• Journal of radiological science and technology
• /
• v.2 no.1
• /
• pp.71-83
• /
• 1979

Not only the insulating oil used for extra high voltage and high capacity transformer has a lot of possibilites of a corona discharge in oil, but the oil is easily degraded by a response of light oxidization. This study is either to classfy, with priority given to a transformer oil produced in Korea belonging to, the insulating oil No. 2, the sample irradiated the ultraviolet rays, treated a corona discharge in oil by a high voltage DC source and done nothing, or to measure the characteristics of breakdown, V-i, I-t and electrode material. The obtained results can be summarized as followings: (1) Unless the sample is contacted with the air, on the process to irradiate the ultraviolet rays, the sample less influence on the changes of the electric characteristics. At the same time, if the sample is contacted with the air and irradiated the ultraviolet rays, the sample shows a remarkable changes of the electric characteristics, and a declined breakdown strength. This tells us that the influence of the light irradiation must be considered as a primary factor of degrading the insulating oil. (2) In the oil treated by a corona discharge, breakdown voltage is declined more than in the oil not to be treated with it. This means that the degradation of the insulating oil is getting increased by a corona discharge in oil. (3) It shows that the increase of conducting current has little to do with breakdown voltage. (4) The conducting current depending on the electrode materials can be put in order by value as Al>Cu>Fe. This is due to the differences of the work function of each metals, and an chemical reaction with the insulating oil. These result can be a great help in verifying the degradation progress of the insulating oil and furnish a new technical information to the manufacturers of the insulating oil and electrical equipment designers and operators. Besides, this study would be helpful to improve the electrical characteristics of the insulating oil produced in Korea.

• Reproductive and Developmental Biology
• /
• v.38 no.3
• /
• pp.93-98
• /
• 2014

The objective of this study was to investigate the changes of oxidative stress and antioxidant enzyme during in vitro development with washing culture oil in porcine embryos. During the culture, the four types of culture oil such as paraffin oil with or without washing and mineral oil with or without washing were examined. The oil was washed with PZM-3 during 7 days and collected oil only. The embryos were stained with CellTracker$^{TM}$ Red, DCFDA and Hoechst 33342 to confirm the effects of the oil. As a results, Cleavage rates and total cell number were no difference among the four oil groups. However, ${\geq}16$ cell embryos were significantly different in fore type oil treatment and blastocyst rate was significantly higher washing paraffin treatment than in other group(p<0.05). Also, the expression of free radical were lower in washing paraffin oil than in other groups (p<0.05). On the other hand, the expression of glutathione were not significant different among paraffin oil with or without washing and mineral oil with or without washing, however washing paraffin oil and washing mineral groups were higher than other treatment groups. In conclusion, the washing oil was expected with positive effects on in vitro development in porcine embryos.

• Journal of Aquaculture
• /
• v.5 no.2
• /
• pp.157-165
• /
• 1992

Experiments were conducted to find out suitable dietary lipids in the practical feed for Nile tilapia, Oreochromis nilotius. Soybean oil, corn oil, fish oil or cuttlefish liver oil was mixed in the diet and tested. The best weight gain and feed efficiency were obtained from the fish fed soybean oil or corn oil, both rich in 18 : 2n-6. But the growth rate of fish fed diet with fish oil or cuttlefish liver oil were inferior. The levels of 20 : 3n-9 in the total lipid were not different in all tested lipids, but that in the polar lipid of the fish oil or cuttlefish liver oil were lower than that in the soybean oil or corn oil. Thus, vegetable oil such as soybean oil or corn oil, rich in 18 : 2 n-6, were suitable as dietary lipid for Nile tilapia. Unlike other fish species, fish oil or cuttlefish liver oil showed no essential dietary value for this species.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.152-160
• /
• 1997

A diesel engine oil which was formulated and a commercial diesel engine oil (API CG4) made from same base oil were tested by car and analyzed of their physical, chemical and mechanical properties. The tested oil to be analyzed were sampled from engine every 1000 km until 8000 km and determined the kinematic viscosity, TAN, TBN, metal content in oil, additive depletion, antiwear property and IR analysis. From the study, both the tested oils were almost same properties for the change of TAN and TBN, but the change of kinematic viscosity of formulated oil was slightly higher than that of commercial oil. But the concentration of metal in the formulated oil, especially iron, were increased much less during test. The iron content of the commercial oil was increase rapidly from 7000 km while the formulated oil was still low. These results were conformed by the antiwear test by 4-ball wear test machine for the samples. Also for the commercial oil, the depletion factor of the Zn-DTP which was added as an antiwear property was not change any more after 7000 km. But the formulated oil was change continuously until 8000 km, which mean that the ability of wear protection of the sliding parts exists for the formulated oil. With the results which were analyzed of the properties of oils by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil can use more than 8000 km without severe wear of the sliding parts in the diesel engine.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.418-429
• /
• 1992

