• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.106-113
• /
• 2011

We describe a single shot off-axis digital holography based on a Mach-Zehnder interferometic scheme for measuring temperature distribution of a microheater. The proposed scheme has the capability of reconstructing object phase image which is dependent of the temperature distribution in real time. Experimental results shows that there is a moderate linear relationship between the measured phase and temperature in the range of $20^{\circ}C$ to $60^{\circ}C$. We expect that the proposed system can provide a very reliable and fast solution in various surface temperature distribution measurement applications.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.34-41
• /
• 2015

Bonding strength of a thermal sprayed coating is difficult to measure using a conventional pull-off test method. Scratch test is a potential alternative testing method. An adhesive and a cohesive bond strength of the coating can be measured by the pull-off test while the scratch test performed on the cross-section of the thermal sprayed coating can only demonstrate the cohesive bond strength of the coating. Nevertheless, it is still beneficial to perform the scratch testing on the cross-section of the coating for the sake of comparison thus providing an alternative to the pull-off test. The scratch test method can reduce testing time and cost in the long run due to a significant cost reduction in consumables and energy and time saving from the curing step of the glue used in the pull-off test. This research investigates the possibility of using the scratch test to measure the cohesive bond strength of Mo/NiCrBSi composite coating. The results from the pull-off test and the scratch test indicate that the cohesive bond strengths of the Mo composite coating show similar trend and that the cohesive bond strength are increased when increasing NiCrBSi content.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2E
• /
• pp.47-54
• /
• 1997

This paper presents two results on intersymbol interferences in baseband digital communication over an additive white Gaussian noise channel-the interferences due to mismatched square-root raised-cosine filters, in which the filters have different roll-off factors, and / or due to sampling-time jitter. The result for the mismatched filters is that even the jitter-free sampling causes intersymbol interference and it is negligibly small for a wide range of signal-to-noise ratio up to 10dB, for the roll-off factor ranging from 0.2 to 0.5, the mismatch loss being within 0.1dB from the optimum at around 10-6 .For jitter interference an approximation formula for the bit error probability is derived in case of the matched filters, which shows how the roll-off factors and the amount of jitter affect the system performance. The formula is reasonably accurate.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.39-46
• /
• 2018

Departure Manager (DMAN) is a tool to optimize the departure sequence and to suggest appropriate take-off time and off-block time of each departure aircraft to the air traffic controllers. To that end, Variable Taxi Time (VTT), which is time duration of the aircraft from the stand to the runway, should be estimated. In this paper, a study for development of VTT prediction algorithm based on machine learning techniques is presented. The factors affecting aircraft taxi speeds were identified through the analysis of historical traffic data on the airport surface. The prediction model suggested in this study consists of several sub-models that reflect different types of surface maneuvers based on the analysis result. The prediction performance of the proposed method was evaluated using the actual operational data.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.205-214
• /
• 2001

As the real time multimedia data service has become available due to the rapid progress of computer and Internet technology, the users can enjoy the newly developed service, which is called Video On-Dem-and(VOD). However, most of service providers have not paid their attention much on the software for various service modes on VOD, but they are only concentrating un the hardware to provide with the high resolution video display. Therefore, the service providers are recently to pay more attention on the software to cope with the various demands of users than hardware. So this paper has designed and implemented the VOD service system for those demands. Since the VOD service system suggested by this paper enable off-line search functions through E-mail, the users can possibly get the necessary information from off-line Search without connecting to the server while the current VOD service can prominently help users to save the time and effort to sea고 and select the Video contents by using periodical current awareness service supported by PUSH technology and user oriented information booking and feedback service supported by SDI service.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.721-724
• /
• 2010

In a network router, packet loss may occur when it overflows due to sudden burst traffic. This paper studies how much large buffers are required to eliminate the packet losses. There are buffers on which packet arrive and one output port to which a packet is transmitted at a time. The buffer management algorithm should determine one of the buffers whose packet is transmitted to the output port at each time. The front packet belonging to the buffer determined by the algorithm is transmitted. The goal is to minimize the sum of the lengths of buffers to transmit all the packets. We provide an optimal off-line algorithm and also we show the lower bounds of on-line algorithms. The on-line algorithm has no prior information of the packets having arrived in the future. Its performance is compared to that of the optimal off-line algorithm.

• 전기의세계
• /
• v.17 no.2
• /
• pp.6-10
• /
• 1968

The conversive limitation of electric energy for the thyristor inverter is analysed under the boundary conditions which the term of a negative inverse voltage is longer than that of the turn off time of the thyristor under commutation. It is clear that the maximum electric energy conversion is affected by the turn off time of the thyristor, the reactance of a commutation reactor, the capacity of a commutation condenser and the voltage of Direct current source. It is useful for design the thyrister invertor and the motor speed control to apply the above conclusion.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.35-38
• /
• 1998

In this paper, we present a new SVPWM strategy for a 3-level inverter. This SVPWM method is easily implemented without switching table like SVPWM. In addition, with proposed method, we can also keep the voltage balancing of DC-link capacitors and guarantee minimum on/off time of the devices. The principle of the proposed SVPWM method is described in detail, and its implementation method is also proposed. The usefulness of the proposed SVPWM method is verified through the simulation using MATLAB/Simulink.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.1
• /
• pp.35-40
• /
• 1999

We selected horse mackerel Trachurus japonicus, mackerel Scomber japonicus and arrow squid Todarodes pacificus, to use in the experiment. These fishes migrate to the Cheju coast and were caught by set-net. We studied the leading effect on the fish schools using the attracting lamps in an outdoor water tank at the Marine Research Institute in Cheju National University. The results obtained are summarized as follows; 1. The attracting rate of fish schools was increasing as the time between switching on and off each lamp was getting longer when each of the attracting lamps was switched on and off in order. However, the attracting rate of mackerel school showed a tendency to be higher than that of the other two species. 2. The attracting rate of fish schools was increasing as the time of switching off the lamps was getting longer when the attracting lamps which had been switched on were switched off in order. However, the attracting rate of mackerel school showed a tendency to be higher than that of the other two species. 3. The attracting rate of fish schools was decreasing as the speed of moving the attracting lamp was getting faster when the attracting lamp was moving. However, the attracting rate of mackerel school showed a tendency be higher than that of the other two species. 4. To determine the distance between the attracting lamps, there would be two methods. One is switching on and off the attracting lamps in order, and the other is switching off the attracting lamps in order which had been switched on. The methods showed that the attracting rate of fish schools were decreasing as the distance between the attracting lamps were getting longer. However, the attracting rate of mackerel school showed a tendency to be higher than that of the other two species.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.997-1005
• /
• 1998

This paper presents a modified on-off algorithm based on the gradient method for providing the phase of each antenna element more accurately and simply compared to the conventional on-off algorithm. The sup4erisority of theproposed method is due to the fact that the proposed method finds the increase and decrease of the array output power more accurately by utilizing the gradient of array output power with respect to the instantaneous phase of array element. The array antenna adopting to the proposed method formsmaximum beam-pattern along the direction of the desired signal by aligning the phase of every antenna enement. The proposed method is applied to both linear and two-dimentional aray for analyzing the result. The capability of the real-time processing of the proposed technique is confirmed by implementing the proposed algorithm with TMS320C30 Evaluation Module. Since the computational load required to form the beam-pattern per snapshot is small, the proposed method is suitable for the mobile communication system of which the response must be fast. By the results obtained from the application of the proposed method to the CDMA mobile communication environment, it is vreified that the performance of the received signal is consideralbly improved.