• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1447-1454
• /
• 2012

Recently P2P is the most popular network service on Internet and is applied various areas such as streaming, file sharing and software distribution, but there are many security threats depending on vulnerabilities by P2P network environments. Conceptually P2P network is a overlay network based on Internet, and it has security concerns of itself as well as those of Internet environments. In this paper, we analyze the vulnerabilities and threats for domestic P2P services through various experiments and describe their risk analysis. We expect that this work contributes to new domestic P2P services in consideration of service qualities and security vulnerabilities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.261-269
• /
• 2014

Most areas in Gangwon-do are mountainous regions where causes heavy damages due to landslides. It is important to analyze basic factors influencing the cause of landslides in order to prevent such landslides. For this study, a landslide occurring site is extracted from aerial images taken after the landslide caused by typhoon 'Ewiniar' in Pyeongchang area 2006. Also, the overlay analysis with the topographic, forest, and soil maps in this area is performed using GIS based methods. In addition, the topographic, forest, and soil characteristics relating to the landslide factors are analyzed. As a result, large numbers of landslides occurred at a slope angle of $20^{\circ}-40^{\circ}$. In the case of the forest factors, there are close relationships between the artificial pine and larch forests and the frequency of landslides. The low forest density represents a weakness in landslides. In the case of the soil factors, a higher level in the surface soil with a type of sandy loam soil, a higher gravel content in subsoil, and a higher degree of acid rocks in soil parent materials cause higher frequencies in landslides.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.295-300
• /
• 2001

Significant improvements in bond strength between new and existing concrete can be achieved through the modification of the new concrete by latex modification. But, no test method has been adopted as a standard to measure the bond strength between the concrete used to repair and the substrate being repaired. The performance of old and the new concrete construction defends upon band strength between old and the new concrete. Current adhesion strength measurement method is inaccurate method that ignore effect of stress concentration by shape of specimens. Therefore, this research calculates stress concentration coefficient using finite element analysis and direction tensile strength test (pull-off test). The result shows that the required core depth is 2.5 cm. Elastic modulus and overlay thickness do not influence in stress concentration.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.349-354
• /
• 2002

Significant improvements in bond strength between new and existing concrete can be achieved through the modification of the new concrete by latex modification. But, no test method has been adopted as a standard to measure the bond strength between the concrete used to repair and the substrate being repaired. The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesion strength measurement method ignores the effect of stress concentration by shape of specimens. Therefore, this research calculates stress concentration coefficient using finite element analysis and direction tensile strength test (pull-off test). The result shows that the required core depth is 2.5cm. Elastic modulus and overlay thickness do not influence in stress concentration.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.120-124
• /
• 2017

In this paper, effect of antenna diversity on pseudorandom noise (PN) code acquisition performance is analyzed and simulated for a direct sequence/code division multiple access (DS/CDMA) overlay system where a CDMA user and a narrowband user coexist in the same frequency band. From the simulation results, it is shown that the antenna diversity is very effective in improving the PN acquisition performance. The results of this paper can be applied to design of synchronization scheme for a DS/CDMA overlay environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1374-1389
• /
• 1994

In this paper, a novel M-ary orthogonal CDMA scheme which utilizes time hopping codes and binary orthogonal sequences is proposed for personal communication system. Its modulated output signal has the characteristics of greater bandwidth occupancy and lower spectral density level as well. So this scheme is useful for spectrum overlay with existing narrowband communication systems which occupy current radio frequency channels. This paper investigates system characteristics through the analysis of modulated output signal power spectrum, and demonstrates the possibility of spectrum overlay.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.268-274
• /
• 2015

Weld overlay was first used in power plants in the US in the early 1980s as an interim method of repairing the welds of flawed piping joints. Weld overlaid piping joints in nuclear power plants must be examined periodically using ultrasonic examination technology. Portable phased array ultrasonic technology has recently become available. Currently, the application of preemptive weld overlays as a mitigation technique and/as a method to improve the examination surface condition for more complex configurations is becoming more common. These complex geometries may require several focused conventional transducers for adequate inspection of the overlay, the original weld, and the base material. Alternatively, Phased array ultrasonic probes can be used to generate several inspection angles simultaneously at various focal depths to provide better and faster coverage than that possible by conventional methods. Thus, this technology can increase the speed of examinations, save costs, and reduce radiation exposure. In this paper, we explain the general sequence of the inspection of weld overlay and the results of signal analysis for some PAUT (phased array ultrasonic testing) signals detected in on-site inspections.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.151-157
• /
• 2021

Recently, IoT technology has been applied to various cloud environments, requiring accurate verification of various information generated by IoT devices. However, due to the convergence of IoT technologies and 5G technologies, accurate analysis is required as IoT information processing is rapidly processed. This paper proposes a blockchain-based multi-IoT verification model for overlay cloud environments. The proposed model multi-processes IoT information by further classifying IoT information two layers (layer and layer) into bits' blockchain to minimize the bottleneck of overlay networks while ensuring the integrity of information sent and received from embedded IoT devices within local IoT groups. Furthermore, the proposed model allows the layer to contain the weight information, allowing IoT information to be easily processed by the server. In particular, transmission and reception information between IoT devices facilitates server access by distributing IoT information from bits into blockchain to minimize bottlenecks in overlay networks and then weighting IoT information.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1141-1153
• /
• 2010

This paper introduces ONLIS(Overlay Multicast Network for Live IPTV Service), a novel overlay multicast network optimized to deliver live broadcast IPTV stream. We analyzed IPTV reference model of ITU-T IPTV standardization group in terms of network and stream delivery from the source networks to the customer networks. Based on the analysis, we divide IPTV reference model into 3 networks; source network, core network and access network, ION(Infrastructure-based Overlay Multicast Network) is employed for the source and core networks and PON(P2P-based Overlay Multicast Network) is applied to the access networks. ION provides an efficient, reliable and stable stream distribution with very negligible delay while PON provides bandwidth efficient and cost effective streaming with a little tolerable delay. The most important challenge in live P2P streaming is to reduce end-to-end delay without sacrificing stream quality. Actually, there is always a trade-off between delay & stream quality in conventional live P2P streaming system. To solve this problem, we propose two approaches. Firstly, we propose DSPT(Distributed Streaming P2P Tree) which takes advantage of combinational overlay multicasting. In DSPT, a peer doesn't fully rely on SP(Supplying Peer) to get the live stream, but it cooperates with its local ANR(Access Network Relay) to reduce delay and improve stream quality. When RP detects bandwidth drop in SP, it immediately switches the connection from SP to ANR and continues to receive stream without any packet loss. DSPT uses distributed P2P streaming technique to let the peer share the stream to the extent of its available bandwidth. This means, if RP can't receive the whole stream from SP due to lack of SP's uploading bandwidth, then it receives only partial stream from SP and the rest from the ANR. The proposed distributed P2P streaming improves P2P networking efficiency.