위성 5호(무궁화 5호)가 발사될 예정이고 2007 년에는 한국항공우주연구원이 한반도의 남해안 외나로도에 건설하고 있는 "우주센타"가 준공되어 자력으로 개발한 우주발사체(KSLV-1 : 로켓)를 이용하여 국산 과학기술위성2호(100kg급의 소형)의 발사 등 우리나라에 본격적인 우주개발시대에 접어들게 된다. 따라서 우리나라의 우주개발중기계획에 따라 2010년까지 13기의 각종위성과 발사체를 개발하여 "우주센타"에서 시험발사와 발사를 자주 하게 될 것이다. 이와 같이 위성발사에 따라 예상할 수 없는 발사사고 발생될 가능성도 있게 된다. 상기위성들을 국내외에서 우주발사체(로켓)를 이용하여 발사하는 과정에서 있을지도 모르는 로켓 발사사고로 인해 지상에 있는 제3자의 인적 손해 또는 물적 손해를 입혔을 때에 선진국의 입법례와 같이 이를 신속히 해결하기 위하여 가해자와 피해자 양자 간의 공정한 책임규명, 책임한계 및 재판의 기준, 손해배상책임 등을 규정하고 우리나라의 우주개발중장기기본계획을 성공적으로 달성시키기 위하여 국내우주법의 제정이 필요로 하게 되었던 것이다. 우리나라는 우주개발을 체계적으로 진흥시키고 우주물체를 효율적으로 이용관리하기 위한 법적 제도적 틀을 마련하고, 우주개발국가로서 국제조약에 규정된 국가의무를 이행하기 위한 법적 근거를 마련하기 위하여 우주개발진흥법을 2005년 5월 31일 정부가 제정 공포하여 동법 부칙에 의거 6개월 후인 2005년 12월 1일부터 시행하게된다. 본 논문에서는 우주개발진흥법의 제정을 계기로 현재 세계도처에서 발생되고 있는 우주사고의 특성과 사례, 우주개발진흥법을 제정하는데 계기가 되었던 4개의 우주관계 국제조약과 세계 각국의 국내우주관계법의 입법례((1)미국,(2)러시아, (3)영국, (4)독일, (5)프랑스, (6)캐나다, (7)일본, (8)스웨덴 (9)오스트레일리아, (10)브라질, (11)노르웨이, (12)남아프리카, (13)아르헨티나, (14)칠레, (15)우크라이나)를 소개한 후 우리나라 우주개발의 실적과 현황 및 전망 및 우주개발진흥법의 입법배경과 경위 및 주된 내용, 2005년 8월 19일 과학기술부가 입법 예고한 우주개발진흥법 시해령 안과 시행규칙안의 주요내용, 앞으로의 과제로서 우리나라 우주관계기구의 개혁 등 순서로 설명하였다. 본 논문의 핵심이 되는 사항인 앞으로의 과제로서 우주관계기구의 개혁의 문제는 필자가 과학기술부의 우주관계 담당부서의 기구개혁과 한국항공우주연구원의 기구를 확대 개편하여 한국항공우주개발공사(가칭)의 설립을 제안하는 이유는 각종위성 및 발사체의 개발지연과 우주센터의 건립이 지연되지 않도록 하고 앞으로 우주개발중기계획에 따라 각종위성 및 발사체의 개발이 2010년까지 당초 정한 목표 년도에 완성시키어 우리나라의 우주산업을 세계10위권 내에 조기에 진입시키고자 하는데 그 목표가 있는 것이다.

