• 제목/요약/키워드: OH

검색결과 66,688건 처리시간 0.096초

한국과 중국 소비자의 쇼핑 경험가치 지각과 브랜드자산 및 점포충성도의 관계에 관한 비교 연구: 대형 할인점을 중심으로 (Study on the Relationships Among Perceived Shopping Values, Brand Equity, and Store Loyalty of Korean and Chinese Consumers: A Case of Large Discount Store)

  • 황순호;오종철;윤성준
    • Asia Marketing Journal
    • /
    • 제14권2호
    • /
    • pp.209-237
    • /
    • 2012
  • 오늘날의 소비자들은 가격, 제품의 품질 등 실용적 가치 보다 쇼핑의 즐거움, 라이프스타일의 구현, 매력적인 점포쇼핑환경, 브랜드 애착심 등의 정서적 가치를 더 중요하게 생각하고 있다. 이처럼 소비자들은 단순히 상품만을 구매하기보다는 다양한 가치를 얻기 위해 쇼핑을 한다는 사실은 여러 연구에서 제안되었다(안광호와 이하늘 2011; Mathwick 등 2001). 이렇듯 소매점포 선택과 관련한 소비자행동차원의 쇼핑경험가치와 브랜드자산에 대한 중요성과 관심이 높아지고 있지만 관련 연구는 미미한 실정이며 이와 관련한 비교문화적 연구는 매우 미비한 실정이다(황순호 2010). 본 연구는 한국과 중국의 소비자들의 소매점포 선택과 관련한 소비자행동연구의 필요에 의해 시작되었다. 또한 소비자행동분야에서 소비자 경험이 중시되면서 소매점내 쇼핑경험가치에 초점을 맞추었다. 본 연구는 정치, 경제, 사회, 문화적으로 서로 다른 한국과 중국의 소비자들을 대상으로 대형할인점 소매점포에서 고객들이 지각하는 쇼핑 경험가치와 브랜드자산과의 관계를 밝혀내고 이를 통해 점포 충성도와의 관계를 찾아내어 소매점의 쇼핑 경험가치와 관련된 시사점을 찾아내기 위한 국가 간 비교 연구를 시도하였다. 본 연구는 이론적 배경으로 쇼핑가치와 유통브랜드 자산, 그리고 점포 충성도에 대한 이론적 배경을 소개하였으며, 가설 검증을 위한 자료 수집을 위하여 한국과 중국의 대형할인점 고객들을 대상으로 한국과 중국의 대도시 (서울 과 북경) 소비자들을 표본프레임으로 설정하고, 대면 설문조사를 실시하였다. 연구의 결과 한중간 소비성향 차이 비교에 대한 결과를 요약하면 다음과 같다. 첫째, 한국소비자와 중국 소비자 간의 소비성향차이를 검정한 결과 중국 소비자들은 심미적 소비성향과 상징적 소비성향의 평균값이 한국 소비자들에 비해 높게 나타났으며 한국 소비자들은 쾌락적 소비성향이 중국소비자들에 비해 상대적으로 높은 것으로 나타났다. 둘째, 대형할인점에 대한 한국과 중국의 브랜드 자산 지각에 대한 연구결과 중국에 비해 한국 소비자들이 브랜드 인지와 브랜드 이미지를 모두 높게 지각하는 것으로 나타났다. 셋째, 한국과 중국에서 편의점과 할인점 이용 고객들이 지각하는 소매점에서의 쇼핑경험에 대한 탐색적 요인분석결과 각각의 국가에 따라 각기 다른 쇼핑경험가치가 나타났다. 한국의 할인점에서는 소비자이익 가치, 심미성가치, 유희성 가치가 중요한 쇼핑가치로 도출되었다. 또한 중국의 할인점에서는 유희성 가치, 심미성 가치, 소비자이익 가치, 서비스우수 가치가 중요한 쇼핑경험가치로 도출되었다. 이러한 연구의 목적에 대한 실증적 분석을 바탕으로 한국과 중국의 대형할인점 소비자들의 쇼핑경험가치과 브랜드자산을 바탕으로 한국의 대형할인점에 있어서 경험가치의 이론적 중요성에 관한 새로운 통찰력을 제공하여 주며 충성도 제고에 있어서 브랜드관리의 중요성에 대한 이론적 시사점을 제공하여 준다. 이와 더불어 유통의 국제화 시대에 있어서 대형할인점의 국제화에 요구되는 한국과 중국 간의 고객 가치의 차이점에 대한 비교문화적 관점에서 중요한 실무적 시사점을 제시한다. 즉, 해외유통전략을 실행하는데 있어서 쇼핑가치에 기반한 현지화 전략의 중요성에 대한 시사점을 제시하여 주며 국가차원에서의 차별적 유통전략의 개발 필요성을 제안하여 준다.

  • PDF

재상업복무교역중적매매관계중상호신임대관계적효적영향(在商业服务交易中的买卖关系中相互信任对关系绩效的影响) (The Effect of Mutual Trust on Relational Performance in Supplier-Buyer Relationships for Business Services Transactions)

