• 대한가정학회지
• /
• 제18권3호
• /
• pp.5-11
• /
• 1980

The study carried out to clarify the effects of lard and corn oil on serum total cholesterol content and liver thiobarbituric acid (TBA) value in ethanol (Et-OH) fed mice. Results obtained from the present study were a follows: 1. serum total cholesterol content was considerably increased by 25% Et-OH administration in mice. In case of 25% Et-OH plus Lard group and Lard group both group were also increased significantly to compare with normal value of mice but 25% Et-OH plus lard group was shown very higher value rather than that of Lard group and Lard group was found similar tendency to compare with the 25% Et-OH plus saline group except to after the 1 day. 2. serum total cholestrol content of 25% Et-OH plus Corn oil group and corn oil group were also increased significantly to compare with normal value, but the 25% Et-Oh plus Corn oil group slightly higher level than that of Corn oil group except to after the 3 days. 3. Lard group was also very similar tendency to compare with the corn oil group except to the 3 days. 4. liver TBA value was increased by 25% Et-OH fed mice. 25% Et-OH plus Lard group and Lard group were also increased significantly to compare with liver TBA value in normal mice, but 25% Et-OH plus Lard group was found higher value rather than that of lard group and 25% Et-OH group (Control). Lard group was similar to that of Control group except to after the 1 day. And 25% Et-OH plus Corn oil group was considerably increased rather than that of Control group, and liver TBA value of the above group was similar to that of 25% Et-OH plus Lard group except to after the 3 days. Corn oil group was shown lower value than that of lard group, but it was no significant.

• 한국가스학회지
• /
• 제5권4호
• /
• pp.79-84
• /
• 2001

본 연구에서는 폴리올의 구조(OH-value, functionality)와 각각의 발포제(CFC-11, HCFC-l4lb, HFC-365mfc)가 우레탄의 반응성, 폼의 물성 그리고 cell 구조에 미치는 영향을 평가하여 HFC-365mfc의 대체 가능성을 고찰하였다. 그 결과 폴리올의 OH-value와 작용기가 증가함에 따라 반응온도, 반응속도, 밀도 그리고 압축강도는 증가하였다. Cell의 크기는 폴리올의 OH-value와 작용기가 커질수록 미세하게 형성되었다. CFC-11 HCFC-l4lb 그리고 HFC-36smfc에 따른 반응온도, 반응속도, 밀도 그리고 압축강도의 변화는 거의 없었으며, cell 분포는 HFC-365mfc를 사용한 경우가 HCFC-l4lb를 사용한 경우에 비해 균일한 cell 분포를 나타내었다.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.115-123
• /
• 2003

Simultaneous measurements of velocity and OH distribution were made using particle image velocimetry(PIV) and planar laser-induced fluorescence(PLIF) of OH radical in turbulent hydrogen nonpremixed flames with coaxial air. The OH radical was used as an approximate indicator of chemical reaction zone. The OH layer was correlated well with the stoichiometric velocity, $U_s$, instantaneously and on average. In addition, high strain-rate regions almost coincide with the OH distribution. The residence time in flame surface, calculated from the root-mean-square value of the radial velocity, is proportional to $(x/d_F)^{0.7}$. It is found that the mean value of principal strain rate on the OH layer can be scaled with $(x/d_F)^{-0.7}$ and therefore, the product of the residence time and the mean strain rate remains constant over all axial positions.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.18-26
• /
• 1997

Polyester microfiber fabrics were decomposed at 100, 110, and 12$0^{\circ}C$ in saturated CaO/ethylene glycol solutions(CaO/EG), and the characteristics of decomposition kinetics were discussed in comparison to those by hot aqueous hydroxide solution(NaOH). The Arrhenius pre-exponential factor(A) was 9.17x $10^{14}$/M $sec^{-1}$and the activation energy($E_{a}$) was 8.19kcal/mol. While the A value was 1.947x $10^{14}$/M $sec^{-1}$ and the ($E_{a}$ value was about 15~19kcal/mol in NaOH-PET decomposition reaction. The much higher A value of the CaO/EG-PET decomposition reaction means that CaO/EG-PET decomposition reaction will occur in a less selective fashion in comparison to the NaOH-PET decomposition reaction. On the other hand, the lower ($E_{a}$) value of the CaO/EG-PET decomposition reaction than that of the NaOH-PET decomposition reaction means that CaO/EG-PET decomposition reaction is less sensitive on the variation of temperature than NaOH-PET decomposition reaction.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.189-189
• /
• 1982