• 지능정보연구
• /
• 제24권2호
• /
• pp.171-193
• /
• 2018

본 연구는 시멘틱 웹의 실질적 구현체인 LOD 클라우드에서 연결정책을 활용함으로써 LOD들간 연결을 효과적으로 제공하고 LOD의 변경된 내용을 검색결과에 빠짐없이 반영할 수 있는 방안을 제시한다. 현재 LOD 클라우드에서는 개체간 연결은 를 이용하여 개체들이 동일함을 명시적으로 기술하는 방식으로 이루어져 있다. 하지만, 이러한 명시적 연결방식은 LOD 클라우드 규모의 방대함에도 불구하고 개체간 동일성을 개체단위에서 파악하여야 하는 어려움이 있으며 주기적으로 LOD에 추가하여야 함에 따라 검색 시 개체들이 누락되는 한계가 있다. 이를 극복하기 위하여 본 연구에서는 명시적 연결을 생성하는 대신 LOD별로 연결하고자 하는 LOD와의 연결정책을 수립하여 LOD와 함께 공개하는 방식을 제안한다. 연결정책을 활용함으로써 연결하여야 할 동일개체를 검색시점에서 파악할 수 있으므로 추가되었던 개체들을 누락됨 없이 검색결과에 포함시킬 수 있고 LOD 클라우드에서의 연결성도 효과적으로 확충할 수 있다. 확충된 연결성은 정보의 지능적 처리의 선행과정인 지식확장의 근간이 된다. 연결정책은 연결하고자 하는 소스와 타겟 LOD의 주어 개체들간의 동일성을 평가하는데 도움이 되는 술어 쌍을 명세하는 방식으로 수립하며 검색 시 이러한 술어쌍에 대응하는 RDF 트리플을 검색하고 이들의 목적어들이 충분히 동일한 것인가를 평가하여 주어개체들의 동일수준을 판단한다. 본 연구에서는 이러한 연결정책을 이용하여 여러 LOD들을 심층적으로 검색하는 시스템을 구현하였다. 검색과정에서는 기존 명시적 연결들도 함께 활용하도록 구현하였다. 검색시스템에 대한 실험은 DBpedia의 주요 LOD들을 대상으로 진행하였다. 실험결과 연결대상 개체들의 목적어들이 0.8 ~ 0.9의 유사수준을 가지는 경우 적정한 확장성을 가지고 충분히 신뢰적인 개체들을 적절하게 포함하는 것으로 확인하였다. 또한, 개체들은 8개 이상의 동일연결을 제공하여야 검색결과가 신뢰적으로 활용될 수 있을 것으로 파악되었다.

• 헤리티지:역사와 과학
• /
• 제37권
• /
• pp.371-405
• /
• 2004

문화재의 국제적인 유통행위는 다수 국가가 관계되므로 이 문제 해결을 위해서는 국제법적인 접근이 필수적이다. 2차대전 이후 문화재의 가치가 물질적 가치에서 국가와 민족의 정체성 확립을 위한 정신적 민족적인 측면의 가치가 중시되면서 신생 독립국과 식민제국들 간에 문화재의 소유권 다툼이 쟁점화 되어 문화재 반환을 목적으로 하는 국제적인 협력과 법제도적인 장치의 모색이 필요하게 되었다. 문화재의 불법거래에 관한 국제협약으로 유네스코(UNESCO)를 중심으로 문화재의 준비적 보존의무를 부과하는 1954년 "전시 문화재 보호에 관한 협약", 문화재 반 출입에 대한 통제와 반출에 허가장 발급을 통해 불법 취득 유통 억제를 위한 1970년 "문화재불법 반 출입 및 소유권 양도의 금지와 예방수단에 관한 협약", 도난이나 불법적으로 반출된 문화재의 국제적 반환을 의무화한 1995년 "유니드로와 협약"이 있다. 또한 유엔(UN)의 산하 기관으로 유네스코(UNESCO)는 특히 소위 문화재 분과(the Division of Cultural Heritage)를 마련하여 문화재에 대한 관계업무 처리에 주력하여 오고 있으며, UN 총회 역시 1973년의 결의 3187 이후로 문화재 보호에 관하여 계속적인 관심을 표현하여 오고 있는데 그 기본내용은 문화재의 원산국에로의 반환에 관한 국제 협력을 확인하고, 각국에 예술품 및 문화재의 불법거래 금지 및 방지를 위한 적절한 조처를 권고하며, 자국내 문화재에 대한 목록화 작업을 권고함과 아울러 종국적으로 많은 국가가 유네스코(UNESCO) 협약의 당사국이 되어 국제적인 협력체제의 구성원이 될 것을 권장하는 것이다. 