• 펄프종이기술
• /
• 제43권2호
• /
• pp.77-82
• /
• 2011

The changes in the wet pressing response of old corrugated container(OCC) stock depending on the beating treatment and the addition of polymer aids were investigated with laboratory roll press instrument. Two types of polymer aids, such as high molecular weight polymer with low charge density and low molecular weight polymer with high charge density, were applied in this study. The more beaten OCC stock showed the lower dryness after wet pressing. The addition of polymer aids had great influences on the wet pressing efficiency and paper properties. The dryness after wet pressing was increased by the addition of polymer aids, but the pattern of changes in dryness were different depending on the type of polymer and the properties of stock. The higher molecular weight polymer aids showed the greater increase in the dryness. The properties of paper such as air permeability, bulk, formation, tensile strength were also greatly affected by the addition of polymer aids.

• 한국정보과학회논문지:데이타베이스
• /
• 제28권3호
• /
• pp.458-467
• /
• 2001

낙관적 2단계 잠금(O2PL)은 클라이언트 캐쉬를 적절히 사용하고 상대적으로 적은 네트워크 요구량으로 인하여 다른 기법보다 좋거나 같은 성능을 나타낸다. 그러나, 모든 잠금을 얻을 때까지 해당 트랜잭션이 완료될 수 없게 때문에 O2PL은 필요없는 기다림을 만든다. 또한, 낙관적 병행수행 제어(OCC) 기법은 필요없는 철회를 만든다. 본 논문은 이러한 단점들을 완화시킬 수 있는 효율적인 낙관적 캐쉬 일관성 유지 기법을 제안한다. 제안하는 기법은 트 랜잭션의 완료나 철회를 기다림 없이 결정하며 철회율을 최소화하기 위하여 트랜잭션 재배 열을 사용한다. 제안하는 기법은재배열 기법을 사용함에도 불구하고 각 데이터 당 하나의 버전만을 필요로 한다. 마지막으로, 본 논문은 정량적 평가결과를 통하여 제안하는 기법이 O2PL과 OCC 보다 좋은 성능을 나타낸다는 것을 보인다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.19-28
• /
• 1996

In Asia countries the productions of ship building and marine engines have been increasing, specially Japanese marine industries have worked hard after 1960s and Korean ones after 1980s. Recently the other countries, as Taiwan and China, have been working so that these hour Asian countries are occuping the high level of shared ratio of productions for gross tonnages and horse powers, which are 74 and 64[%] of the world ones ($8.6\times10$+6[GT], $8.6\times10$+6[PS]) in 1994. Korean industries had the highest shared ratio of production of tanker vessel and 2 stroke diesel engine as 45[%]($2.2\times10$+6[GT]) and 37[%]($1.0\times10$+6[PS]) which were more than those of Japan as 34 and 16[%] in 1989 respectively. Some marine databases and their network links among Asian countries are proposed due to the posibility of collection and analyses with their own specifications by the marine industries and operators as well as Japanese ship reliability investigation works(SRIW) like SRIC in Japan. During 1966 and 1996 16 times of SRIW in Japan have been carried out by ship reliability investigation group(SRIG) in Japan. There have been collected and evaluated a great number of field data of failures and maintenances($700\times10$+3[occ], $1.6\times10$+6[MH}) during running hours($13.4\times10$+6[Hrs]), from which many kinds of evaluation indices could be gotten as the three indices of occurring rate$\lambda$(52.2[occ/1000Hrs]), average man-hour mh(2.29[MH/occ]) and manning index MI(119[MH/1000Hrs]). An estimation example having the three indices$\lambda$, mh and MI were shown by the SRIC 1990 Data Base in Japan for the two kinds of fuel oil suppling subsystems which are dual fuel oil one(DFOS) and mono fuel oil one(MFOS). Three indices MI, and mh for DFOS and MFOS results in 7.16 and 5.20[MH/1000Hrs], 2.63 and 2.06[occ/1000 Hrs]. Therefore the more simple subsystem MFOS can save approximately 30[%] of maintenance load. Finlly an utilization methods are shown for the SRIC in Japan by means of computer system and worlwide internet links.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.71-71
• /
• 2000

Recycled fibers usually give slow drainage in the paper forming zone on papermachine, which limit the application of more refining to the fibers for improving paper strength and formation. To use recycled fibers, especially, OCC, more effectively, developing very efficient handling technique of short fibers and fines is inevitable. We tried to make hard flocs of fractionated short fibers and fines, which were the main cause of slow drainage, by adding excessive amount of retention aid on them. This technique was proved to increase drainage with no difference in strength properties, compared to the conventional technique of adding the same amount of polymers to the whole furnish in the lab test. The bonding capability of short fibers and fines in Korean OCC were very poor to be considered as ´fillers´in paper products. Various chemical treatment on the short fibers and fines of the Korean OCC did not improve their bonding and optical properties. One of the reasons of no improvement in their properties was thought to be their high amount of ashes (over 30% in the fractionated samples).

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.471-474
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as old corrugated containers (OCC) and old newspapers (ONP) with a vacuum forming method. The plate-like cushioning materials made of OCC and ONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^{3}$) were a little higher than that of EPS (${\approx}0.03g/cm^{3}$) and much lower than that of pulp mold (${\approx}0.3g/cm^{3}$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of OCC fibers containing more lignin than ONP show better shock-absorbing properties than ONP Moreover, the cushioning materials made of OCC and ONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to an increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a great role in improving shock-absorbing ability.