  • Noh, Jeon-Pyo
    • 마케팅과학연구
    • /
    • 제19권4호
    • /
    • pp.32-43
    • /
    • 2009
  • 信任在心理学, 经济学, 社会学中已被广泛研究, 其重要性不仅在市场营销中被强调, 在一般商业原则中也被强调. 供应商和买家之间的关系与过去不同, 过去的关系需要相当大的私人网络优势, 并可能涉及不道德的商业行为. 而在以工业营销成功的为核心的二十一世纪激烈的全球竞争中, 供应商和买家之间的关系是伙伴关系. 在相互合作的高级别信任的基础上, 通过交换的关系, 这会给买家和供应商带来长期的利益, 竞争力增强和交易成本的降低以及其他福利. 尽管现有的研究有信任的重要性, 但是在购买与供应关系中却忽视了信任的作用, 也没有系统地分析信任对关系的影响. 因此, 深入研究, 确定买家和商业服务供应商之间信任和关系绩效之间的联系是绝对需要的. 本研究中的商业服务, 包括那些支持制造业, 正作为下一代经济增长的引擎而吸引着人们的注意. 韩国政府已选择其作为制造业发展的战略领域. 由于商业服务开放市场的需求日趋激烈, 商业服务业的竞争力应该比以往得到更多的提倡. 本研究的目的是探索相互信任对买家和供应商之间的关系绩效的影响. 具体来说, 本研究在商业服务交易中提出了一个关于信任-关系绩效的理论模型, 并实证检验根据模型而提出的假设. 这项研究表明, 研究结果有战略意义. 本研究通过多种方法收集经验数据. 这些方法包括通过电话, 邮件和面试. 作为样本的公司是在韩国供应和购买商业服务的以知识为本的公司. 本研究收集的是二进的基础数据. 每个样本公司对包括购买公司及其相应的供应公司. 并跟踪调查每个公司对的相互信任. 本研究为商业服务的买卖双方提出了信任-关系绩效的模型. 该模型由信任和它的前因和后果. 买家的信任分为对供应公司的信任和对销售人员的信任. 根据Doney 和Cannon (1997)的研究我们在个人水平和组织水平上观察信任. 通常情况下, 买方是信任的受体, 但这项研究我们建议以供应商为观察受体. 因此, 它独特的关注了双边角度的知觉风险. 换言之, 供应商和买家一样, 是信任的主体, 因为交易通常是双边的. 从这个角度来看, 供应商对买家信任和买方对供货商的信赖一样重要. 供应商的信任从某种程度上受它信任的买方公司和买家的影响. 这种使用个人水平和组织水平的信任分类是根据Doney 和Cannon (1997)的研究. 信任影响供应商的选择, 这是一项双向放的工作. 供应商们积极参与供应商选择过程中, 和买家密切的一起工作. 此外, 该过程从某种程度上受每一方信任的合作伙伴的影响. 挑选过程包括一些步骤: 识别, 信息检索, 供应商选择和绩效评价. 作为这一进程的结果, 买家和供应商都进行绩效评估, 并就这些结果为基础, 采取有形或无形的纠正行动. 本研究中使用的关于信任的测量问项是根据Mayer, Davis 和 Schoorman (1995) 以及Mayer和Davis (1999)的研究发展起来的. 根据他们的建议, 有关信任的三个方面的研究包括有能力, 善和完整. 根据商业服务这个背景我们调整了原来的问题. 例如, 如 "他/她的专业能力" 已被改为 "当我们讨论我们的产品时销售人员表现出专业能力. "这项研究使用的测量问项不同于在以往的研究中使用的问项(Rotter 1967; Sullivan和Peterson 1982; Dwyer和Oh 1987. 本研究中有关信任的前因后果的测量问项是根据Doney和Cannon (1997)的研究为基础制定的. 根据商业服务这个背景我们调整了原来的问题. 特别是, 问题被设计为对买家和供应商以解决下列因素: 信誉 (诚信, 客户服务, 良好意愿), 市场地位 (公司规模, 市场份额, 在行业中的地位), 愿意定制(产品, 过程, 交付), 信息共享(专有信息, 个人信息), 愿意保持良好关系, 认为专业, 权威授权, 买方与卖方的相似性, 以及接触频率. 作为信任相应的变量, 我们对关系绩效进行了测试. 关系绩效分为有形的影响, 无形影响, 和副作用. 有形的影响包括财务业绩;无形的影响, 包括关系的改善, 网络开发, 以及内部员工的满意度;副作用包括既不是有形影响也不是无形影响的影响. 我们联系了350对公司, 105对公司答复了我们. 由于不完整我们删除了5对公司, 105对公司被用于数据分析. 用于数据分析的回应率为30%(三百五十零分之一百零五), 高于工业营销的平均回复比率. 至于回复的公司的特点, 大多数的公司运作的商业服务既为买方(85.4%)也为供应商(81.8%). 大部分买家是做消费品贸易(76%), 而供应商的大部分(70%)是做工业品贸易. 这可能意味着买家的过程是购入材料, 部件和组件从而生产消费品成品. 正如他们对他们与合作伙伴关系的长度的报告表示, 供应商比买家有更长的商业关系. 假设1测试买方-供应方特点对信任的影响. 销售人员的专业度(t=2.070, p<0.05)和权威授权(t=2.328, p<0.05)积极影响买方对供应方的信任. 另一方面, 权威授权(t=2.192, p<0.05)积极影响供应方对买方的信任. 对买方和供应方来说, 权威授权的程度对保持对彼此的信任有关键作用. 假设2测试买卖双方关系特点对信任的影响. 买家倾向于信任供应方, 因为供应方总是尽全力联系买方(t=2.212, p<0.05)这种倾向性在供应方方面也表现得很强(t=2.591, p<0.01). 另一方面, 供应商对买方的信任是由于供应商感知买家与自己的相似性(t=2.702, p<0.01). 这一发现证实了Crosby, Evans, 和Cowles(1990)的研究结果. 他们的结果表明供应方和买方通过商务或私务的定期会议来建立彼此的联系. 假设3测试信任对感知风险的影响. 结果表明无论对买方还是供应方, 信任越低, 感知风险就越大(买方: t =-6.621, p<0.01; 供应方: t=-2.437, p<0.05). 有趣的是, 这一趋势已被证明对买方更强. 这种较高水平的感知风险的一个可能的解释是在商业服务交易中买方通常比供应方感知到更大的风险. 为此, 有必要对供应商对买方实施减少风险的战略. 假设4测试信任对信息搜集. 根据结果, 对供应方和买方, 与预期相反, 信任取决于他们合作伙伴的名誉(买方t=2.929, p<0.01; 供应方t=2.711, p<0.05). 这一发现表明, 具有良好信誉的供应商往往是可信的. 以往的经验并没有显示出任何与买家或供应商信任的重要关系. 假设5测试信任对供应方/买方选择的影响. 与买方不同, 当供应方认为以往与买方的交易重要时, 供应方倾向信任买方(t=2.913 p<0.01). 但是, 本研究并没有现实资源忠诚和买方对供应方的信任之间有显著关系. 假设6测试的是信任对关系绩效的影响. 对买方和供应方, 当财务表现被报告提高时, 他们比较信任他们的合作伙伴(买方: t=2.301, p<0.05;供应方: t=3.692, p<0.01). 有趣的是, 这种趋势在供应方比较明显. 类似的, 当竞争力被报告提高时, 买卖双方比较信任他们的合作伙伴(买方t=3.563, p<0.01 ; 供应方t=3.042, p<0.01). 对供应方来说, 当对买方信任时效率和生产力会提高(t=2.673, p<0.01). 其他绩效指标与信任没有显著关系. 这项研究结果有一定的战略意义. 首先和最重要的是, 以信任为基础的交易对供应商和买家而言都是有益的. 根据研究证实, 通过努力建立和保持相互信任可以使财务表现提高. 同样, 可以通过同样的努力提高竞争力. 第二, 以信任为基础的交易能够减少购买情况中的感知风险. 这对供应商和买家都有启示. 人们普遍认为, 在一个高度参与的采购情况中买家感知到更高的风险. 为了减少风险, 以往的研究已建议供应商制定降低风险的策略. 而本研究的特点是从双边角度关注知觉风险. 换言之, 供应商也容易存在风险, 特别是当他们提供的服务, 需要非常先进的技术, 操作和维护. 因此, 购买者和供应商必须一起密切合作解决问题. 因此, 相互信任在问题解决过程中起着关键作用. 第三, 在这项研究中发现, 销售人员有更多的授权, 他或她越被信任. 这一发现从战术角度看是非常重要的. 建立信任是一个长期的任务, 然而, 当互信尚未开发, 供应商能够通过授权销售人员做出某些决定来克服遇到的问题, 这一结论也适用于供应商.

