• The Journal of the Acoustical Society of Korea
• /
• v.6 no.4
• /
• pp.12-20
• /
• 1987

Since People have serveral feelings for the sound according to its frequency the responses of sound frequencies for the people have been studies in this paper. The feelings of sound are investigated by questionaire thar are pure tones, waring sounds of automobile and sounds that white noise is passed by one and one-third octave bandpass filter. Experimental results have been shown that people have good response for the pure tone between 160(Hz) and 500(Hz), and have unpleasant response for the pure tone above 1000 (Hz), warning sounds of automobile, and for white noise. Warning sound of automobile horn has been mainly distributed between 1000(Hz) and 2600(Hz). Hence the resells are shown that the responses for warning sound of autombile horn are similar to that for pure tone between 100(Hz) and 2600(Hz). As a results, it is necessary to make warning sound of automobile horn have frequencies between 200(Hz) and 500(Hz) with low level in the residental districts and crowded streets.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.35-42
• /
• 2000

A cross-shaped microstripline-fed printed slot antenna having wide bandwidth Is presented in this paper. The proposed antenna is analyzed by using the Finite-Difference Time-Domain (FDTD) method. It was found that the bandwidth of the antenna depends highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The maximum bandwidth of this antenna is from 1.975 GHz to 4.725 GHz, which is approximately 1.3 octave, for the VSWR $\leq$ 2. Experimental data for the return loss and the radiation pattern of the antenna are also presented. and they are in good agreement with the FDTD results.e FDTD results.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.3
• /
• pp.215-220
• /
• 2016

Music braille is made up of more systematic and various symbols compared with text braille. Therefore, the translation of braille music requires extensive knowledge of the music and the braille symbols. Because currently the computer program for the text braille has already developed, we don't need any help from the braille translator. However, the translation of music braille is hard without the help of a professional music braille translator, because the translation computer program is not perfect. The current situation is that the music braille translator reads the music score and translates it into the braille himself. In this paper, we designed and implemented the "Braille Music Converter", you can implement a person does not understand the braille translation into music braille well. It includes translation into text braille for the lyrics processing and rest, octave, key signature, time signature, tie, slur, repeat mark was confirmed that the successful conversion to the actual music score.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1381-1387
• /
• 2015

This paper proposes a sketch drawing system called m-shaper for musical shape generation. Through simple sketch drawing, users can generate musical shape configuration which can be played by a computer. One key ingredient of the process is a unique concept for the interactive musical shape generation that combines shape and sound based on the designers' manual inputs. m-shaper captures the numerical values of drawing characteristics and determines how the musical notes and shapes can be generated. Using a tablet, four sketch movements are captured such as pressure, tilt, rotation and speed. Each point of a shape corresponds to a certain musical note that represents a type of instrument, duration, pitch, and octave. The current m-shaper has been developed as a computational tool for supporting the schematic design process. Designers in m-shaper draw geometric sketches with a musical inspiration and explore possible conceptual forms. They also can control the parameters for results and transform their sketch drawing.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.93-101
• /
• 2013

PURPOSES : The rumble strip installed at the highway near the tollgate has the purpose to reduce the vehicle velocity or prevent sleepiness by awakening people to the danger. These rumble strip has different vibration decibel from the rumble strip shapes, resulting in some fatigue damage to human because a driver suffers from a lot of stress and displeasure. In this connection, the objective of this paper is to analyze the vibration decibel perceived by a driver in the vehicle under some conditions. METHODS : The vibration decibel conveyed from the tire can be analyzed. The frequency analysis methods were used according to DFT (Discrete Fourier Transform) analysis, FFT (Fast Fourier Transform) analysis, CPB (Constant Percentage Bandwidth) analysis. But the frequency analysis method in this paper is the 1/24 OCT(Octave) band analysis because of the convenience of the analysis and the overall vibration amplitude along the frequency. RESULTS : By using the results of the vibration decibel after analyzing the 1/24 OCT band analysis, these results can be compared from some conditions (e.g., rumble strip shape, uniform velocity of a vehicle, road condition, mass of a vehicle). As a result, the numerical values of decibel are not directly proportional to the vehicle velocity. CONCLUSIONS : At the condition that a vehicle is passing by the rumble strip, the value of a vibration decibel at the rumble strip of the cylinder shape is smaller than the rumble strip of rectangular shape regardless of the rumble strip depth and width. At the mass condition, the more a vehicle is massive, the more the vibration decibel increases. At the road condition, the vibration decibel at the wet road is smaller than the value at dry road condition.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.79-91
• /
• 2013

