• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.103-109
• /
• 2013

The Present work focuses on application of Organic Rankine Cycle - Waste heat Recovery System (ORC-WHRS) for marine diesel engine. ORC and its combined cycle with the engine were simulated and its performance was estimated theoretically under the various engine operation conditions and cooling water conditions. The working fluid, R245fa, was selected for the consideration of the heat source temperature, system efficiency and safety issues. According to the thermodynamic analysis, ~13.1% of system efficiency of the cycle was performed and it is about 4% of the mechanical power output of the considering Marine Diesel Engine. Also, addition of evaporator and pre-heater were studied to maximize output power of Organic Rankine Cycle as a waste heat recovery system of the marine diesel engine.

• 신재생에너지
• /
• 제10권1호
• /
• pp.6-19
• /
• 2014

Organic Rankine cycle (ORC) has been widely used to convert renewable energy such as solar energy, geothermal energy, or waste energy etc., to electric power. For a small scale output power less than 10 kW, turbo-expander is not widely used than positive displacement expander. However, the turbo-expander has merits that it can operate well at off-design points. Usually, the available thermal energy for a small scale ORC is not supplied continuously. So, the mass flowrate should be adjusted in the expander to maintain the cycle. In this study, nozzles was adopted as stator to control the mass flowrate, and radial-type turbine was used as expander. The turbine operated at partial admission. R245fa was adopted as working fluid, and supersonic nozzle was designed to get the supersonic flow at the nozzle exit. When the inlet operating condition of the working fluid was varied corresponding to the fluctuation of the available thermal energy, optimal operating condition was investigated at off-design due to the variation of mass flowrate.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.521-529
• /
• 2012

Since the energy demand for refrigeration and air-conditioning has greatly increased all over the world, thermally activated refrigeration cycle has attracted much attention. This study carries out a performance analysis of a vapor compression cycle (VCC) driven by organic Rankine cycle (ORC) utilizing low-temperature heat source in the form of sensible heat. The ORC is assumed to produce minimum net work which is required to drive the VCC without generating an excess electricity. Effects of important system parameters such as turbine inlet pressure, condensing temperature, and evaporating temperature on the system variables such as mass flow ratio, net work production, and coefficient of performance (COP) are thoroughly investigated. The effect of choice of working fluid on COP is also considered. Results show that net work production and COP increase with increasing turbine inlet pressure or decreasing condensing temperature. Out of the five kinds of organic fluids considered $C_4H_{10}$ gives a relatively high COP in the range of low turbine inlet pressure.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.222-228
• /
• 2017

The aims of the demand response market are stabilization of the power supply and improving of the reliability of the power system. The various applications of the energy storage system (ESS) in the railway systems are studied and implemented to raise the energy efficiency. It is one of the most important how to determine the obligation reduction capacity (ORC) in participation to the demand response market because it has an influence on the profit extremely. In this paper, when participating to the demand response market with demands in the urban railway, we calculated the available ORC and economically evaluated ESS based on the real load data.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.140-145
• /
• 2014

Exploitation of renewable energies is on the increase to mitigate the reliance on fossil fuels and other natural gases with rocketing prices currently due to the depletion of their reserves not to mention their diverse consequences on the environment. Divergently, there are lots of industries "throwing" heat at higher temperatures as by products into the environment. This waste heat can be recovered through organic Rankine systems and converted to electrical energy with a waste heat recovery organic Rankine cycle system (WHR-ORC). This study uses the annual average condenser effluent from Namhae power plant as heat source and surface seawater as cooling source to analyze a waste heat recovery organic Rankine cycle using the Aspen HYSYS simulation software package. Hydrocarbon mixtures are employed as working fluid and varied in a ratio of 9:1. Results indicate that Pentane/Isobutane (90/10) mixture is the favorable working fluid for optimizing the waste heat recovery organic Rankine cycle at the set simulation conditions.

• 한국수소및신에너지학회논문집
• /
• 제31권6호
• /
• pp.637-645
• /
• 2020

In this paper, entransy analysis is carried out for combined heat and power (CHP) generation system driven by low-grade heat source compared with energy and exergy analyses. The system consists of a regenerative organic rankine cycle (ORC) and an additional process heater in a series circuit. Special attention is paid to the effects of the turbine inlet pressure, source temperature, and the working fluid on the thermodynamic performance of the system. Results showed that the work efficiency of entransy is higher than that of energy but lower than that of exergy, wheress the process heat efficiency of entransy is lower than that of energy but higher than that of exergy. Entrance analysis showed the potential to complement the exergy analysis in the optimal design of the energy system.