Recently, many researchers make a great effort to develop high efficient marine diesel engines using low grade heavy oil, and also study substitution fuel oil for engines and boilers. In case of Fisheries Vessels, we need to know that fish oil can be substituted for fuel oil. Therefore, it is studied that evaporation, ignition and combustion phenomena of the single droplet of fish oils (i.e., Sardine fish oil, File fish oil and Alaska pollac oil) on heated plane surface to evaluate appropriateness as substitution oil. Methanol and light oil are tested simultaneously to help the evaluation on these Fish oils. The results are summarized as follows: 1. The type of evaporation and combustion is spherical evaporation in case of methanol and light oil. And fish oil blended with light oil was finished after spherical evaporation happen when high temperature. 2. Ignition of Pure fish oil was shorter than that of fish oil blended with light oil. 3. Heat transferred to droplet could make qualitative comparison by contact diameter of droplet with hot surface as time changes. Life time of droplet according to the change of heated surface temperature was greatly influenced by droplet contact condition on the heated surface. 4. As far as combustion phenomena was concerned, apparent diameter of the fish oil droplet increased after ignition and decreased suddenly by internal boiling of droplet. 5. Three fish oils had similar phenomena on the evaporation, ignition and combustion. 6. Evaporation and combustion feature of fish oil could not be shown by coefficient of evaporation velocity of droplet and coefficient of combustion velocity of droplet.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.481-488
• /
• 2000

This study was initiated in order to find alternative fuel substituting for light oil the most common fuel for heating greenhouse. The tire oil used in this research was produced by pyrolysis process, one of the final products besides steel string and carbon black in which waste tires as a form of chopped pieces broken by shredding machine are heated up to 200~30$0^{\circ}C$ with maximum restraining of oxygen supply. In order to justify light oil equivalent qualities in tire oil combustion characteristics were defined in the way of comparing kinetic viscosities in the wide range of temperature flame sizes and exhaust gas components in the various combustion conditions. We found that kinetic viscosity of tire oil was lower than light oil by 1 to 2 cSt in the temperature range showing better flowing mobility in the fuel line of the burner and no significant difference in flame size between the two oils in the all combustion treatments. However much more NO and SO$_2$ were detected from the exhaust gases of tire oil than light oil combustions. In fact tire oil contains more nitrogen and total sulfur, by 25 times and 40 times respectively than light oil according to the composition analysis. Tolerable limit for SO$_2$discharge amount defined by the national air pollution standards is under 540ppm so tire oil combustion satisfies the requirement though. It is desirable if sulfur and nitrogen filtering process shall be added in the tire oil production line. Except the exhaust gas components all greenhouse heating qualities of tire oil including hot air temperature are very identical to those of light oil.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2016

Purpose: Mee (Madhuca longifolia) is an economically important tree growing throughout Sri Lanka. Its importance is mainly attributed to its oil with high nutritional and medicinal values. However, an inefficient extraction method limits its use. This study revealed the possibility of extracting oil from mee seeds by using a screw-type oil expeller. Methods: A popular screw-type oil expeller was used in the experiment. Extract bar clearance and speeds of the main spiral shaft were altered to increase the oil expelling efficiency of the machine. The quality of refined oil at the optimum oil yield was determined by measuring the refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity. Results: An optimum yield of 35% oil was obtained when the machine capacity was 30 kg/h and energy consumption was 0.13 kWh/kg. This optimum machine condition was observed at an extract bar clearance of 0.5 mm and a main spiral shaft speed of 90 rpm. The refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity of the oil were 1.4, 203, 59, 3.5%, 0.2%, and 0.907 g/cm3 respectively. Color of the mee oil was closer to yellow, which is revealed by the lightness value (L) of 24.93 and positive value (b) of 11.81. Conclusion: The screw-type oil expeller can be used for economically extracting mee oil on a commercial scale.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.193-200
• /
• 2016