PURPOSES : The methods of measuring the sound from the noise source are Pass-by method and NCPX (Noble Close Proximity) method. These measuring methods were used to determine the linkage of TAPL (Total Acoustic Pressure Level) and SPL (Sound Pressure Level) in terms of frequencies. METHODS : The frequency analysis methods are DFT (Discrete Fourier Transform) and FFT (Fast Fourier Transform), CPB (Constant Percentage Bandwidth). The CPB analysis was used in this study, based on the 1/3 octave band option configured for the frequency analysis. Furthermore, the regression analysis was used at the condition related to the sound attenuation effect. The MPE (Mean Percentage Error) and RMSE (Root Mean Squared Error) were utilized for calculating the error. RESULTS : From the results of the CPB frequency analysis, the predicted SPL along the frequency has 99.1% maximum precision with the measured SPL, resulting in roughly 1 dB(A) error. The TAPL results have precision by 99.37% with the measured TAPL. The predicted TAPL results at this study by using the SPL prediction model along the frequency have the maximum precision of 98.37% with the vehicle velocity. CONCLUSIONS : The Predicted SPL model along the frequency and the TAPL result by using the predicted SPL model have a high level of accuracy through this study. But the vehicle velocity-TAPL prediction model from the previous study by using the log regression analysis cannot be consistent with the TAPL result by using the predicted SPL model.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.19-25
• /
• 2016

Recently, drivers have begun to regard comfort in the cabin as one of the most important factors in construction equipment like forklifts. Accordingly, it has become more important to design a forklift cabin with a better sound quality as well as lower sound level, which can make a driver more comfortable. In this paper, the correlation between subjective evaluation and Zwicker's sound quality index was analyzed through a blind test by a few workers in forklifts and other construction equipment in several countries. Correlation analysis showed that Loudness and Sharpness were ranked in sequence, and tendencies were different from country to country. Also, contribution analysis for Loudness and Sharpness using operational transfer path analysis (OTPA), which is widely used in the field of noise, vibration, and harshness (NVH), was performed. However, Loudness and Sharpness cannot be used with OTPA directly because there are no linear relationships between the sources and receivers. In this paper, both are calculated by applying the DIN 45631 method with a contribution rate (%) of 1/3 Octave Sound Pressure Level by OTPA method in addition to considering spectral masking.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.522-522
• /
• 2017

