• 복식문화연구
• /
• 제26권3호
• /
• pp.296-312
• /
• 2018

In this study, we analyzed the whole design of the necklace in detail, which reflects the artistic sense of handicraft in couture. The purpose of the study was to identify the characteristics of the design based on the analysis findings and to provide basic data to help fashion designers. The research method entailed analyzing trends in necklace design - viewed in fashion magazines and on websites - by year, season, brand, kind, material, color, and image. The identified necklace design characteristics were as follows. First, artistry and originality are dramatically expressed through the use of a broad range of materials. Second, due to the necklace's role as an object of perfect beauty, in a number of images, the necklaces were presented in convergence and contrast with overall costumes. Third, the dramatic effects of layering revealed a strong presence and individualized styling. Necklaces are created with diverse sculptures by realizing the creative imagination of fashion designers. Even though they looked a little different every year, there were designs in the collections constantly. Round shape and princess length were preferred. In particular, the mix type was used to express dramatic effect by focusing neck part in entire styling which different length of necklaces were layered and worn. As a result, it meets the needs of consumers who emphasize brand differentiation and diversity, and it is believed that the role of necessities in fashion will continue and it creates economic demand in the fashion industry.

• 설비공학논문집
• /
• 제7권1호
• /
• pp.73-80
• /
• 1995

The object of the present study is to develop a high performance evaporator for automotive air conditioner. The experiment has been conducted on evaporative heat transfer coefficient inside a plate type heat exchanger with a sharp 180-degree turn flow. The test plates have different formed surface, cross-ribbed channel and elliptical-ribbed channel. Also experimental study has been performed to determine optimal design in elliptical-ribbed plate heat exchanger with different turn clearance. In addition to the above experiments, refrigerant behavior and surface temperature distribution in the plate heat exchanger were observed using color thermoviewer(infrared thermometer). In this experiment, working fluid was used R-12 and test conditions were as follows : (1) saturation pressure of $2.116kg/cm^2$, (2) mass fluxes of 40 to $70kg/m^2s$, (3) heat fluxes of 4,500 to $7,300W/m^2$, (4) inlet quality of 0.1 to 0.7. The results indicated that the evaporative heat transfer coefficient of an elliptical-ribbed plate heat exchanger was higher than that of cross-ribbed plate heat exchanger. Also optimal turn clearance in an elliptical-ribbed plate heat exchanger was determined.

• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.637-644
• /
• 2006

Biomedical image is often complex. An applied image analysis system should deal with the images which are of quite low quality and are challenging to segment. This paper presents a framework for color cell image segmentation by learning and classification online. It is a robust two-stage scheme using kernel method and watershed transform. In first stage, a two-class SVM is employed to discriminate the pixels of object from background; where the SVM is trained on the data which has been analyzed using the mean shift procedure. A real-time training strategy is also developed for SVM. In second stage, as the post-processing, local watershed transform is used to separate clustering cells. Comparison with the SSF (Scale space filter) and classical watershed-based algorithm (those are often employed for cell image segmentation) is given. Experimental results demonstrate that the new method is more accurate and robust than compared methods.

• 천문학회보
• /
• 제41권1호
• /
• pp.53.1-53.1
• /
• 2016

With the official start of the operations of the three 1.6 m KMTNet telescope systems from 2015 October, we have initiated a program named KMTNet Supernova Program (KSP) from 2015 to 2019 aiming at searching for supernovae (SNe), other optical transients and related sources. Taking advantage of the 24-hour coverage, high cadence and multi-color monitoring observations, this is optimal for discovering early SNe and peculiar ones. From the start of the previous test observing runs of ~half a year, we have performed observations on several nearby galaxy groups and nearby galaxies with short separations on the sky. We have developed data reduction/variable object search pipelines, meanwhile we have discovered some interesting transient objects. We also stacked all the images for given fields, searched for new objects/galaxies, and discovered several new dwarf galaxies, e.g., in the NGC 2784 galaxy group field (H. S. Park et al.'s talk). We will report the current project status and the results obtained.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.166-171
• /
• 2009

In recent years, video detection systems have been implemented in various infrastructures such as airport, public transportation, power generation system, water dam and so on. Recognizing moving objects in video sequence is an important problem in computer vision, with applications in several fields, such as video surveillance and target tracking. Segmentation and tracking of multiple vehicles in crowded situations is made difficult by inter-object occlusion. In the system described in this paper, the mean shift algorithm is firstly used to filter and segment a color vehicle image in order to get candidate regions. These candidate regions are then analyzed and classified in order to decide whether a candidate region contains a license plate or not. And then some characters in the license plate is recognized by using the fuzzy ARTMAP neural network, which is a relatively new architecture of the neural network family and has the capability to learn incrementally unlike the conventional BP network. We finally design a license plate recognition system using the mean shift algorithm and fuzzy ARTMAP neural network and show its performance via some computer simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2714-2716
• /
• 2000