  • PDF

감자를 이용(利用)한 탁주제조(濁酒製造)에 관(關)한 연구(硏究) (Studies on Takju Brewing with Potatoes)

  • 김성열;오만진;김찬조
    • Applied Biological Chemistry
    • /
    • 제17권2호
    • /
    • pp.81-92
    • /
    • 1974
  • 감자를 탁주(濁灌) 원료(原料)로 사용(使用)하기 위(爲)하여 증자(蒸煮), 건조(乾燥) 분쇄(粉碎)하고 이들의 화학성분(化學成分)을 분석(分析)하였으며 서분(薯粉)을 이용(利用)한 입국제조조건(粒麴製造條件), 담금조건(條件) 및 원료(原料)를 달리하였을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)함과아울러 술덧 숙성중(熱成中) 및 제성주(製成酒)의 보존중(保存中)에 있어서의 화학성분(化學成分) 및 microflora의 변화(變化) 기타(其他) 시험양조주(試驗釀造酒)의 관능검사(官能檢査) 등(等)을 행(行)하여 다음과 같은 결과를 얻었다 1. 증서(蒸著)와 서분(薯粉)의 화학성분(化學成分)은 각각(各各) 수분(水分) 76.2, 10.8%, 총당(總糖) 16.1, 69.8%, 환원당(還元糖) 3.45, 13.4% 조단백질(粗蛋白質) 2.1, 11.3% 총산(總酸) 0.012, 0.023%, 휘발산(揮發酸) 0.0012, 0.0025%이었다. 2. 서분(薯粉)을 이용(利用)한 이북제조(粒麴製造) 조건(條件)이 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)한 결과(結果) 원료분(原料紛)에 대하여 $40{\sim}50%$의 물을 혼화(混和)하여 상법(常法)에 의(依)해서 48시간(時間) 배양(培養)하는것이 효과적(效果的)이었으며 이와같은 조건하(條件下)에서 제조(製造)한 입국(粒麴)의 액화형(液化型) 및 당화형(糖化型) amylase의 역가(力價)는 각각(各各) D $40^{\circ}$30‘, 128 W.V., 13.2A.U.이었다. 3. Table I에서 표시(表示)한 기본(基本) 담금비율중(比率中) 여러가지 조건(條件)을 변화(變化)시켰을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. (1) 1단(段) 담금 할 때에는 원료입국(原料粒麴) 60g에 대(對)하여 140ml의 물을, 2단(段) 담금 할 때에는 원료(原料) 140g에 대(對)하여 260ml의 물을 첨가(添加)하는 것이 가장 효과적(效果的)이었다. (2) 1단(段)을 $25^{\circ}C$, 2단(段)을 $30^{\circ}C$에서 발효(醱酵)시킬 때 1, 2단(段) 모두 48시간(時間)씩 발효(醱酵)시키는 것이 가장 효과적(效果的)이었다. (3) 분국(粉麴)은 1단(段)에 0.5%, 2단(段)에 1.0%를 첨가(添加)하는 것이 가장 효과적(效果的)이었고 입국(粒麴)은 20${\sim}$30% 사용시(使用時)에 술덧 성분상(成分上)에 큰 차이(差異)를 나타내지 않았다. (4) 증서분(蒸薯努)과 생서분(生薯粉)을 사용(使用)하여 탁주(濁酒)를 제조(製造)하였을때 술덧중(中)의 methanol 함량(含量)은 각각(各各) 0.03%, 및 0.06%이었다. (5) 서분(薯粉)을 원료(原料)로 양조(釀造)하였을 때는 소맥분(小麥粉)을 원료(原料)로 사용(使用)하였을 때에 비(比)하여 주도(酒度), fusel oil 및 Formol-N의 함량(含量)이 낮고 methanol의 함량(含量) 및 산도(酸度)는 높았다. 4. 서분(薯粉)을 원료(原料)로하여 1단(段)에서 24시간(時間), 2단(段)에서 96시간(時間)까지 발효(醱酵)시키면서 발효기간중(醱酵期間中)의 화학성분(化學成分) 및 microfora의 변화(變化)를 측정(測定)한 결과 (1) Alcohol 함량(含量)은 72시간(時間)까지 계속(繼續) 증가(增加)하여 11.9%에 달(達)하였으며 그 후(後)에는 약간(若干) 감소(減少)하였다. (2) 총당량(總糖量)은 $48{\sim}72$시간(時間)까지 급격(急激)히 감소(減少)하여 72시간(時間)에 2.62%에 달(達)하였으며 그 후(後)에는 서서(徐徐)히 감소(減少)되었다. (3) 환원당량(還元糖量)도 점차(漸次) 감소(減少)하였으며 48시간(時間)에 0.29%에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감(增減)을 나타내었다. (4) 총산도(總酸度), 휘발산도(揮發酸度) 및 Formol-N의 함량(含量)은 점차(漸次) 증가(增加)하여 48시간(時間) 후(後)에는각각(各各) 7.30, 0.20, 2.55에 달(達)하고 그 후(後)에도 약간(若干)씩 증가(增加)하는 경향(傾向)을 나타내었다. (5) 총효모수(總酵母數)는 72시간(時間)에 최고(最高)($2.1{\times}10^8$)에 달(達)하였으며 그 후(後)에는 점차(漸次) 감소(滅少)하였다. (6) 총세균수(總細菌數)는 48시간(時間)에 최고(最高)($2.4{\times}10^8$)에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감현상(增減現象)을 나타내였다. 5. 서분(薯粉)으로 양조(釀造)한 탁주(濁酒)를 alcohol 함량(含量) 6%가 되도록 제성(製咸)하여 $30^{\circ}C$에 72시간(時間) 보존(保存)하면서 주도(酒度), 산도(酸度), 총효모수(總酵母數) 및 총세균수(總細菌數)의 변화(變化)를 측정(測定)한 결과(結果) (1) alcohol 함량(含量)은 24시간(時間)에 약간(若干) 증가(增加)(6.2%) 하였다가 그 후(後)에는 점차(漸次) 감소(減少)하였다. (2) 총산도(總酸度)는 제성직후(製成直後) 3.8이었든것이 72시간(時間)에 6.1에 달(達)하도록 증가(增加)하였다. (3) 총효모수(總酵母數) 및 총세균수(總細菌數)는 48시간(時間)에 최고(最高)에 달(達)하여 각각(各各) $1.5{\times}10^8$$2.3{\times}10^8$이 되었으며 그 후(後)에는 점차감소(漸次減少)하였다. 6. 서분국(薯粉麴) 및 소맥분국(小麥粉麴)을 사용(使用)하여 1단(段) 담금하고 2단(段)에 이들의 5배량(倍量)의 증서(蒸薯)를 담금하여 발효(醱酵)시킨 결과(結果) alcohol함량(含量) 9.8${\sim}$11.3%, 총산도(總酸度) 5.8${\sim}$7.4 Formol-N 2.5${\sim}$3.3의 색택양호(色澤良好)한 술덧을 얻었다. 7. 서분(薯粉), 소맥분(小麥粉) 및 증서(蒸薯)를 여러가지 비율(比率)이 되도록 시험양조(試驗讓造)하여 alcohol함량(含量) 6%가 되도록 제성(製成)한 후(後) 관능시험(官能試驗)을 행(行)한 결과(結果) 소맥분(小麥粉)과 증서(蒸蓄)의 비율(比率)을 4 : 5 또는 3.5 : 7.5가 되도록하여 양조(釀造)한 탁주(濁酒)는 소맥분(小麥粉) 전용탁주(專用濁酒)와 관능면(官能面)에서 유의차(有意差)가 인정(認定)되지 않았으여 소맥분(小麥粉)과 서분(薯紛)의 비율(比率)을 1 : 1 또는 3 : 7의 비율(比率)이 되도록하여 양조(釀造)한 탁주(濁酒)는 상기(上記) 3종류(種類)의 탁주(濁酒)와 고도(高度)의 유의성(有意性)이 인정(認定)되었다.