• Safety and Health at Work
• /
• 제3권1호
• /
• pp.71-76
• /
• 2012

Malignant mesothelioma is an uncommon but rapidly fatal disease for which the principal aetiological agent is exposure to asbestos. Mesothelioma is of particular significance in Australia where asbestos use was very widespread from the 1950s until the 1980s. Exposure to asbestos includes occupational exposure associated with working with asbestos or in workplaces where asbestos is used and also 'take-home' exposure of family members of asbestos exposed workers. Asbestos exposure may also be nonoccupational, occurring as a consequence of using asbestos products in non-occupational contexts and passive exposure is also possible, such as exposure to asbestos products in the built environment or proximity to an environmental source of exposure, for example an asbestos production plant. The extremely long latency period for this disease makes exposure assessment problematic in the context of a mesothelioma registry. OccIDEAS, a recently developed online tool for retrospective exposure assessment, has been adapted for use in the Australian Mesothelioma Registry (AMR) to enable systematic retrospective exposure assessment of consenting cases. Twelve occupational questionnaire modules and one non-occupational module have been developed for the AMR, which form the basis of structured interviews using OccIDEAS, which also stores collected data and provides a framework for generating metrics of exposure.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.285-297
• /
• 2007

As the demands of environment protection increase, the pulp mold container is developed to substitute for the plastic cushion materials like EPS(expanded poly styrene). The water-absorbing ratio, tensile strength and compressive strength of pulp mold are important factors to evaluate its shock absorbing characteristics. The study was performed to investigate the effects of the mechanical property changes on the various conditions of temperature and relative humidity for pulp mold containers made of mixed materials on ONP(old newspaper) and OCC(old corrugated container). This study also is evaluated the optimized mixing ratio of materials for making pulp mold by analyzing the changes of physical properties according to a various procured temperature and relative humidity conditions. The results show that the water absorption ratio of sample increased significantly, and tensile strength decreased $20{\sim}30%$, compressive strength decreased $10{\sim}20%$ by increasing relative humidity condition. And the results show that the ONP 50% and OCC 50% was optimized mixing ratio according to the samples.

• 한국위성정보통신학회논문지
• /
• 제11권1호
• /
• pp.21-25
• /
• 2016

본 논문에서는 이기종 통신 기반의 스마트 조명의 선택적 알고리즘을 제안한다. 스마트 조명은 조명의 역할뿐만 아니라 통신의 역할을 동시에 수행한다. 이기종 통신을 이용한 스마트 조명의 BER 성능을 높이기 위해, Line-of-Sight(LOS)/Non-LOS 채널에서 스마트 조명과 센서와의 거리, 조명사용시간, 사용자 요구를 위한 낮은 전력소모량에 따라 Optical Camera Communication(OCC), Wi-Fi, BLE 중 적합한 통신방식을 선택하도록 하였다. 그리하여 LOS/NLOS 채널에서 제안된 알고리즘의 성능과 기존의 방식과의 시뮬레이션 결과 비교를 통해 성능 향상을 확인하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 춘계학술발표논문집
• /
• pp.17-17
• /
• 2002

국내 제지 산업에서 큰 비중을 차지하고 있는 골판지 원지는 주로 국내에서 발생되는고지를 원료로 생산되고있다. 2001년 제지 통계에 따르면 우리나라의 고지재활용율은 세계 최고 수준으로 지류 재활용 비율이 약 72%에 달하며 그중 국산 폐지사용량은 해마다 꾸준히 증가하여 2001년 62%에 이르렀다. 하지만 고지의 재활용율이 증가함에 따라 많은 기술적, 품질적 문제가야기되어 강도저하, 공정 및 품질 저하가 날로 심각해지고있는 것이 현실이다. 본 연구에서는 국내 골판지 원지의 해섬특성을 알아보고 조성이 상이한 원료 물질의 해섬특성 곡선을 조사한 후 골판지 원지의 원료로 가장 널리 사용되고 있는 KOCC의 물성개선 가능성을모색하기 위해 분급 및 기계적 처리를 적용하고 도입 효과를 살펴보았다. 다양한 조성으로 구성된 OCC 고지의 해리에 따른 해섬 현상을 살펴보기 위해 각각의 원지와 조성이 상이한 원료물질의 해섬 특성 곡선을 조사하였다. 저농도 해리기를 이용하여 농도와 revolution의 변수를 주어 해리를 실시하고 스크린을 이용하며 미해리분을 측정하여 해섬 특성 곡선을 평가하였다. 또한 가장 널리 사용되고 있는 원료인 KOCC의 분급에 의한 물성 개선 가능성을 모색하기 위해 실험실적인 모텔링에 의한 분급과 기계적인 처리를 실시하여 물성을 평가하였다. 모델링은 UKP와 KOCC 100%인 골판지 원지를 이용하였으며 압축강도, 인장강도, 파열강도를 측정하였다. 현장에서의 적용가능성을 살펴보기 위해 현장에서의 Multi fractor를 이용하여 분급된 지료를 채취하여 물리적인 처리를 가한 후 수초하여 물성을 평가하였다. 그 결과 분급 및 기계적인 처리에 의한 펄프의 특성은 단섬유의 재활용에 대한 고려가 있을 경우 물성개선을 위한 해결방법으로 활용될 수 있다고 판단되었다.