칼라는 물체의 특성을 나타내는 고유한 성질 중의 하나로 칼라 정보를 이용하면 물체를 추적하는데 많은 도움을 얻을 수 있다. 그러나 동일한 칼라의 물체일지라도 조명의 상태나 물체의 형태 등에 따라 실제 이미지 상에 나타나는 칼라는 조금씩 다른 칼라값을 갖는다. 따라서 칼라를 이용하여 물체를 표현하기 위해서는 이미지 상에 나타나는 이러한 물체의 칼라 분포를 효과적으로 모델링할 수 있는 방법이 필요하다. 또한 한번 모델링된 칼라일지라도 물체가 이동하거나 조명이 변화하게 되면 칼라의 분포가 변화하므로 모델링된 칼라가 이러한 변화에도 적절히 대응할 수 있어야 칼라 정보를 이용하여 물체를 추적할 수 있다. 본 논문에서는 이러한 문제를 해결하기 위하여 물체의 칼라 분포를 look-up table을 이용하여 모델링하고 추적하는 물체의 칼라 정보를 이용하여 모델링된 칼라 분포를 다시 갱신하는 적응형 look-up table 방법을 제시하였다. 적응형 look-up table은 모든 칼라값을 테이블로 표현하므로 어떠한 칼라 분포도 모델링할 수 있으며 연산시 단순 참조 방식으로 처리되기 때문에 빠른 계산이 가능하다. 또한 look-up table은 지속적으로 갱신되므로 조명의 변화나 물체의 이동 등으로 인한 칼라 분포의 변화에도 적절히 대응할 수 있다. 본 논문에서는 칼라 정보를 이용하여 물체를 추적하는데 적응형 look-up table을 이용함으로써 적응형 look-up table의 타당성을 검증하였다.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.935-956
• /
• 2016

With the help of advanced image acquisition and processing technology, the vision-based measurement methods have been broadly applied to implement the structural monitoring and condition identification of civil engineering structures. Many noncontact approaches enabled by different digital image processing algorithms are developed to overcome the problems in conventional structural dynamic displacement measurement. This paper presents three kinds of image processing algorithms for structural dynamic displacement measurement, i.e., the grayscale pattern matching (GPM) algorithm, the color pattern matching (CPM) algorithm, and the mean shift tracking (MST) algorithm. A vision-based system programmed with the three image processing algorithms is developed for multi-point structural dynamic displacement measurement. The dynamic displacement time histories of multiple vision points are simultaneously measured by the vision-based system and the magnetostrictive displacement sensor (MDS) during the laboratory shaking table tests of a three-story steel frame model. The comparative analysis results indicate that the developed vision-based system exhibits excellent performance in structural dynamic displacement measurement by use of the three different image processing algorithms. The field application experiments are also carried out on an arch bridge for the measurement of displacement influence lines during the loading tests to validate the effectiveness of the vision-based system.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.493-496
• /
• 2005

본 논문에서는 번호판 고유의 복합 색상 정보와 수직 에지 정보를 이용한 번호판 후보 영역 추출기법을 제안한다. 또한 추출된 번호판 영역의 정확성을 높이기 위해서, Fast DCT를 거쳐 압축된 이미지에 대하여 Support Vector Machines(SVM)을 이용한 검증 과정을 제안한다. 제안하는 기법은 차량번호판 인식의 대상이 되는 자동차의 위치가 정면, 후면을 구분하지 않는 다양함을 가지고, 주변 배경이 충분히 포함되는 상황에서 다양한 크기를 가지는 355장의 영상들을 대상으로 한다. 실험 결과, SVM을 이용한 검증 과정을 거친 방법이 그렇지 않은 경우보다 20%이상 향상된 번호판 추출 성공률을 나타내었다.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.98-104
• /
• 2010

Rapid Prototypes with internally colored objects are convenient by visualizing. A rapid prototyping method has been developed to fabricate mono-colored or multi-colored objects. In this work, a new process was proposed that can fabricate internally visible colored 3D objects in stereolithography parts. The process consists of projection stereolithography process using transparent photocurable resin for outer shapes and molten ink deposition process using molten solid ink for internal shapes. In molten ink deposition process, molten solid ink could be deposited uniformly in a designed pattern. To make molten solid ink uniform over a designed region, parametric study through a patterning solid ink was performed. By laminating resin and solid ink in sequence, the process can make colored 3D objects in StereoLithography(SL) parts. The practicality and effectiveness of the proposed process were verified through fabrication of colored basic 3D objects in SL parts.