  • PDF

학영기전아동(學齡期前兒童)의 영양실태조사(營養實態調査) (A Survey of Nutritional Status on Pre-School Children in Korea)

  • 주진순;오승호
    • Journal of Nutrition and Health
    • /
    • 제9권2호
    • /
    • pp.68-86
    • /
    • 1976
  • 1. 식품(食品) 섭취(攝取) 상태(狀態) 각(各) 지역별(地域別) 남녀(男女) 아동(兒童)의 전(全) 연령(年齡)을 통(通)한 1차(次) 및 2차(次) 조사(調査)의 1일(日) 1인당(人當) 평균(平均) 식품(食品) 섭취(攝取) 상태(狀態)는 다음과 같다. 1) 양구지역(楊口地域)의 아동(兒童)의 총(總) 식품(食品) 섭취량(攝取量)은 $508.1g{\sim}647.1g$ 범위(範圍)로서 이중(中) 식물성식품(植物性食品) 및 동물성식품(動物性食品)의 섭취비율(攝取比率)은 각각(各各) $83.0{\sim}91.3%$% 및 $5.5{\sim}11.7%$범위(範圍) 이었다. 2) 여주지역(麗州地域) 아동(兒童)의 총식품(總食品) 섭취량(攝取量)은 $586.6g{\sim}697.9g$ 범위(範圍)로서 이중(中) 식물성식품(植物性食品) 및 동물성식품(動物性食品)의 섭취비율(攝取比率)은 각각(各各) $88.2{\sim}89.0%$$6.3{\sim}7.6%$ 범위(範圍) 이었다. 2. 영양소(營養素) 섭취(攝取) 상태(狀態) 각(各) 지역별(地域別) 남녀(男女) 아동(兒童)의 전(全) 연령(年齡)을 통(通)한 1차(次) 및 2차(次) 조사(調査)의 1일(日) 1인당(人當) 평균(平均) 각(各) 영양소(營養素)의 섭취(攝取) 상태(狀態)는 다음과 같다. 1) 열량(熱量) 섭취량(攝取量)은 권장량 1500 kcal에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $1120{\sim}1415kcal$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $1407{\sim}1556kcal$ 범위(範國)이었다. 2) 단백질(蛋白質) 섭취량(攝取量)은 권장량 45g 에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $33.1{\sim}42.6g$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $35.5{\sim}42.6g$ 범위(範圍)이었다. 그러나 이들 단백질(蛋白質) 섭취량중(攝取量中) $5.5{\sim}11.7%$만이 동물성(動物性) 단백질(蛋白質) 이였다. 3) 지방(脂肪) 섭취량(攝取量)은 권장량 20g 에 비(比)하며 양구지역(楊口地域) 아동(兒童)이 $13.9{\sim}24.3g$ 범위(範圍)이었고 여주지역(麗州池域) 아동(兒童)이 $10.4{\sim}12.1g$ 범위(範圍)이었다. 4) 당질(糖質) 섭취량(攝取量)은 양구(楊口) 및 여주지역아동(麗州地域兒童) 각각(各各) 총열량(總熱量) 섭취량(攝取量) 의 $70.6{\sim}83.8%$ 범위(範圍)를 차지 하였다. 5) 칼슘 섭취량(攝取量)은 권장량 500 mg 에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $282.4{\sim}355.0mg$이었고 여주지역(麗州地域) 아동(兒童)이 $284.6{\sim}429.0mg$ 이었다. 6) 철(鐵) 섭취량(攝取量)은 권장량 10mg에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $6.0{\sim}12.1mg$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $6.4{\sim}16.7mg$ 범위(範圍)로 상당수의 아동(兒童)이 권장량에 미달(未達) 되었다. 7) 비터민 A 섭취량(攝取量)은 양구지역(楊口地域)이 $703.4{\sim}1495.6\;IU$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $750.5{\sim}1521.2\;IU$ 범위(範圍)로서 ${\beta}-carotene$으로서의 권장량 5100 I.U,에 비(比)하여 매우 부족되었다. 