• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.40-45
• /
• 2007

This study was performed to investigate the effect of various propeller tunnel shapes on the propulsion performance of a fishing boat. The propeller tunnel reduces the problem resulting from the open propeller accidentally catching the waste net and cable on the sea, as well as increasing the cruising speed. For 3 different tunnel geometries, the model test is conducted in the circular water channel, and the potential based panel method was applied to analyze the hydrodynamic characteristics of propeller. Also, both results are compared with each other to represent the difference between results of the model scale test and the potential theory. It is expected that these results could be referenced in the design of the propeller tunnel in consideration of the hydrodynamic interaction between the propeller and the tunnel.

• Journal of Korea Water Resources Association
• /
• v.30 no.3
• /
• pp.201-210
• /
• 1997

To analyze the flow through open-channel constrictions using $\kappa$-$\varepsilon$ turbulence mode, a numerical model is developed. The simulated results agree well with existing experimental data which attributes to the adequate input of turbulent eddy-viscosity by turbulence model. A stream function and velocity distributions enable the analysis of flow characteristics at the downstream of constriction. Turbulent eddy viscosities over channel are spatially varied with stream pattern. For the evaluation of rapidly varied flow, the eddy-viscosity input by turbulence model is required instead of the empirical effective viscosity to solve a shallow water equation.

• Ocean Systems Engineering
• /
• v.8 no.2
• /
• pp.183-199
• /
• 2018

The open source software OpenFOAM is utilised to simulate the water entry and hydrodynamic impact process of 2D wedges and ship hull sections. Incompressible multiphase flow solver interDyMFoam is employed to calculate the free fall of structure from air into water using dynamically deforming mesh technique. Both vertical and oblique entry of wedges of various dead-rise angles have been examined. A convergence study of dynamics as well as kinematics of the flow problem is carried out on successively refined meshes. Obtained results are presented and compared to the experimental measurements showing good agreement and reasonable mesh convergence of the solution.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.223-223
• /
• 2017

This study aimed to determine the effect of organic matter content and water condition in soil on yield, carbohydrate, and inulin contents of two varieties of Jerusalem artichoke. The plants were grown with high and low organic soil either under irrigation or no irrigation in a randomized complete block design (RCBD) with three replications. In result, the yield of Jerusalem artichoke was higher about 7 kg in soil with high organic matter than in soil with low organic matter, while it was higher about 11 kg under the irrigation than under no irrigation. The yield of white variety was higher about 9 kg than that of purple variety. Under the irrigation, a 12 kg and 9 kg of higher yields were observed in the soil with high and low organic matter content, respectively, than under no irrigation.

• Journal of Radiation Industry
• /
• v.18 no.2
• /
• pp.127-132
• /
• 2024

Large amounts of liquid radioactive waste or radioactive contaminated water could be produced during the treatment of radiation accidents or during the dismantling and decontamination process of nuclear power plants. Since most of the decontamination agents to date are difficult to recover after adsorption of radioactive isotopes, their use in open environments such as rivers, reservoirs, or oceans is limited. In this study, as a radioactive decontamination agent that can overcome the current limitations when used in an open environment, a paramagnetic core inorganic composite (PMCIC) decomposite agent with high selectivity to cesium ions was developed. PMCore was prepared by synthesizing paramagnetic iron oxide nanoparticles, and inorganic crystals such as metal-ferrocyanide were conjugated to the surface so that PMCore could be selective to cesium ions. The developed PMCIC could be easily recovered from the water by magnetism and could adsorb up to 94 μM of Cs atoms per 1 g of PMCIC.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.2
• /
• pp.21-29
• /
• 2016

This study conducted a basic design of system and interface which provide both of spatial and non-spatial data for water hazard information management. This helps to decide directions of the future integrated water hazard information platform and possible technical examinations of the web-based system for the realization of the prototype. For user friendly system, this study did a survey to investigate the data format, service environment, image processing level and visualization type that users prefer. Also, authorization range was set up by type of the user group. In the water hazard information platform, the data and analysis algorithm were classified by the fields. Furthermore, the platform was consisted with six block systems according to the function and the interface and designed to flexibly mount or modify the additional functions. For a basic design of the data exchange method and protocols, a prototype was constructed by using the spatial information web service technology. The portal service system to visualize and provide spatial data was designed by the WMS/WFS type of OGC standard interface and the FTP/HTTP interface type through open source GIS software for server environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.118-118
• /
• 2022

