• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.593-595
• /
• 1992

To improve the lifetime and output power in a sealed-off $CO_2$ laser, a series of Nd$_{1-x}$Sr$_x$CoO$_3$(x = 0.0, 0.25, 0.40, 0.50, 0.60, 0.75) perovskite-type compounds has been synthesized and used for a cathode material. Using a typical method samples were sintered at 1150$^{\circ}$C and their structures were determined as a cubic form by means of XRD analysis. The degrees of $CO_2$ dissociation were measured by PAS (photoacoustic spectroscopy) with the lapse of time. In the case of $Nd_{0.4}$Sr$_{0.6}$$CoO_3$, which showed the highest catalytic cathode effect, only 7% of the initial $CO_2$ concentration were dissociated at 30 torr of gas mixture and 5 mA of discharge current. The more the gas pressure decreased and the discharge current increased, the more the degree of dissociation occurred. The ability of catalytic cathode to regenerate CO$_2$ in the laser cavity lies in order for x, 0.60 > 0.50 > 0.40 > 0.75 > 0.25 ${\gg}$ 0.0. Except for the case of x = 0.0 the amounts of $CO_2$ dissociation were found to be within 7-15% of the initial $CO_2$ concentration.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.80-87
• /
• 2008

Many researches related to the reliability of Pb-free solder joints with PCB (printed circuit board) surface finish under thermal or vibration stresses are in progress, because the electronics is operating in hash environment. Therefore, it is necessary to assess Pb-free solder joints life with PCB surface finish under thermal and mechanical stresses. We have investigated 4-points bending fatigue lifetime of Pb-free solder joints with OSP (organic solderability preservative) and ENIG (electroless nickel and immersion gold) surface finish. To predict the bending fatigue life of Sn-3.0Ag-0.5Cu solder joints, we use the test coupons mounted 192 BGA (ball grid array) package to be added the thermal stress by conducting thermal shock test, 500, 1,000, 1,500 and 2,000 cycles, respectively. An 4-point bending test is performed in force controlling mode. It is considered that as a failure when the resistance of daisy-chain circuit of test coupons reaches more than $1,000{\Omega}$. Finally, we obtained the solder joints fatigue life with OSP and ENIG surface finish using by Weibull probability distribution.

• 정보보호학회논문지
• /
• 제16권5호
• /
• pp.25-34
• /
• 2006

기존에 제안된 모바일 IPv6를 위한 바인딩 갱신 프로토콜은 이동노드가 홈 링크가 아닌 외부 링크로 이동할 때마다 동일한 프로토콜 과정을 반복한다. 뿐만 아니라 바인딩 갱신의 정해진 수명으로 인해 이동하지 않은 경우에도 동일한 과정을 수시로 반복해야 한다. 본 논문은 이 문제점을 해결하기 위해 티켓 기반의 바인딩 갱신 프로토콜을 제안한다. 제안하는 프로토콜은 대응노드가 발급한 티켓을 사용하여 빈번하게 발생할 수 있는 바인딩 갱신 과정을 최소화 한다. 모바일 IPv6의 보안 요구사항과 기존에 알려진 공격에 대한 프로토콜의 안전성을 분석하였으며, 기존에 제안된 바인딩 갱신 프로토콜과 성능을 비교하여 효율성을 분석하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.480-482
• /
• 2021

핵심역량은 생애에 걸쳐 개발되어야 하는 역량으로 학교교육에도 반영되어야 하는 개념으로 그 중요성이 더욱더 높아지고 있다. 본 연구는 국내 D대학의 졸업생을 대상으로 핵심역량기반 교육과정을 수강한 학생들의 핵심역량과 취업과의 관련성을 분석하여 D대학 교육과정의 개선 및 대학 교육 정책에 반영하는 것을 목적으로 한다. 향후 분석 결과를 활용하여 취업률 상승 및 D대학의 인재상에 맞는 인재를 육성하기 위한 자료로 사용할 예정이다.

• 대한두경부종양학회지
• /
• 제39권2호
• /
• pp.45-48
• /
• 2023

Malignant peripheral nerve sheath tumor (MPNST) is one of the soft tissue sarcoma believed to originate from neural crest cells. The patients with neurofibromatosis type I (NF1) have about 8-13% of the lifetime risk of the malignant transformation. Neurofibroma on patients with NF1 can be surgically resected and has good prognosis if approach to the tumor is possible. We experienced a case of a 50-year-old woman with NF who had incompletely resected neurofibroma, which presented a rapid malignant transformation to MPNST, 3 months after the first surgery. We reported this case with a brief review of literature.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.900-906
• /
• 2024