8) 비타민 $B_1$ 섭취량(攝取量)은 권장량 0.8mg에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $0.6{\sim}0.8mg$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $1.0{\sim}1.3mg$ 범위(範圍)이었다. 9) 비타민 $B_2$ 섭취량(攝取量) 0.9mg에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $0.4{\sim}0.7mg$ 범위(範圍) 이었고 여주지역(麗州地域) 아동(兒童)이 $0.8{\sim}1.0mg$ 범위(範圍)이었다. 10) 비타민 C 섭취량(攝取量)은 권장량 40mg에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $17.6{\sim}37.0mg$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $43.3{\sim}58.0mg$ 범위(範圍)이었다. 11) 나이아신 섭취량(攝取量)은 권장량 10mg에 비(比)하여 양구지역(楊口地域) 아동(兒童)이 $9.3{\sim}15.2mg$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $10.8{\sim}16.9mg$ 범위(範圍)이었다. 3. 체위(體位) 1) 신장(身長) : 양구지역(楊口地域) 남자아동(男子兒童)은 4세(歲) 및 5세(歲)에서 표준치(標準値)보다 다소(多少) 작았고 6세(歲)는 컸는데 여자아동(女子兒童)은 각(各) 연령별(年齡別) 모두 표준치(標準値) 보다컸다. 이에 비(比)하여 여주지역(麗州地域) 남자아동(男子兒童)은 각(各) 연령별(年齡別) 표준치(標準値)에 비(比)하여 컸으나 여자아동(女子兒童)은 5세(歲)에 다소(多少) 작았다. 2) 체중(體重) : 양구지역(楊口地域) 남자아동(男子兒童)은 4세(歲) 및 5세(歲)에서 표준치(標準値)보다 다소(多少) 미달(未達) 되었으나 6세(歲)는 높았는데 여자아동(女子兒童)은 각(各) 연령별(年齡別) 모두 표준치(標準値)와 비슷하였다. 이에 비(比)하며 여주지역(麗州地域) 남자(男子) 아동(兒童)은 각(各) 연령별(年齡別) 표준치(標準値)와 비슷 하거나 다소(多少) 높았으나 여자(女子) 아동(兒童)은 다소(多少) 낮았다. 3) 상완위(上腕圍) : 남녀(男女) 아동(兒童)의 전(全) 연령(年齡)을 통(通)하여 1차(次) 및 2차조사(次調査) 성적(成績)은 양구지역(楊口地域) 아동(兒童)이 $15.1cm{\sim}16.8cm$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)이 $15.6cm{\sim}16.6cm$ 범위(範圍) 이었다. 4) 흉위(胸圍) : 양구지역(楊口地域) 남녀(男子) 아동(兒童)은 각(各) 연령별(年齡別) 표준치(標準催)와 큰 차이(差異) 없었는데 여자(女子) 아동(兒童)은 다소(多少) 낮았다. 5) 좌고(座高) : 남자(男子) 아동(兒童)의 전(全) 연령(年齡)을 통(通)하여 양구지역(楊口地域) 아동(兒童)은 $54.2cm{\sim}61.8cm$ 범위(範圍)이었고 여주지역(麗州地域) 아동(兒童)은 $54.8cm{\sim}61.1cm$ 범위(範圍)이었다. 4. 임상증상(臨床症狀) 1) 양구지역(楊口地域) : 남자(男子) 아동(兒童)은 구각염이 약(約) 30% 충치가 약(約) 20%이었으며 여자(女子) 아동(兒童)은 전(全) 대상자(對象者) 31명중(名中) 1명(名)이 갑상선 비대 이었고 구각염이 약(約) 10%, 충치가 약(約) 20%이었다. 2) 여주지역(麗州地域) : 남자(男子) 아동(兒童)도 구각염이 약(約) 20%, 충치가 약(約) 22%이었으며 여자(女子) 아동(兒童)은 구각염이 약(約) 47%, 충치가 약(約) 20%이었다. 5. 생화학적(生化學的) 검사(檢査) 상태(狀態) 1) Hemoglabin 함량(含量)은 양구(楊口) 및 여주지역(麗州地域)의 전(全) 연령별(年齡別)을 통(通)하여 남자(男子) 아동(兒童)은 $11.0g{\sim}11.6g%$ 범위(範圍)이었고 여자(女子) 아동(兒童)은 $10.3g{\sim}11.5g%$ 범위(範圍)이었다. 2) 빈혈해당치(貧血該當値)를 WHO 가 정(定)한 l1g/100ml 이하(以下)로 보았을때 양구지역(楊口地域)의 남자아동(男子兒童)은 $16.7%{\sim}26.7%$, 여자아동(女子兒童) $33.3{\sim}50.0%$ 및 여주지역(麗州地域)의 남자(男子) 아동(兒童)은 33.3%, 여자(女子) 아동(兒童)은 $73.3%{\sim}100.0%$가 빈혈해당자(貧血該當者)에 속했다. 그러나 빈혈(貧血)의 정도(程度)는 심(深)한 경우는 거의 없고 거의 대부분(大部分)이 경(輕)한 빈혈(貧血)임이 특이(特異)하였다. 3) Hematocrit 치(値)는 전(全) 대상자(對象者)를 통(通)하며 $39.9%{\sim}41.6%$ 범위(範圍)이었다. 4) 혈장단백질(血奬蛋白質) 함량(含量)은 전(全) 대상자(對象者)를 통(通)하여 평균(平均) $6.6{\sim}7.4%$ 범위(範圍)이었는데 ICNND의 결핍해당치(缺乏該當値) 6.0g% 이하(以下)에는 양구지역(楊口地域) 4세(歲) 여자아동(女子兒童) 1명(名) 뿐이었다. 6. 기생충 상태(狀態) 1) 양구지역(楊口地域) : 남자아동(男子兒童)은 회충이 약(約) 62%, 편충이 약(約) 62%이었고 여자(女子) 아동(兒童)은 회충이 약(約) 73%, 편충이 약(約) 60%가 충란이 검출(檢出)되었다.