국제협약의 한계로 협약상의 문화재에 대한 정의 차이가 존재한다. 먼저 1954년 협약상의 문화재는 동산에만 국한되는 것이 아니라 부동산도 포함하고 있는데 1970년 협약은 그 제정 목적이 '문화재의 불법적인 반 출입 및 소유권 양도의 금지와 방지수단'의 강구에 있으며 따라서 그 규율대상도 원칙적으로 유형의 동산문화재(tangible movable cultural property)에 국한된다고 봐야할 것이다. 1995년 협약도 역시 동산문화재를 규율대상으로 삼고 있다. 이 두 협약은 이 점에서 1954년 협약이나 주로 부동산적인 특성을 갖는 문화유산 및 자연유산을 대상으로 하는 1972년의 협약과 차이를 보이고 있다. 이러한 차이는 문화재의 개념에 대한 내재적인 차이를 반영하는 것이 아니라 주어진 협약의 제정 목적 및 취지가 다름에서 기인하는 것이다. 우리나라의 경우 1866년의 병인양요, 일본에 의한 36년간의 식민통치, 군정기, 경제 개발기 등을 통하여 다수의 문화재가 해외로 유출되었다. 물론 이들 문화재를 전부 반환 받을 수도 없고 또 받을 필요도 없는 것이지만, 이들 중 일부는 한국 사회의 문화적 역사적 정체성의 형성에 중요한 역할을 한다거나 또는 이들의 외국(특히, 일본)에서의 소재가 과거 한국민에 대한 지배의 상징으로서 기능한다거나 할 경우 반환 문제가 제기될 수 있을 것이다. 이러한 경우에 우리의 입론을 강화하기 위해서는 1954년 협약 및 제1의정서의 비준은 적극적으로 고려해야 한다고 판단된다. 반환을 요구할 경우 우선 문화재의 도난 여부가 핵심이며 이 경우 국제협약에 따라 조치하면 될 것이지만 외교적 협상의 단계에 이르면 이 문제는 정치적 문제가 될 것이다. 이 경우 반환을 요구하는 국가는 상대국이 문화재를 반환하도록 유도해야 한다. 문화재의 불법거래 방지에 대한 절실한 필요성에 반해, 동북아 지역 국가 및 시민사회의 방지노력은 대단히 미흡한 실정인 바, 이를 실현하기 위한 국가 및 시민 사회적 차원의 체계적인 노력이 동아시아 지역 전체에서 활발하게 전개하여야 할 것이다. 문화재의 불법적인 거래를 가장 효과적으로 막을 수 있는 방법은 인터폴(Interpol) 회원국간 정보를 신속히 유통시키는 것인데 이를 위해서는 인터넷 기술에 바탕을 둔 통신 시스템을 개발해야 하며 도난당한 문화재의 불법거래를 방지하기 위한 보다 효율적인 방안으로 문화재 보호 법률의 도입, 국제협약의 가입, 수집품 목록 구축 등의 조치가 필요하다고 본다.

• 헤리티지:역사와 과학
• /
• 제57권1호
• /
• pp.126-144
• /
• 2024

고려시대 나전국화넝쿨무늬상자는 미세한 자개표면에 문양을 세기거나, 금속선을 이용해 넝쿨의 줄기를 표현하고, 금속선을 꼬아 각 문양의 경계를 구성하는 등 고려나전칠기의 대표적인 특징이 아주 세밀하게 표현되어있다. 현재 남아있는 고려시대 나전칠기는 경함 및 합의 형태를 가지고 있는 반면 이번 연구대상인 나전국화넝쿨무늬상자는 뚜껑과 몸체가 분리되는 상자의 형태를 하고 있어 제작목적 혹은 보관된 내용물을 추정하기 어려웠다. 이번 연구에서는 나전국화넝쿨무늬상자의 원형을 확인하기 위해 조형적인 특징을 확인하고, X선 투과촬영과 X선 형광분석을 통해 구조와 제작기법에 대해 규명하고자 하였다. 