하천에서 식생은 하도내 흐름저항과 항력을 증가시켜 유속과 유사이동을 감소시킨다. 유속의 감소로 인해 유사가 퇴적되어 사주 발생이 증가하며 이는 하도 지형변화의 중요한 요인이 된다. 하천내 식생은 하천생물의 서식과 밀접한 관련이 있는 물리적인 서식환경을 변화시키게 된다. 이러한 물리적인 서식환경 변화는 수중음향으로 표현되는 하천의 음환경(Soundscape) 변화로 연결된다. 본 연구는 하천 식생대에서의 수중 음향변화를 식생유무, 수온, 수심에 따라 분석하고 수리학적 특성과의 상관관계를 파악하고자 한다. 실규모 하천 수로에 식생 38 주/$m^2$를 식재하고 1 m정도 성장시킨 후 식생을 완전 침수시켜 $3.2m^3/s$의 유량을 공급하여 유속의 변화와 수중음향을 측정하였다. 오후시간대와 새벽시간대를 이용하여 수온이 다른 조건에서 측정하였고, 수심은 표면 3 cm, 40 cm, 80 cm 깊이에서 각각 측정하였다. 측정지점은 식생구간의 상류지점(A), 식생구간(B), 식생구간의 하류지점(C) 세 곳을 선정하였고, 유속은 micro-ADV, 수중 음향은 Hydrophone을 사용하여 5분간 측정하였다. 측정 주파수 spectrum은 1/3 Octave band로 처리하여 음압을 비교분석하였다. 주파수에 따른 음압을 분석한 결과 측정지점에 관계없이 주로 125 Hz, 315 Hz에서 높게 나타났다. 수심에 따른 음향을 분석한 결과 식생이 없는 상류(A)지점에서는 수중음향의 차이가 크게 나타났으며, 식생지점(B)과 식생이 없는 하류(C)지점에서는 수중음향이 유사하게 나타났다. 이는 식생에 의한 유속의 저하로 인해 흐름이 안정화되어 나타나는 현상으로 판단된다. 수온에 따라서는 식생구간(B)과 하류(C)지점에서 대체로 큰 차이를 보이지 않았으나 상류(A)지점에서는 수온이 높을 때 음압이 더 크게 나타났다. 이는 온도가 높을수록 소리의 전달속도가 더 빨라지기 때문으로 판단된다. 이처럼 식생의 유무와 수심, 온도에 따라 하천의 수리학적 특성이 달라지고 이에 따른 수중음향도 달라지므로 하천의 물리적 서식환경을 평가하기 위한 인자로 수중음향을 활용할 수 있을 것으로 사료된다.

• Smart Structures and Systems
• /
• v.16 no.1
• /
• pp.141-162
• /
• 2015

The magneto-rheological visco-elastomer (MRVE) is used as a smart core to control the stochastic micro-vibration of a sandwich plate with supported mass. The micro-vibration response of the sandwich plate with MRVE core and supported mass under stochastic support motion excitations is studied and compared to evaluate the vibration suppression capability. The effects of the supported mass and localized magnetic field on the stochastic micro-vibration response of the MRVE sandwich plate are taken into account. The dynamic characteristics of the MRVE core in micro-vibration are described by a non-homogeneous complex modulus dependent on vibration frequency and controllable by applied magnetic fields. The partial differential equations for the coupled transverse and longitudinal motions of the MRVE sandwich plate with supported mass are derived from the dynamic equilibrium, constitutive and geometric relations. The simplified ordinary differential equations are obtained for the transverse vibration of the MRVE sandwich plate under localized magnetic fields. A frequency-domain solution method for the stochastic micro-vibration response of sandwich plates with supported mass is developed based on the Galerkin method and random vibration theory. The expressions of frequency-response functions, response power spectral densities and root-mean-square velocity responses of the plate in terms of the one-third octave frequency band are obtained for micro-vibration evaluation. Finally, numerical results are given to illustrate the large response reduction capacity of the MRVE sandwich plate with supported mass under stochastic support motion excitations, and the influences of MRVE parameters, supported mass and localized magnetic field placement on the micro-vibration response.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.3 s.26
• /
• pp.193-199
• /
• 2006

The noise levels on board ship recognized at Europe in the early 1970s and the noise regulations on the ship began to put in a statutory form. After that, in 1982 'International Code on Noise Levels on Board Ships' adopted by IMO and it became a standards to the newly built ship and it remains up to recently. Especially, the ship engine room, which have huge main engine and various kinds of subsidiary machines, is under an extremely loud condition and so the worker who works in it is easy to lose his hearing. Recently, each nation regulates the allowable noise exposure time by law to protect the industrial employee from the occupational hardness of hearing. In our country, the allowable noise exposure time is regulated by the labor. standard law but the international provisions regulated by IMO have been applied in case of the ship engine room. In this paper, the cabin's noise levels of cargo-passenger ships plies south-west coast line were investigated.