  • PDF

감자를 이용(利用)한 탁주제조(濁酒製造)에 관(關)한 연구(硏究) (Studies on Takju Brewing with Potatoes)

  • 김성열;오만진;김찬조
    • 농업과학연구
    • /
    • 제1권1호
    • /
    • pp.67-81
    • /
    • 1974
  • 감자를 탁주(濁酒) 원료(原料)로 사용(使用)하기 위(爲)하여 증자건조분쇄(蒸煮乾燥粉碎)하고 이들의 화학성분(化學成分)을 분석(分析)하였으며 서분(薯粉)을 이용(利用)한 입국제조조건(粒麴製造條件), 담금조건(條件) 및 원료(原料)를 달리하였을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)함과 아울러 술덧 숙성중(熟成中) 제성주(製成酒)의 보존중(保存中)에 있어서의 화학성분(化學成分) 및 microfiora의 변화(變化) 기타(其他) 시험양조주(試驗釀造酒)의 관능검사등(官能檢査等)을 행(行)하여 다음과 같은 결과를 얻었다. 증서(蒸薯)와 서분(薯粉)의 화학성분(化學成分)은 각각(各各) 수분(水分) 76.2, 10.8%, 총당(總糖) 16.1, 69.8%, 환원당(還元糖) 3.45, 13.4%, 조단백질(粗蛋白質) 2.1, 11.3%, 총산(總酸) 0.012, 0.023%, 휘발산(揮發酸) 0.0012, 0.0025%이었다. 2. 서분(薯粉)을 이용(利用)한 입국제조(粒麴製造) 조건(條件)이 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)한 결과(結果) 원료분(原料粉)에 대하여 40~50%의 물을 혼화(混和)하여 상법(常法)에 의(依)해서 48시간(時間) 배양(培養)하는 것이 효과적(效果的)이었으며 이와같은 조건하(條件下)하에서 제조(製造)한 입국(粒麴)의 액화형(液化型) 및 당화형(糖化型) amylase의 역가(力價)는 각각(各各) $D40^{\circ}$30', 128 W.V., 13.2A.U.이었다. 3. Table 1에서 표시(表示)한 기본(基本) 담금비율중(比率中) 여러 가지 조건(條件)을 변화(變化)시켰을 때에 술덧 성분(成分)에 미치는 영향(影響)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. (1) 1단(段) 담금 할 때에는 원료입국(原料粒麴) 60g에 대(對)하여 140ml의 물을, 2단(段) 담금 할 때에는 원료(原料) 140g에 대(對)하여 260ml의 물을 첨가(添加)하는 것이 가장 효과적(效果的)이었다. (2) 1단(段)을 $25^{\circ}C$, 2단(段)을 $30^{\circ}C$에서 산효(酸酵)시킬 때 1, 2단(段) 모두 48시간(時間)씩 발효(醱酵)시키는 것이 가장 효과적(效果的)이었다. (3) 분국(粉麴)은 1단(段)에 0.5%, 2단(段)에 1.0%를 첨가(添加)하는 것이 가장 효과적(效果的)이었고 입국(粒麴)은 20~30% 사용시(使用時)에 술덧 성분상(成分上)에 큰 차이(差異)를 나타내지 않았다. (4) 증서분(蒸薯粉)과 생서분(生薯粉)을 사용(使用)하여 탁주(濁酒)를 제조(製造)하였을 때 술덧중(中)의 methanol 함량(含量)은 각각(各各) 0.03% 및 0.06%이었다. (5) 서분(薯粉)을 원료(原料)로 양조(釀造)하였을 때는 소맥분(小麥粉)을 원료(原料)로 사용(使用)하였을 때에 비(比)하여 주도(酒度), fusel oil 및 Formol-N의 함량(含量)이 낮고 methanol의 함량(含量) 및 산도(酸度)는 높았다. 4. 서분(薯粉)을 원료(原料)로하여 1단(段)에서 24시간(時間), 2단(段)에서 96시간(時間)까지 발효(醱酵)시키면서 발효기간중(醱酵期間中)의 화학성분(化學成分) 및 microfora의 변화(變化)를 측정(測定)한 결과 (1) Alcohol 함량(含量)은 72시간(時間)까지 계속증가(繼續增加)하여 11.9%에 달(達)하였으며 그 후(後)에는 약간(若干) 감소(減少)하였다. (2) 총당량(總糖量)은 48~72시간(時間)까지 급격(急激)히 감소(減少)하여 72시간(時間)에 2.62%에 달(達)하였으며 그 후(後)에는 서서(徐徐)히 감소(減少)되었다. (3) 환원당량(還元糖量)도 점차(漸次) 감소(減少)하였으며 48시간(時間)에 0.29%에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감(增減)을 나타내었다. (4) 총산도(總酸度), 휘발산도(揮發酸度) 및 Formol-N의 함량(含量)은 점차(漸次) 증가(增加)하여 48시간(時間) 후(後)에는 각각(各各) 7.30, 0.20, 2.55에 달(達)하고 그 후(後)에도 약간(若干)씩 증가(增加)하는 傾向)을 나타내었다. (5) 총효모수(總酵母數)는 72시간(時間)에 최고(最高)($2.1{\times}10^8$)에 달(達)하였으며 그 후(後)에는 점차(漸次) 감소(減少)하였다. (6) 총세균수(總細菌數)는 48시간(時間)에 최고(最高)($2.4{\times}10^8$)에 달(達)하였으며 그 후(後)에는 약간(若干)의 증감현상(增減現象)을 나타내었다. 5. 서분(薯粉)으로 양조(釀造)한 탁주(濁酒)를 alcohol 함량(含量) 6%가 되도록 제성(製成)하여 $30^{\circ}C$에 72시간(時間) 보존(保存)하면서 주도(酒度), 산도(酸度), 총효모수(總酵母數) 및 총세균수(總細菌數)의 변화(變化)를 측정(測定)한 결과(結果) (1) alcohol 함량(含量)은 24시간(時間)에 약간(若干) 증가(增加)(6.2%)하였다가 그 후(後)에는 점차(漸次) 감소(減少)하였다. (2) 총산도(總酸度)는 제성직후(製成直後) 3.8이었든 것이 72시간에 6.1에 달(達)하도록 증가(增加)하였다. (3) 총효모수(總酵母數) 및 총세균수(總細菌數)는 48시간(時間)에 최고(最高)에 달(達)하여 각각(各各) $1.5{\times}10^8$$2.3{\times}10^8$이 되었으며 그 후(後)에는 점차감소(漸次減少)하였다. 6. 서분국(薯粉麴) 및 소맥분국(小麥粉麴)을 사용(使用)하여 1단(段) 담금하고 2단(段)에 이들의 5배량(倍量)의 증서(蒸薯)를 담금하여 발효(醱酵)시킨 결과(結果) alcohol함량(含量) 9.8~11.3%, 총산도(總酸度) 5.8~7.4, Formol-N 2.5~3.3의 색택양호(色澤良好)한 술덧을 얻었다. 7. 서분(薯粉), 소맥분(小麥粉) 및 증서(蒸薯)를 여러가지 비율(比率)이 되도록 시험양조(試驗釀造)하여 alcohol 함량(含量) 6%가 되도록 제성(製成)한 후(後) 관능시험(官能試驗)을 행(行)한 결과(結果) 소맥분(小麥粉)과 증서(蒸薯)의 비율(比率)을 4:5 또는 3.5:7.5가 되도록하여 양조(釀造)한 탁주(濁酒)는 소맥분(小麥粉) 전용탁주(專用濁酒)와 관능면(官能面)에서 유의차(有意差)가 인정(認定)되지 않았으며, 소맥분(小麥粉)과 서분(薯粉)의 비율(比率)을 1:1 또는 3:7의 비율(比率)이 되도록하여 양조(釀造)한 탁주(濁酒)는 상기(上記) 3종류(種類)의 탁주(濁酒)와 고도(高度)의 유의성(有意性)이 인정(認定)되었다.

