• Korean Journal of Crystallography
• /
• v.16 no.2
• /
• pp.141-148
• /
• 2005

It is well known that the general metals have a lot of grain boundaries. The grain boundaries play a negative role to increase the resistivity and to decrease the conductivity. The small resistivity and the large conductivity have been a goal of the material scientists, and no signal noise, perfect signal transfer, and the realization of the real sound are the dream of electronic engineers and audio manias. Generally, oxygen free copper (OFC) and Ohno continuous casting (OCC) copper cables have been used for the purpose of the precise signal transfer and low noise. However they still include a lot of grain boundaries. In our study, we have grown the single crystal by the Czochralski method and succeeded to produce single crystal wires from the crystal in the dimension of $0.5{\times}0.5{\times}2500mm$. The produced wire still possesses very good single crystal properties. We observed the structure of the wire, and measured the resistance and impedance. Glow Discharge Spectrometer (GDS) was used for analyzing the compositions of copper single crystals and commercial copper. Current-Voltage curve, resistance, total harmonic distortion and speaker frequency response were measured for comparing electrical and acoustic properties of two samples.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.38-45
• /
• 2015

Fold cracking is one of quality troubles of coated papers. In this study, the fold cracking of high grammage ($250g/m^2$) coated paper made with the different pulp composition and layer structure of base paper was investigated. The single layered, high grammage base paper was prepared by mixing of hardwood and softwood bleached kraft pulp fibers with the different ratios. The high grammage coated paper showed the higher fold cracking than low grammage coated paper because of the increase in thickness. The increase in the content of softwood pulp fibers reduced the fold cracking in the case of high grammage coated paper. When the creasing process was conducted before folding process, the fold cracking of coated paper decreased. By manufacturing the base paper with multiply structure, the fold cracking of coated paper could be reduced significantly, especially when the BCTMP and OCC were used as a middle layer and the creasing process was carried out. The delamination of layers in base paper affected the fold cracking positively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1813-1816
• /
• 2015

Background: The aim of this study was to research the importance of the neutrophil to lymphocyte ratio (NLR) in prediction of PSA recurrence after radical prostatectomy, which has not been reported so far. Materials and Methods: The data of 175 patients who were diagnosed with localised prostate cancer and underwent retropubic radical prostatectomy was retrospectively examined. Patient pre-operative hemogram parameters of neutrophil count, lymphocyte count and NLR were assessed. The patients whose PSAs were too low to measure after radical prostatectomy in their follow-ups, and then had PSAs of 0,2 ng/mL were considered as patients with PSA recurrence. Patients with recurrence made up Group A and patients without recurrence made up Group B. Results: In terms of the power of NLR value in distinguishing recurrence, the area under OCC was statistically significant (p<0.001) .The value of 2.494 for NLR was found to be a cut-off value which can be used in order to distinguish recurrence according to Youden index. According to this, patients with a higher NLR value than 2.494 had higher rates of PSA recurrence with 89.7% sensitivity and 92.6% specificity. Conclusions: There are certain parameters used in order to predict recurrence with today's literature data.We think that because NLR is easy to use in clinics and inexpensive, and also has high sensitivity and specificity values, it has the potential to be one of the parameters used in order to predict biochemical recurrence in future.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.116-120
• /
• 2014

Visible Light Communication is one of the promising technologies for wireless communication due to the possibility to use existing LED lightening infrastructure to transmit data. LED has the ability to turn on and off very fast enough that our human eyes can't recognize so it can be used to transmit data via visible light along with illumination. But it faces flicker problem due to the brightness discrepancies between '1' and '0' bit patterns inside a data frame. Various run length limited (RLL) coding scheme like Manchester code, 4B6B, 8B10B or VPPM can be used to solve flickering problem. So we propose pseudo Manchester codding which can transmit data without modifying LED modulator and demodulator circuit as well as solve flickering problem.