그리고 기존에 알려진 고려시대 나전칠기를 유형별로 분류 및 비교분석해 상자의 용도와 제작목적을 규명하고자 하였다. 조사결과 X선 이미지 상 바닥면과 속상자에서 직물이 확인되었다. 이를 통해 기물을 직물로 감싸는 목심저피칠기기법이 사용된 것을 확인할 수 있었다. 그리고 목리를 통해 복원부분으로 추정되는 부분의 판재구성과 기존 장석이 있었을 것으로 추정되는 부분을 확인할 수 있었으며 결구부에서 맞대임 방식으로 연결한 것을 확인할 수 있었다. 문양에 사용된 금속선은 X선 형광분석 결과 황동으로 판단된다. 조사결과를 근거로 현재 남아있는 고려시대 경함류 9점, 상자류 3점, 소상자류 2점 등 총 14점을 유형별로 분류해 유사성을 조사하였다. 이중 일본 개인소장 국화넝쿨무늬경함, 도쿠가와미술관 흑칠지국당초문나전경상, 영국박물관의 나전국당초문경함, 국내소장 나전칠국당초문합(소상자) 등 5점의 문양구성이 본 연구대상과 가장 유사하였다. 그리고 손상양상, 조형적 특성, 구조적 특징 등을 부위별로 대조한 결과 영국박물관의 나전국당초문경함의 형태가 나전넝쿨무늬상자의 원형으로 현재 형태로 변형된 것으로 추정된다. 마지막으로 이번 상자의 용도, 즉 제작목적을 확인하기 위해 당시 고려의 사회분위기와 비슷한 시기 제작된 고려대장경 인경본의 사례를 조사하였다. 당시 무신정권 이후 몽골의 침입을 겪으면서 국가의 안정과 개인의 명복을 빌기 위한 사경이 출현, 그리고 13세기 국내 인쇄술과 종이의 발전으로 점차 두루마리에서 절첩식 형태로의 전환기와 맞물려 경함에서 상자의 형태로 보관방식이 변경된 것으로 판단된다.

• 사상체질의학회지
• /
• 제11권2호
• /
• pp.151-183
• /
• 1999

사상체질진단(四象體質診斷)에 있어 임상적(臨床的)으로 가장 많이 활용(活用)되며 또한 객관성(客觀性)이 인정(認定)되고 있는 방법(方法)으로는 설문지(設問紙)를 이용하는 방법(方法)이 있으며 그 중 대표적으로 사상변증내용(四象辨證內容) 설문조사지(設問調査紙)(I)과 사상체질분류조사지(四象體質分類調査紙)(QSCC II)가 있으나, 그 체질판정(體質判定)에 있어 각기 한쪽 체질(體質)로 치우치는 경향성(傾向性)을 보이므로 인(因)하여 임상가(臨床家)에서는 그 나름대로의 가치(價値)를 지니면서도 크게 일반화(一般化)되지 못하는 것이 현실(現實)이다. 본(本) 연구(硏究)는 사상체질진단(四象體質診斷)의 객관화(客觀化)를 위한 설문지(設問紙)의 연구(硏究)로써 동의대학교(東義大學校) 한의과대학(韓醫科大學) 부속한방병원(附屬韓方病院)에 내원(來院)한 자(者) 692명(名)(종합건강진단센터 대상자(對象者) 575명(名)과 환자(患者) 117명(名) 중 설문지(設問紙)(I)과 설문지(設問紙)(II)의 설문조사(設問調査) 결과(結果)와 사상체질전공의(四象體質專攻醫)의 체질판별(體質判別) 결과(結果)가 모두 치(致)하는 250명(名) 중(中)에서 설문지(設問紙) 내용(內容)이 비교적(比較的) 충실(充實)한 200명(名)을 대상(對象)으로 설문조사(設問調査) 내용(內容)을 통계분석(統計分析)하고 이를 토대(土臺)로 새로운 설문(設問)의 구성(構成)을 시도(試圖)하여 다음과 같은 결과(結果)를 얻게 되었다. 1. 설문지(設問紙)(I), 설문지(設問紙)(II)의 총(總) 192문항(問項)((설문지(設問紙)(I) 71문항(問項), 설문지(設問紙)(II) 121문항(問項))중에서 유의성(有意性)을 가지는 문항(問項)(P값이 최소(最小) 0.04 이상(以下))은 84문항(問項)(설문지(設問紙)(I)이 39문항(問項), 설문지(設問紙)(II)가 45문항(問項))이었다. 