• Title/Summary/Keyword: OOK-CDMA

Search Result 4, Processing Time 0.019 seconds

Performance of VLC-CDMA Communication System Using LED (LED를 이용한 VLC-CDMA 통신 시스템 성능 분석)

  • Bae, Su-Jin;Hong, Yeong-Jo;Lee, Kye-San
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.2
    • /
    • pp.83-90
    • /
    • 2009
  • White LEDs(Light Emitting Diode) offer advantageous properties such as high brightness, improved reliability, lower power consumption, and long lifetimes. An LED is an electronic device that converts an electrical signal into a tight signal and is used not only in Optical Communication Indoor wireless optical illuminating rooms, but also for wireless optical communication systems. Currently, studies about these white LEDs have been being progressed, and in this raper, we discuss the multiplex and the multiple access method of VLC(Visible Light Communication) systems using white LEDs. In proposed system, CDMA(Code Division Multiple Access) apples to VLC system to reduce interference of VLC system, and improve capacity. The superiority of OOK modulation is presented in analysis of results by comparing VLC-CDMA communication system using OOK(On-off keying) modulation and BPSK modulation in AWGN(Additive White Gaussian Noise) channel and Diffuse channel. And we investigate the significance of a solution of interference by multipath by comparing BER in multipath channel and AWGN channel. In the proposed system, we assume Directed LOS(Line Of Sight) and Diffuse Link, and suppose VLC-CDMA using OOC(Optical Orthogonal Code) as methods to increase efficiency of system by removing ISI(Inter Symbol Interference) caused by multiple access, optical spreading code, and also present an analysis of its performance.

  • PDF

A Study of applying Method of Unipolar-ZCD Spreading Code for LED-ID in Interference Environment (LED-ID용 간섭채널환경하에서의 단극형 ZCD확산코드 적용 기법에 관한 연구)

  • Cha, Jae-Sang;Kim, Jin-Young;Jang, Yeong-Min;Kim, Jong-Tae;Lee, Kyong-Gun;Moon, Kyung-Hwan
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.6
    • /
    • pp.275-280
    • /
    • 2010
  • Recently, This paper suggests that LED-ID technique applying positioning method for LED light. also, Authors in this paper has launched this investigation earnestly. However, there are various interferences such as MPI(Multi Path Interference) by reflected waves of the surface and interfere factors by their correlation properties of the ID in LED-ID wireless channel. Therefore, in this paper, we propose a novel OOK(On-Off Keying)-CDMA(Code Division Multiple Access) system using unipolar ZCD(Zero Correlation Duration) spreading code and verify the availability of the proposed system via the evaluation performance simulation.

A 3.3V 30mW 200MHz CMOS upconversion mixer using replica transconductance (복제 V-I 변환기를 이용한 3.3V 30mW 200MHz CMOS 업 컨버젼 믹서)

  • Kwon, Jong-Kee;Kim, Ook;Oh, Chang-Jun;Lee, Jong-Ryul;Song, Won-Chul;Kim, Kyung-Soo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.9
    • /
    • pp.1941-1948
    • /
    • 1997
  • In this paper, the power efficient linear upconversion mixer which is a functional circuit in transmit path of intermediate frequency(IF) part of Code Division Multiple (CDMA) cellular phone was explained. In generally, the low CMOS devices limits the implementation of upconversion mixer especially for lower loads. Using replica transconductor, the linear range is extended up to the limit. Thiscircuit was imprlemented using $0.8{\mu}\textrm{m}$ N-well CMOS technology with 2-poly/2-metal. The active area of chip is $0.53mm{\times}0.92mm$. The power consumption is 30mW with 3.3V suply voltage. The 1dB conpression characteristics is -27.3dB with $25{\Omega}$. load and being applied by 2-tone input signal. The mixer operates properly above 200MHz.

  • PDF

High Speed Identification Method of RFID Tag (RFID 태그의 고속 인식 기법)

  • 이광재
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.1
    • /
    • pp.6-12
    • /
    • 2004
  • Identification rate and time are very important in the identification of RFID tag, and the tag requires simple structure to use economically large quantity of tags. These factors make the MAC protocols of wired or wireless network environment result in different requirements. In the paper, we propose a method to apply spread spectrum scheme using orthogonal channel via Walsh function as the anti-collision communication system for the purpose of non-collision identification of multiple tags, and consider its property. The proposed system use two step identification. in the first step, collision is resolved via constructing to respond after specific delay time based on unique n, and conventional polling scheme follows in the second step.

  • PDF