• 한국수소및신에너지학회논문집
• /
• 제32권1호
• /
• pp.77-85
• /
• 2021

In this paper, entransy analysis is carried out for combined heat and power (CHP) generation system driven by low-grade heat source compared with energy and exergy analyses. The system consists of an organic Rankine cycle (ORC) and an additional process heater in a parallel circuit. Special attention is paid to the effects of the source temperature, turbine inlet pressure, and the working fluid on the thermodynamic performance of the system. Results showed that the work efficiency of entransy is higher than that of energy but lower than that of exergy, wheress the process heat efficiency of entransy is lower than that of energy but higher than that of exergy. Entrancy analysis showed the potential to complement the exergy analysis in the optimal design of the energy system.

• 미생물학회지
• /
• 제45권4호
• /
• pp.354-361
• /
• 2009

본 연구의 목표는 생물담체(biocarrier)에 의한 생물접종기술(bioaugmentation)을 개발하여 원유로 오염된 해양저질의 정화에 활용하고자 하는 것이다. 몇 군데의 원유로 오염된 해안으로부터 수 가지의 분해미생물군집을 농화배양하여 평가한 결과 기능적으로 상이한 2가지의 미생물군집을 분리하였다. 이들 미생물군집을 혼합 배양한 경우 Alcanivorax sp.가 우점종을 이루는 것으로 나타났으며, 이 군집과 대나무활성탄 등을 이용하여 미생물제제(MA-2)를 제조하여 사질의 원유오염 해안토양에 처리할 경우 5주 후 산소발생제의 존재하에 90% 이상의 TPH 분해력을 나타내었다. 또한 점질의 토양도 미생물제제(MA-1)를 처리할 경우 5주 후 71% 정도의 분해율을 나타냈다. 이는 분리된 토착미생물군집을 활용하여 오염토양의 처리에 효과적으로 활용할 수 있음을 의미한다. 한편 계면활성제의 고농도의 처리는 분해미생물의 작용을 억제하므로 적절한 농도의 확인이 필요하며 점토질의 토양의 정화를 위해서는 적절한 통기를 시키는 방법(산소발생제 투여, 기계적 aeration 등)의 활용이 요구된다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.774-780
• /
• 2021

회전익 항공기의 보조동력장치(APU, Auxiliary Power Unit)는 지상 운용/비행 중 주 동력 기관의 시동, 환경제어시스템용 고압 공기 공급, 비상발전기 등의 역할을 수행한다. 보조동력장치(이하 'APU')는 소형 가스터빈엔진형태로 구성되어 있으며, 해당 구성품의 시동 원리는 전기 시동 모터를 사용하는 방식으로, 축을 회전시켜 시동에 필요한 동력을 발생시킨다. 본 연구에서는 회전익 항공기에 장착된 APU의 시동 모터 운용성 확보를 위해 APU와 APU 시동 모터 간 축간 분리 장치(Over-Running Clutch) 적용을 통한 품질개선을 수행하였다. APU 시동 모터는 초기 APU 시동이 주 역할이지만, 운용 시 실제 작동 시간 이후에도 APU 기어축의 회전력에 의해 무 부하 회전을 하게 되어 구성품/부품 간 과도한 마찰력이 지속적으로 발생하였다. 이러한 현상은 시동 모터 내부 브러시 마모를 유발하게 되고, 결과적으로 항공기 운용을 위한 APU 작동 시간 증가 시 브러시 운용 수명 감소와 APU의 운용성에 영향을 미치게 된다. 따라서 본 연구에서는 APU 시동 모터의 운용성/내구성 향상을 위하여 시동 모터 브러시 마모와 APU 작동시간의 연동성을 분리하는 축간 분리 장치(Over-Running Clutch)적용하여 시험으로 효과를 검증하였고, 설계변경에 따른 기술적 타당성을 분석하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.8-14
• /
• 2014

본 연구에서는 R-245fa를 작동유체로 하는 250kW급의 선박폐열회수 발전 시스템을 설계하고 과열기의 구성에 따른 사이클 특성을 연구 하였다. 과열기와 증발기의 직렬연결과 병렬연결의 2가지 조건을 시뮬레이션 하였다. 과열기와 증발기의 직렬연결 시뮬레이션에서는 작동유체 과열에 따른 엔탈피 증가로 4.7%의 출력상승을 얻을 수 있었고, 목표출력을 250kW로 정하였을 경우에는 사이클유량을 4.1% 감소시킬 수 있었다. 과열기와 증발기의 병렬연결 시뮬레이션에서는 사이클의 목표출력을 250kW로 정하였을 경우에 과열기로 가는 열원유체의 유량이 증가함에 따라 사이클 유량이 감소하여 작동유체펌프의 소요동력이 최대 7.9% 감소 하였으며, 유량비율에 따른 사이클효율과 정미효율은 큰 변화가 없었다.