이중에서 서로 중복되는 항목(項目)이 22항목(項目)을 감안하연 설문지(設問紙)(I)과 설문지(設問紙)(II)의 총(總) 192문항(問項) 중(中) 체질(體質)에 따른 유의도(有意度) 검사(檢査)에 있어서 실질적(實質的)으로 유의(有意)있게 나타나는 문항(問項)은 총(總) 73문항(問項)이었다. P값이 0.001이하(以下)의 값을 보인 문항(問項)은 설문지(設問紙)(I)이 33문항(問項)이었으며, 설문지(設問紙)(II)의는 40문항(問項)으로 나타나 대체로 유의성(有意性)이 매우 높음을 알 수 있었다. 2. "설문지(設問紙)를 통한 사상체질(四象體質)의 임상적(臨床的) 분류방안(分類方案) 연구(硏究)"와 "체질진단분류(體質診斷分類)에 따른 질병(疾病) 및 증상유형(症狀類型)에 관한 임상적(臨床的) 연구(硏究)II"에서 유의성(有意性)이 입증(立證)된 설문문항(設問問項)을 몇 가지 추가(追加)하여 총(總) 851문항(問項)의 설문지(設問紙)를 구성(構成)하였다. 각(各) 문항(問項)들을 항목별(項目別)로 나누어 살펴보면, <체격(體格)과 체형(體型)>을 묻는 문항(問項)이 7개(個) 문항(問項)이었고, <외모(外貌)(안색(顔色))와 태도(態度)>를 묻는 문항(問項)이 7개(個) 문항(問項)이었고, <습관(習慣)과 성격(性格)>을 묻는 문항(問項)이 3개(個) 문항(問項)이었고, <생리(生理)-병리상태(病理狀態)>를 묻는 문항(問項)이 3개(個) 문항(問項)이었고, <평소(平素) 건강(健康)할 때 자주 느끼는 증상(症狀)>을 묻는 문항(問項)이 4개(個) 문항(問項)이었고, <식사습관(食事習慣)>을 묻는 문항(問項)이 3개(個) 문항(問項)이었으며, <평소(平素) 잘 나타나는 증세(症勢)>를 묻는 문항(問項)이 14개(個) 문항(問項)이었고, <일처리와 장단점(長短點)>을 묻는 문항(問項)이 6개(個) 문항(問項)이었고, <대인관계(對人關係)>에 대하여 묻는 문항(問項)이 7개(個) 문항(問項)이었고, <평소(平素)의 마음>에 대하여 묻는 문항(問項)이 5개(個) 문항(問項)이었고, <감정특성(感情特性)>에 대하여 묻는 문항(問項)이 1개(個) 문항(問項)이었고, <행동특성(行動特性)>에 대하여 묻는 문항(問項)이 10개(個) 문항(問項)이었고, <성격(性格)>에 대하여 묻는 문항(問項)이 15개(個) 문항(問項)이었다. 3. 문제지(設問紙)에서 소양인(少陽人)에 해당되는 항목(項目)은 84항목(項目)이었으며, 소음인(少陰人)에 해당되는 항목(項目)은 87항목(項目)이었으며, 태음인(太陰人)에 해당되는 항목(項目)은 70항목(項目)이었다. 또한 각(各) 설문항목(設問項目)의 유의성(有意性) 검사(檢査)에서 나타난 응답율(應答率)을 점수화(點數化)하여 가산점(加算點)을 부가(附加)한 후(後) 합산(合算)한 결과(結果) 소양인(少陽人) 항목(項目)의 점수(點數) 합계(合計)는 7785.04점(點)이었고, 소음인(少陰人) 항목(項目)의 점수(點數) 합계(合計)는 7742.80점(點)이었으며, 태음인(太陰人) 항목(項目)의 점수(點數) 합계(合計)는 7746.60점(點)이었다. 4. 새로운 설문지(設間紙)(III)의 유의성(有意性)은 임상환자(臨床患者) 75명(名)의 체질진단(體質診斷)에 있어 73.33%의 진단(診斷) 정확율(正確率)을 보이고 있으 나, 소음인(少陰人)과 태음인(太陰人)에 비하여 소양인(少陽人)의 판별율(判別率)이 다소 떨어지게 나타나고 있으며 태양인(太陽人)은 설문(設問)에서 제외(除外) 되었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.