지속적인 학문의 발전을 위해서는 선행연구에 대한 재현성이 무엇보다도 중요하다고 할 수 있다. 하지만 컴퓨터와 소프트웨어의 급속한 발달로 인한 컴퓨터 환경의 다양화, 분석 소프트웨어의 지속적 최신화로 인해서 최근 구축된 모델도 짧게는 몇 달, 길게는 1~2년후면 다양한 에러로 인하여 재현성이 불가능해지고 있다. 이러한 재현성의 극복을 위해서 온라인을 통한 데이터와 소스코드의 공유의 필요성이 제시되고 있으나, 실제로는 개인마다 컴퓨터 환경, 버전, 소프트웨어 설치에 필요한 라이브러리의 버전 또는 디렉토리 등이 달라 단순히 온라인을 통한 데이터와 소스코드의 공유만으로 재현성을 개선하기는 힘든 것이 현실이다. 따라서 이러한 컴퓨터 모델링 환경의 공유는 과거의 형태와 같이 데이터, 소스코드와 매뉴얼의 공유만으로 불가능하다고 할 수 있다. 따라서 본 연구에서는 수자원 모델링의 재현성 개선을 위해 1) 온라인 저장소, 2) 클라우드기반 JupyterHub 모델링 환경과 3) 모델 APIs 3개의 핵심 구성요소를 제시하고, 최근 미국에서 개발된SUMMA(Structure for Unifying Multiple Modeling Alternative) 수자원 모델에 적용하여 재현성 달성을 위한 3개의 핵심 구성요소의 필요성과 용이성을 검증하였다. 첫 번째, 데이터와 모델의 온라인 공유는 FAIR(Findable, Accessible, Interoperable, Reusable) 원칙으로 개발된 수자원분야의 대표적인 온라인 저장소인 HydroShare를 활용하여 모델입력자료를 메타데이터와 함께 공유하였다. 두 번째, HydroShare에서 Web App의 형태로 제공되는 클라우드기반 JupyterHub환경인 CUAHSI JupyterHub(CJH)와 일루노이대학에서 제공하는 CyberGIS-Jupyter for water JupyterHub(CJW)환경에 수자원모델링 환경을 컨테이너(Docker) 환경을 통해 구축·공유하였다. 마지막으로, 클라우드에서 수자원모델의 효율적 이용을 위해 Python기반의SUMMA모델 API인 pySUMMA를 개발·공유하였다. 이와같이 구축된 3개의 핵심 구성요소를 이용하여 2015년 Water Resources Research에 게재된 SUMMA 논문의 9개 Test Cases 중에서 5개를 누구나 쉽게 재현할 수 있음을 증명하였다. 재현성의 중요성에 대한 인식의 증가로 Open과 Transparent Hydrology에 대한 요구가 증대되고 있으며, 이를 위해서 클라우드 기반의 모델링 환경구축 및 제공이 확대되고 있다. 본 연구에서 제시한 HydroShare와 같은 온라인 저장소, CJH와 CJW와 같은 클라우드기반 모델링환경, 모델의 효율적 이용을 위한 모델 APIs는 급속도로 발달하고 있는 컴퓨터 및 소프트웨어 환경에서 핵심구성요소이며, 연구의 재현성 개선을 통해 수자원공학 발전에 기여할 것으로 기대된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.165-173
• /
• 2014

Open-pit mining method, is safe relatively work as compared with underground mining. And high yield, low production cost, has the advantage that it can provide a lot of production. But deforestation, tailings and slag deposition, mineral debris, dust, water, noise, land subsidence, sediment runoff discharge, I have internalized environmental disaster predisposing factors, such as landslides. Thus, it may be noted, also by typical environmental regulations. We try to deal with the changes in open pit terrain and environment related issues. Then, use the recovery period and the open pit mine and ecology off the gun, environment-friendly development of accurate monitoring methods, systems of this development is required. The use of open platforms and open source GIS tools have been developed during this period, it needs to develop spatial information environment monitoring system open pit mine construction.

• Journal of Environmental Impact Assessment
• /
• v.12 no.5
• /
• pp.341-348
• /
• 2003

Seasonal characteristics of water quality and effect of the freshwater discharge during open the tide embankment in Haechang Bay were evaluated. In the freshwater, where interior of the tide embankment, COD and Chl-a exceeded about 4mg/L and $10mg/m^3$, respectively, independent of season, while in the seawater they showed high values in April and July in contrast to the other period due to input of freshwater and increase of phytoplankton, respectively. The content of seawater inorganic nitrogen maintained a relatively high level at inner part of the bay, whereas high values of inorganic phosphorus content was distributed at all over the bay. The limiting factor for algal growth was nitrogen with respect to the N/P ratio. The compass of influence by the freshwater discharge in April was quite different with water pollutants. As a result of the salinity variation with time, the freshwater extended strongly to offshore from the surface layer without mixing with depth when open the tide embankment, and reached within about one hour at a station which is 3.5km from the tide embankment. To effective water quality management of Haechang Bay, discharge rate and pollutant loads should be controlled.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.12
• /
• pp.581-586
• /
• 2017

This paper proposes a GPU based water surface animation and rendering technique for interactive applications such as games. On the water surface, a lot of physical phenomenon occurs including reflection and refraction depending on the viewing direction. When we represent the water surface, not only showing them in real time, but also make them adjusted automatically. In our implementation, we are able to capture the reflection and refraction through render-to-texture technique and then modify the texture coordinates for applying separate DU/DV map. Also, we make the amount of ratio between reflection and refraction change automatically based on Fresnel formula. All proposed method are implemented using OpenGL 3D graphics API.