• Journal of KIISE:Databases
• /
• v.29 no.6
• /
• pp.477-491
• /
• 2002

The broadcast environment has asymmetric communication aspect that is typically much greater communication bandwidth available from server to clients than in the opposite direction. In addition, mobile computing systems generate mostly read-only transactions from mobile clients for retrieving different types of information such as stock data, traffic information and news updates. Since previous concurrency control protocols, however, do not consider such a particular characteristics, the performance degradation occurs when previous schemes are applied to the broadcast environment. In this paper, we propose optimistic concurrency control based on timestamp interval for broadcast environment. The following requirements are satisfied by adapting weak consistency that is the appropriate correctness criterion of read-only transactions: (1) the mutual consistency of data maintained by the server and read by clients (2) the currency of data read by clients. We also adopt the timestamp Interval protocol to check the weak consistency efficiently. As a result, we improved a performance by reducing unnecessary aborts and restarts of read-only transactions caused when global serializability was adopted.

• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.358-368
• /
• 1994

Major factors in reducing the stacking strength of corrugated fiberboard boxes in cold storage or transport conditions are high relative humidity, causing elevated moisture absorption by the boxes. The bottom boxes in a stack will deform to the critical deflection causing agricultural products damage there, and eventually additional deflection will cause box collapse and finally toppling of the stack. The study was conducted to determine the water absorption characteristics and the compressive strength of the corrugated fiberboard boxes being widely used in packaging agricultural products in Korea. The sample boxes for the study were selected from the regular slotted containers (RSC) types, and one was the box used in apple packaging (Box A), another one was the box used in pear packaging (Box B). The corrugated shipping containers were made from a large portion of recycled fibers in Korea, and comparing with Box B, Box A was fabricated from fiberboard which contained more percentage of old corrugated containers (OCC) imported from foreign countries than domestic waste paper. The results obtained from the study were summarized as follows ; 1. Equilibrium moisture content (EMC) of the sample boxes was established after about 20 hours, and the EMC by absorption was lower than that by desorption. The EMC increased with the increasing of relative humidity and with the decreasing of temperature, and the rate of increasing was much higher above the relative humidity of 50%. 2. The maximum compressive strength of Box A was about 100 kgf greater than that of Box B on the same enviromental conditions. The strength of the sample boxes decreased rapidly with the increasing of relative humidity. The effect of relative humidity on the strength was a little higher than that of temperature. 3. As the applied load was progressively increased and a level was reached, the vertical side panels ($L{\times}D$) deflected laterally inwards or outwards. The panels deflected laterally inwards at higher relative humidity. 4. The maximum compressive deflection ratio and the critical deflection ratio of the sample boxes were increased linearly with the increasing of relative hunidity, but trends for its ratios showed inconsistant response to temperature.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.50-57
• /
• 2014

In this study, we investigated the physical properties of kraft pulps made from rice husk, peanut husk and garlic stems. These agricultural byproducts were collected individually, and then various pulps were manufactured from them by controlling active alkali, sulfidity, reaction time and the liquor ratio in the kraft pulping process in order to analyze the applicability of these agricultural byproducts as raw materials for kraft pulps. After kraft pulping, we measured yield, flake content, fiber length, fiber width and freeness of pulps, and the fiber shapes of the pulps were observed by using an optical microscope. When the higher active alkali, longer reaction time and lower liquor ratio were applied in kraft pulping process, reject content decreased and fiber yield increased. The pulp from garlic stems had the longest fiber length and that from rice husk showed the highest intial freeness. All of the pulps from agricultural byproducts showed higher initial freeness, shorter fiber length and the similar fiber width compared to OCC, BCTMP and hardwood BKP. The fibers of the pulps made from agricultural byproducts showed a similar shape to those of commercial pulps. It was concluded that these agricultural byproducts had a potential as raw materials to produce an alternative pulp to the commercial pulps.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.271-278
• /
• 2006