This study was carried out to determine the possibility of making fiberboard through the dry forming process, utilizing the tannin-like material of the Asplund pulp from the silk worm oak as a binder. The fiberboard was made through paraformaldehyde treatment, spray of NaOH solution and adjustment of mat moisture content, by hot-pressing at $220^{\circ}C$, and 50-6-50kg/$cm^2$ pressure with 6-min. (0.6-1.8-3.6) three-stage pressing cycle. The results are summarized as follows: 1. The modulus of rupture value of fiberboard treated with NaOH solution was greater than that of untreated. The value was increased in proportion to the paraformaldehyde content from I to 5%, but there was no increasing between 5 and 7% paraformaldehyde content. The value became higher along with the increase of mat moisture content from 15% to 25%. 2. The water adsorption of fiberboard treated with NaOH solution was lower than that of untreated. The value was de"creased in proportion to the paraformaldehyde content from 1 to 5%, but there was no decreasing between 5 and 7% paraformaldehyde content.. 3. A good quality fiberboard (modulus of rupture value of about 250kg/$cm^2$) was made through 5% paraformaidehyde treatment and 3% treatment of 10% NaOH solution, when the mat moisture content was 25%. was 25%.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.513-520
• /
• 2016

The effect of NaOH concentration on the properties of electrolytic plasma processing (EPP) coating formed on AZ61A Mg alloy is studied. Various types of EPP were employed on magnesium alloy AZ61A in a silicate bath with different concentrations of NaOH additive. Analysis of the composition and structure of the coating layers was carried out using an X-ray diffractometer (XRD) and a scanning electron microscope (SEM). The results showed that the oxide coating layer mainly consisted of MgO and $Mg_2SiO_4$; its porosity and thickness were highly dependent on the NaOH concentration. The Vickers hardness was over 900 HV for all the coatings. The oxide layer with 3 g/l of NaOH concentration exhibited the highest hardness value (1220 HV) and the lowest wear rate. Potentiodynamic testing of the 3 g/l NaOH concentration showed that this concentration had the highest corrosion resistance value of $2.04{\times}10^5{\Omega}cm^2$; however, the corrosion current density value of $5.80{\times}10^{-7}A/cm^2$ was the lowest such value.

• 한국초지조사료학회지
• /
• 제20권3호
• /
• pp.155-160
• /
• 2000

This syudy was conducted to increase the utility of forage rye which are suitable to be cultivated at high altitude Taekwllyong area. For that purpose two cultivars of rye (winter-more, kool-glazer) were cultivated for 3years using a randomized block design with 3 replications. The dry matter digestibility (DMD) was evaluated with the pelleted rye hay produced by adding sodium hydroxide and then the TDN value was calculated by the DMD. By adding NaOH, DMD and TDN value of rye pellets (Y=46.92+ 1.8X, ~ 0 . 9 7 )w ere increased significantly (p<0.05) and NDF (neutral detergent fiber) decrease significantly. However, ADF (acid detergent fiber) and lignin did not significantly decrease (p<0.05). Rye could be cultivated as a second crop after com at high altitude area in the same year and pelleted with NaOH in order to increase the nutritive values (p< 0.05). (Key words : Dry matter digestibility (DMD), Forage rye, NDF, ADF, Sodium hydroxide)