Purpose: New low-cost oilseeds are needed to meet an ever-increasing demand for oil for food, pharmaceutical, and industrial applications. African oil bean seed is a tropical crop that is underutilized and has high oil yields, but there have been no studies conducted on its mechanical oil expression up to now. The objective of this work was to investigate the effect of moisture content and seed dimensions on mechanical oil expression from the seeds. Methods: Fresh oil bean seeds were procured, de-hulled, and cleaned. Initial seed moisture content, obtained in accordance with the ASAE standard, was 12% dry basis (db). The seeds were further conditioned by dehydration and rehydration prior to oil expression to obtain four other moisture levels of 8, 10, 14, and 16% db. The major diameter of the seeds was measured using digital vernier calipers, and the seeds were classified into size dimensions (< 40, 41-45, 46-50, 51-55, and > 55 mm). The oil yield and expression efficiency were obtained in accordance with standard evaluation methods. Results: The highest oil yield and expression efficiency (47.74% and 78.96%, respectively) were obtained for a moisture content of 8% db and seed dimensions of < 40 mm, while the lowest oil yield and expression efficiency (41.35% and 68.28%, respectively) were obtained for a moisture content of 14% db and seed dimensions between 51-55 mm. A mathematical model was developed to predict oil yield for known moisture content and seed dimensions, with a coefficient of determination $R^2$ of 95% and the confidence level of the predictive model of 84.17%. The probability of prediction F ratio showed that moisture content influence was more significant than seed dimensions. Conclusions: The higher the moisture content and larger the seed dimensions, the lower the oil yield from African oil bean seeds.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.2
• /
• pp.7-10
• /
• 1993

This study was carried out to investigate the effect of silicone oil on preventing deterioration of oil in frying potatoes. The results obtained are summarized as follows: 1. Frying potatoes in oil, the oil added silicone oil slowly increased acid value, dielectric constant and decreased smoke point as compared with the oil without silicone oil. In the early stage of frying, there was on difference in deterioration degree of the frying oil between 1ppm and 10ppm addition of silicone all. But as frying time prolonged, the higher silicone oil was added. the more stable in deterioration of frying oil. 2. When silicone oil was added at the level of $1{\sim}10ppm$ into the oil for frying potatoes. it was possible to prevent deterioration of the frying oil.

• The Journal of Fisheries Business Administration
• /
• v.33 no.1
• /
• pp.43-68
• /
• 2002

In the fisheries industry, the cost of oil Is the greatest factor, contributing 25% 40% of the cost of production. In order to support fisheries, the government has supplied large amounts of money for oil to the fisheries industry. However, the elimination and restriction against the subsidy of fisheries has been actively discussed throughout international organizations Including the WTO. The purpose of this thesis is to study the existing issue of subsidies on the fisheries Industry, which is currently disputed in international organizations, and predict a future policy about the oil supply that considers the most important factors on fisheries. In chapter 2, the paper begins by outlining the tendencies of discussion in relation to the subsidy on fisheries among international organizations, and categorizes them on the basis of their types. Chapter 3 defines the current conditions and characteristics of the Korean subsidy on fisheries and analyzes which portions of the subsidy on fisheries should be eliminated first when it is prohibited. In chapter 4, procedures and problems for producing tax-free oil are discussed, because tax-free oil has a higher possibility of being ruled out. Chapter 5 proposes a reasonable plan concerning oil supply policies for maintenance or enrichment of the fishing industries, post the elimination of subsidies. Conclusions were drawn in eight areas as a result of this study: 1) securing the large storage of oil, 2) extending customers of oil to include non-fishermen, 3) coordinating the segmentation of marketing area, 4) diversification of the sales goods, 5) producing oil sales experts, 6) developing original brands, 7) expanding the purchasing area to buy oil in the international market, and 8) operating funds to stabilize oil price. It would not be appropriate to wait until international organizations decide to ban the subsidy of fisheries. Corresponding plans ( such as securing the large storage of oil) tend to be large scale and long-term projects because they take a number of years, from designing the oil storage tank to selecting the proper region and initiating the construction. Therefore, it is strongly suggested that any extensive and time consuming projects including preparation for the tax-free oil should be completed in new actions before the ban by the international organizations.