The Passively-Cooled Molten Salt Fast Reactor (PMFR) is one of the advanced design concepts of the Molten Salt Fast Reactor (MSFR) which utilizes a natural circulation for the primary loop and aims to attain a long-life operation without any means of fuel reprocessing. For an extended operation period, it is necessary to have enough fissile material, i.e., high excess reactivity, at the onset of operation. Since the PMFR is based on a fast neutron spectrum, direct implementation of a burnable absorber concept for the control of excess reactivity would be ineffective. Therefore, a localized moderator concept that encircles the active core has been envisioned for the PMFR which enables the effective utilization of a burnable absorber to achieve low reactivity swing and long-life operation. The modified PMFR design that incorporates a moderator and burnable absorber is presented, where depletion calculation is performed to estimate the reactor lifetime and reactivity swing to assess the feasibility of the proposed design. All the presented neutronic analysis has been conducted based on the Monte Carlo Serpent2 code with ENDF/B-VII.1 library.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.43-49
• /
• 2015

전자 제품의 경박 단소화 및 고집적화가 이루어 지면서 반도체 칩뿐만 아니라 유기 기판도 고집적화가 요구되고 있다. 본 연구는 인쇄회로기판의 미세 피치 회로에 대한 고온고습 전압인가 시험을 실시하여 불량 메커니즘을 연구하였다. $130^{\circ}C/85%RH/3.3V$와 $135^{\circ}C/90%RH/3.3V$ 시험조건에서 고온고습 전압시험(Biased HAST)의 가속 계수는 2.079로 계산되었다. 불량 메커니즘 분석을 위하여 집속이온빔(FIB) 분석이 이용되었다. (+)전극에서는 콜로이드 형태의 $Cu_xO$와 $Cu(OH)_2$가 형성되었으며, (-)전극에서는 수지형태의 Cu가 관찰되었다. 이를 통해 $Cu^{2+}$ 이온과 전자($e^-$)가 결합한 수지상 Cu에 의해 절연파괴가 일어난다는 것을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.581-588
• /
• 2013

This paper presents a study of the process temperature dependence of $Al_2O_3$ film grown by thermal atomic layer deposition (ALD) as a passivation layer in the crystalline Si (c-Si) solar cells. The deposition rate of $Al_2O_3$ film maintained almost the same until $250^{\circ}C$, but decreased from $300^{\circ}C$. $Al_2O_3$ film deposited at $250^{\circ}C$ was found to have the highest negative fixed oxide charge density ($Q_f$) due to its O-rich condition and low hydroxyl group (-OH) density. After post-metallization annealing (PMA), $Al_2O_3$ film deposited at $250^{\circ}C$ had the lowest slow and fast interface trap density. Actually, $Al_2O_3$ film deposited at $250^{\circ}C$ showed the best passivation effects, that is, the highest excess carrier lifetime (${\tau}_{PCD}$) and lowest surface recombination velocity ($S_{eff}$) than other conditions. Therefore, $Al_2O_3$ film deposited at $250^{\circ}C$ exhibited excellent chemical and field-effect passivation properties for p-type c-Si solar cells.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.38-44
• /
• 2009

Recently, the research focused on fuel cell hybrid vehicles (FCHVs) is becoming an attractive solution due to environmental pollution generated by fossil fuel vehicles. The proper energy control strategy will result in extending the fuel cell lifetime, increasing of energy efficiency and an improvement of vehicle performance. Battery state of charge (SoC) is an important quantity and the estimation of the SoC is also the basis of the energy control strategy for hybrid electric vehicles. Estimating the battery's SoC is complicated by the fact that the SoC depends on many factors such as temperature, battery capacitance and internal resistance. In this paper, battery charging time estimated by SoC is studied by using the speed response and current response. Hybrid system is consist of a fuel cell unit and a battery in series connection. For experiment, speed response of vehicle and current response of battery were determined under different state of charge. As the results, the optimal battery charging time can be estimated. Current response time was faster than RPM response time at low speed and vice versa at high speed.

• International Journal of Contents
• /
• 제11권2호
• /
• pp.31-36
• /
• 2015

Recent years have seen a significant increase in demand for multimedia data over wireless sensor networks for monitoring applications that utilize sensor nodes to collect multimedia data, including sound and video. However, the multimedia streams generate a very large amount of data. When data transmission schemes for traditional wireless sensor networks are applied in wireless multimedia sensor networks, the network lifetime significantly decreases due to the excessive energy consumption of specific nodes. In this paper, we propose a data compression scheme that implements the Chinese remainder theorem to a wireless multimedia sensor network. The proposed scheme uses the Chinese Remainder Theorem (CRT) to compress and split multimedia data, and it then transmits the bit-pattern packets of the remainder to the base station. As a result, the amount of multimedia data that is transmitted is reduced. The superiority of our proposed scheme is demonstrated by comparing its performance to that of an existing scheme. The results of our experiment indicate that our proposed scheme significantly increased the compression ratio and reduced the compression operation in comparison to those of existing compression schemes.