• 한국환경과학회지
• /
• 제13권1호
• /
• pp.79-87
• /
• 2004

Esterification of soybean oil with methanol was investigated. First of all, liquid-liquid equilibriums for systems of soybean oil and methanol were measured at temperatures ranging from 40 to 65$^{\circ}C$. Profiles of conversion of soybean oil with time were determined from the glycerine content in reaction mixtures for the different kinds of catalysts, such as NaOH, CaO, Ca(OH)$_2$, MgO, Mg(OH)$_2$, and Ba(OH)$_2$. The effects of dose of catalyst, cosolvent and reaction temperature on final conversion were examined. Esterification of waste vegetable oil with methanol was investigated and compared to the case of soybean oil. Solubility of methanol in soybean oil was substantially greater than that of soybean oil in methanol. When the esterification reaction of soybean oil was catalyzed by solid catalyst, final conversion was strongly dependent on the alkalinity of the solid catalyst, and increased with the alkalinity of the metal. Hydroxides from the alkali metals were more effective than oxides. When Ca(OH)$_2$ was used for the esterification catalyst, maximum value of final conversion was measured at dose of 4％. When CHCl$_3$ as a cosolvent, was added into the reaction mixture of soybean oil which catalyzed by Ba(OH)$_2$, maximum value of final conversion was appeared at dose of 3％. When waste vegetable oil was catalyzed by NaOH and solid catalysts, high final conversion, over 90％, and fast reaction rate were obtained.

• Journal of Radiation Protection and Research
• /
• 제1권1호
• /
• pp.15-21
• /
• 1976

본 연구는 무단체 Pm-147 의 농도 및 pH 변화에 대하여 여과과정에서 막여과지(膜濾過紙)에 대한 흡착(吸着)상태를 조사하여 무단체 Pm-147의 용액(溶液)상태에 있어서 화학적(化學的)상태 및 흡착(吸着)상태에서의 Pm-147 의 화학적 상태에 관하여 연구하였다. 이와 아울러 방사능(放射能)물질의 담체(擔體)로 사용되는 $Fe(OH)_3$와의 공심(共沈)상태를 연구하였다. 무단체 Pm-147 수용액(水溶液)에서 $Pm^{3+}$ 상태로 족재하며 막(膜)여과지에 의한 여과과정에서 흡착(吸着)이 일어난다. 흡착상태(吸着狀態)는 pH에 따라 여러가지 이온상태로 존재하고 있다. 즉 pH 5.0까지는 $Pm^{3+}$ 상태로 존재하며 $pH5.0{\sim}6.0$까지는 점차로 $Pm(OH)^{2+}$ 상태로 옮아가며 pH 6.0 이상에서는 $Pm(OH)^{2+}$에서 $Pm(OH)_2^+$, $Pm(OH)_3$ 상태로 흡착(吸着)상태로 흡착상태가 이동한다. $Fe^{3+}$와 $Pm^{3+}$의 공심(共沈)은 $F(OH)_3$에 대한 $Pm^{3+}$의 흡착이며 높은 pH 및 Fe 담체(擔體)의 양(量)에 따라 $Pm(OH)^{2+}$ 및 $Pm(OH)_2^+$등의 상태로 나타나고 있다.

• 대한환경공학회지
• /
• 제38권8호
• /
• pp.428-434
• /
• 2016

본 연구에서는 하수 내 인 제거 시 티타늄계열 응집제의 인 제거특성을 알아보기 위해 알루미늄계열 응집제와 비교하였다. Jar-tester를 이용하여 다양한 OH/Ti 몰비(B값)의 응집제를 투여하여 실험을 진행하였다. 초기 인 농도가 증가할수록 처리 후 $PO_4-P$ 농도가 0.2 mg P/L 이하에 도달하기 위한 [Ti]/[P]는 감소하였다. T-P 제거효율은 응집제 주입량이 증가할수록 높아졌지만, 최고 제거효율에 도달한 후에는 B값에 관계없이 감소하였다. 반면에 $PO_4-P$ 제거율은 최고점에 도달한 후 B값에 상관없이 일정하게 유지하는 경향이 나타났다. 동일한 인 제거효율에서 Ti계열 응집제의 주입량은 Al계열 응집제보다 약 2배정도 높았다. 또한, Ti계열 응집제의 B값에 따라 인제거효율에 영향을 미쳤다.