  • PDF

1788년 김응환의 봉명사경과 《해악전도첩(海嶽全圖帖)》 (Kim Eung-hwan's Official Excursion for Drawing Scenic Spots in 1788 and his Album of Complete Views of Seas and Mountains)

  • 오다연
    • 미술자료
    • /
    • 제96권
    • /
    • pp.54-88
    • /
    • 2019
  • 《해악전도첩(海嶽全圖帖)》은 금강산과 해금강, 관동팔경을 그린 60점의 실경산수화와 51편의 기문(記文)으로 이루어진 화첩으로 규모와 화풍에 있어 보기 드문 작품이다. 그림의 특징은 화면을 가득 채운 구성과 남종화풍을 따르면서도 거칠고 파격적인 화법, 산석(山石)의 기하학적이고 입체적인 표현 등이다. 1973년의 특별전, '한국미술이천년(韓國美術二千年)'을 처음으로 화첩의 일부만 공개되었던 작품은 2019년 국립중앙박물관 특별전 '우리 강산을 그리다: 화가의 시선, 조선시대 실경산수화'에서 그 전모가 공개되었다. 《해악전도첩》이 김응환(金應煥)(1742~1789)의 작품으로 알려진 것은 화첩의 마지막 장에 쓰여진 관지(款識)와 현재 행방이 묘연한 <칠보대>에 찍힌 '복헌'이라는 도장 때문이었다. 그러나 김응환을 지시하는 관지와 도장은 모두 후대에 더해졌을 가능성이 크다. 본 연구는 화첩을 둘러싼 여러 요소를 고찰하여 제작자를 재검토하는 것을 목적으로 한다. 《해악전도첩》 제작 배경을 이해하기 위해 먼저 18세기 금강산 기행사경도의 전통과 봉명사경을 살펴보았다. 정선(鄭敾)(1676~1759)의 《신묘년풍악도첩(辛卯年楓嶽圖)帖》(1711)을 비롯하여 심사정(沈師正)(1707~1769), 김윤겸(金允謙)(1711~1775), 최북(崔北)(1712~1786 이후), 강세황(姜世晃)(1713~1791) 등은 조선 후기 최고의 여행지였던 금강산을 유람하고 기행사경도를 제작하였다. 화가들은 이전의 전통을 계승하여 내금강의 명승명소를 주로 그렸고, 자신들이 경험한 장소를 새롭게 시각화하였다. 이러한 기행사경도는 여행을 기념하며 동행자나 후원자를 위해 여러 장면을 담을 수 있는 화첩 형식으로 제작되었다. 개별적인 금강산 기행사 경도의 제작이 증가하는 가운데 1788년에 정조(正祖)(재위 1776~1800)가 도화서 화원인 김응환과 김홍도(金弘道)(1745~1806 이후)에게 영동9군과 금강산의 명승(名勝)을 그려오도록 명한 일은 공적 업무였다. 정조는 이들의 관계 및 지방관으로서의 경력, 서로 다른 화풍 등을 고려해 봉명사경의 화원으로 선발하였다. 김응환과 김홍도는 영조(英祖)(재위 1724~1776)조부터 도화서 화원으로 활동하며 선후배이자 동료로서 친밀한 관계를 유지했다. 나아가 이들은 영남 지역의 찰방(察訪)으로서 지방관의 업무를 수행한 경험이 있었다. 두 화원의 화풍은 서로 달라 김홍도는 부드럽고도 섬세하게 필선을 운용한 반면, 김응환은 굳세면서도 울창한 풍치를 잘 표현했다. 두 명의 화원은 각자의 개성으로 봉명사경 기간 동안 100여 폭의 초본을 그렸고, 이를 선별하여 60~70여 폭의 화첩 혹은 두루마리를 완성하였다. 이들의 그림은 18세기 전중반에 내금강과 관동팔경 위주로 제작된 금강산 기행사경도의 전통을 더욱 풍부하게 했고 영동과 외금강의 명승명소를 새롭게 발견하며 소재를 확장시켰다. 현재 《해악전도첩》은 원(元), 형(亨), 이(利), 정(貞) 4책으로 이루어졌는데, 원(元), 형(亨)책은 내금강의 그림 29점이며 이(利)책은 외금강의 장면 17점, 정(貞)책은 해금강과 관동팔경 14점으로 구성되었다. 비단 위에 그려진 각 그림은 기하학적으로 산석을 표현했으며, 연백으로 금강산의 암봉을 흰색 혹은 회청색으로 표현했다. 《해악전도첩》의 구도와 화법은 정선, 강세황, 심사정, 정충엽(鄭忠燁)(1725~1800 이후), 김응환, 김홍도의 화법과 비교할 수 있어 18세기 후반의 시대 양식을 갖는다. 특히 화첩의 일부 그림은 김홍도의 《해동명산도첩(海東名山圖帖)》(1788)과 구성 및 회화적 모티프가 매우 유사하여 두 화첩간의 연관성을 보여준다. 반면에 <영랑호>, <해산정>, <월송정> 등은 김홍도의 그림과는 구별된다. 이를 통해 화가가 김홍도와 영향을 주고받으면서도 자신만의 개성적인 화첩을 제작했음을 추측해 볼 수 있다. 《해악전도첩》에는 다른 화첩에는 등장하지 않는 <자운담>, <백운대>, <안문점망비로봉>, <백정봉> 등이 포함되어 있으며 각 장면마다 경물의 특징을 구체적이고 참신하게 묘사하였다. 특히, 화가는 산석을 기하학적으로 표현하고 선과 면을 도드라지게 하여 입체감을 강조하였다. 그는 남종화풍을 바탕으로 자신만의 화법을 확립했고 이를 자유자재로 운용하면서 화면에 동적인 리듬감을 부여했다. 이처럼 60점의 그림은 거칠고 파격적으로 보이지만 나름의 질서 안에서 일관성을 견지하고 있다. 본고는 화법과 봉명사경의 정황을 종합해 《해악전도첩》의 제작자를 김응환으로 추론하였다. 나아가 김하종(金夏鍾)(1793~1878 이후)의 《풍악권(楓嶽卷)》(1865년 이후)과의 친연성은 《해악전도첩》의 화가를 김응환으로 추정한 또 하나의 이유였다. 《해악전도첩》은 김홍도의 《해산첩》과는 달리 후대에 미친 영향력이 미비한데 김하종의 《풍악권》만이 《해악전도첩》의 소재와 화법을 따르고 있다. 김하종은 《풍악권》에서 50년 전, 춘천부사 이광문(李光文)(1778~1838)을 위해 제작한 《해산도첩》(1816)과는 전혀 다른 화법을 구사했다. 그는 김응환의 《해악전도첩》과 유사한 구성과 회화적 요소, 화보식 인물표현을 따르면서 사의적인 분위기를 강조하였다. 개성김씨의 일원이자 김응환의 종손인 김하종은 가문에 전해지는 《해악전도첩》류의 그림을 감상했고 이를 새롭게 번안했다고 추측된다. 화첩에 포함된 51편의 기문은 그림 다음 장에서 그려진 장소를 설명하고 있어 각 그림을 이해하고 감상하는 데 도움을 준다. 기문은 그림과 밀접한 관계를 가지며 앞의 장소로부터의 이동 정보, 이름의 유래, 지형적 특징, 관련 정보 등이 서술되었다. 이와 같은 백과사전식 혹은 지리지와 같은 기문은 19세기 전반에 나타나기 시작했으며, 금강산 화첩류에 더해졌다. 《해악전도첩》의 백화암 기문에는 1845년의 암자에 대한 중건 내용이 기록되어, 기문의 연대를 추정하는 중요한 근거가 되었다. 김하종에게 《풍악권》을 주문한 이유원(李裕元)(1814~1888)도 각 그림에 글을 붙였는데 이 글들은 김응환의 화첩에 포함된 기문 51편과 내용 및 서술방식이 흡사하다. 이유원의 기문은 《해악전도첩》의 기문이나 그 초고(원본)와 관련성이 높지만 두 화첩의 기문 필사의 선후관계를 판정하는 데에는 좀더 면밀한 검토가 필요하다. 《해악전도첩》은 김홍도의 봉명사경 초본 및 김홍도의 영향으로 제작된 19세기의 금강산 화첩과는 구별된다. 이 화첩은 화원 김응환의 회화세계를 이해할 수 있는 지평을 넓히고 18세기 후반 실경산수화의 또 다른 층위를 보여주고 있어 중요한 의미를 갖는다.