We used polymers of alternating cationic and anionic nature to build up shells on fiber surfaces, strengthen the worn-out fibers and improve paper properties made from such fibers. OCC and ONP pulps were either dipped or salted out in the cationic polyallylamine, polyacrylamide and starch solutions. After centrifugal drying, these were followed by treatments in anionic polyacrylic acid, poly-acrylamide, and starch solutions, respectively. The shell-enhanced fibers were formed into handsheets and their physical properties evaluated. The results show that building multiple shells on worn-out fiber surfaces can strengthen the fibers and paper. The simpler and more practical impregnation-centrifuging treatment provided the desired effects, whereas salting out the polymers produced somewhat superior fibers. The latter process, were impractical, however. The first pair of polymeric shells imparted marked strength improvement, whereas later layers had diminishing efficacies. Overall, the methods can improve fiber quality, attaining paper strength requirements without resorting to expensive measures. Alternate cationic polymer and filler powders were also deposited on fiber surface based on the micriparticle system in an anticipation of stiffness gains. Platy minerals, such as montmorillonite, bentonite, sericite, clay and talc were added following cationic PAM. After dewatering of polymer-pigment shelled fiber of one to 3 pairs of layers, handsheets either calendered or uncalendered were evaluated. The results indicate that regardless of calendaring, stiffness of the handsheets did not improve appreciably while certain other strength properties showed gains. We also attempted the novel starch gel filler addition method wherein tapioca starch and filers (PCC, sericite or clay) were mixed at high solids content of 50% and cooked until gelatinized. The filled handsheets were dried under various conditions and then tested for their properties. Improvements in strengths of modified filled paper were observed.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.422-430
• /
• 2018

Rolling shutter operation of CMOS cameras can be utilized in optical camera communications in order to transmit data from an LED to mobile devices such as smart-phones. From temporally modulated light, a spatial flicker pattern is obtained in the captured image, and this is used for signal recovery. Due to the degradation of rolling shutter images caused by light smear, motion blur, and focus blur, the conventional decoding schemes for rolling shutter cameras based on the pattern width for 'OFF' and 'ON' cannot guarantee robust communications performance for practical uses. Aside from conventional techniques, such as polynomial fitting, histogram equalization can be used for blurry light mitigation, but it requires additional computation abilities resulting in burdens on mobile devices. This paper proposes a transition-based decoding scheme for rolling shutter cameras in order to offer simple and robust data decoding in the presence of image degradation. Based on the designed synchronization pulse and modulated data symbols according to the LED dimming level, the decoding process is conducted by observing the transition patterns of two sequential symbol pulses. For this, the extended symbol pulse caused by consecutive symbol pulses with the same level determines whether the second pulse should be included for the next bit decoding or not. The proposed method simply identifies the transition patterns of sequential symbol pulses other than the pattern width of 'OFF' and 'ON' for data decoding, and thus, it is simpler and more accurate. Experimental results ensured that the transition-based decoding scheme is robust even in the presence of blurry lights in the captured image at various dimming levels

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.2
• /
• pp.100-106
• /
• 2009

Purpose: The study was to assess I-123-N-(3-iodopropen-2-yl)-2[beta]-carbomethoxy-3[beta]-(4-cholorophenyl) tropane(IPT) SPECT in differential diagnosis among early stage of Parkinson's disease(PD) and essential tremor(ET) and normal control(NL) groups quantitatively. Materials and Methods: I-123 IPT brain SPECT of 50 NL, 20 early PD, 30 advanced PD, and 20 ET were performed at 20 minutes and 2 hours. Specific/nonspecific binding of striatum was calculated by using right and left striatal specific to occipital non-specific uptake ratio(striatum-OCC/OCC). Results: Mean value of specific/nonspecific binding ratio was significantly different between advanced PD group and NL group. However, significant overlap of striatal specific/nonspecific binding ratio was observed between PD group and ET group. Bilateral striatal specific/nonspecific binding ratios were decreased in advanced PD. Lateralized differences in the striatal uptake of I-123 IPT correlated with asymmetry in clinical findings in PD group. Conclusion: I-123 IPT SPECT may be a useful method for the diagnosis of PD and objective evaluation of progress of clinical stages. Care should be made in the differential diagnosis of early stage of PD and other motor disturbances mimicking PD such as ET in view of significant overlap in striatal I-123 specific/nonspecific binding ratio.