온라인 서비스 품질이 고객만족 및 충성의도에 미치는 영향 -항공권 예약.발권 웹사이트를 중심으로- (The Effects of Online Service Quality on Consumer Satisfaction and Loyalty Intention -About Booking and Issuing Air Tickets on Website-)

  • 박종기;고도은;이승창
    • 한국유통학회지:유통연구
    • /
    • 제15권3호
    • /
    • pp.71-110
    • /
    • 2010
  • 본 연구에서는 항공권 예약 발권 웹사이트의 서비스 품질을 측정 뿐만 아니라 서비스 회복도 측정하고자 하였다. 또한 서비스 품질과 서비스 회복이 고객만족 및 충성의도에 미치는 영향관계를 실증하고자 하였다. 온라인 서비스 품질과 온라인 서비스 회복의 측정을 위해 Parasuraman, Zeithaml, & Malhotra(2005)가 개발한 E-S-QUAL과 E-RecS-QUAL을 사용했으며, 했다. E-S-QUAL은 온라인 서비스 품질을 측정하는 도구로써, 효율성, 시스템 이용가능성, 이행성, 프라이버시의 4개 차원 22개 항목으로 구성된다. E-RecS-QUAL은 온라인 서비스 회복을 측정하는 도구로써, 반응, 보상, 접촉의 3개 차원 11개 항목으로 구성된다. 실증분석을 위한 설문조사는 항공사나 여행사의 웹사이트를 통해 국내 외 항공권을 구입해 본 경험이 있는 소비자를 대상으로 실시하였는데, 총 400부가 회수되었고, 이 중 342부를 최종분석에 사용하였다. 실증분석을 위해 AMOS 7.0과 SPSS 15.0을 사용하였다. 먼저, SPSS 15.0을 사용하여, 요인점수를 이용한 회귀분석으로 가설검증을 한 결과, <가설 I-1, 2, 3, 4, II-1, 2, 3, III-1, IV-1>이 전부 채택되었다. 온라인 서비스 품질과 온라인 서비스 회복의 각 차원은 모두 전반적인 서비스 품질에 유의한 영향을 보였고, 전반적인 서비스 품질은 고객만족에 유의한 영향을 미쳤다. 마지막으로 고객만족 역시 충성의도에 유의한 영향을 미치는 것으로 확인되었다. 한편 AMOS 7.0을 사용하여 모형 분석을 하였는데, 모형의 적합도는 가설검증을 하기에 합당한 수치가 나왔다. 이를 토대로 가설검증을 한 결과, <가설 I-1, 3, II-1, 3, III-1, IV-1>은 채택되었고, <가설 I-2, 4, II-2>는 기각되었다. 이 결과는 Parasuraman et al.(2005)이 주장한 것처럼 E-S-QUAL을 나타내는 데는 요인점수를 이용한 회귀분석이 더 적합하다는 것을 보여주는 것이라고 판단된다. 이를 토대로 본 연구의 시사점을 정리하였다.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF