• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.73-82
• /
• 1997

Regional myocardial blood flow (rMBF) can be noninvasively quantified using N-13 ammonia and dynamic positron emission tomography (PET). The quantitative accuracy of the rMBF values, however, is affected by the distortion of myocardial PET images caused by finite PET image resolution and cardiac motion. Although different methods have been developed to correct the distortion typically classified as partial volume effect and spillover, the methods are too complex to employ in a routine clinical environment. We have developed a refined method incorporating a geometric model of the volume representation of a region-of-interest (ROI) into the two-compartment N-13 ammonia model. In the refined model, partial volume effect and spillover are conveniently corrected by an additional parameter in the mathematical model. To examine the accuracy of this approach, studies were performed in 9 coronary artery disease patients. Dynamic transaxial images (16 frames) were acquired with a GE $Advance^{TM}$ PET scanner simultaneous with intravenous injection of 20 mCi N-13 ammonia. rMBF was examined at rest and during pharmacologically (dipyridamole) induced coronary hyperemia. Three sectorial myocardium (septum, anterior wall and lateral wall) and blood pool time-activity curves were generated using dynamic images from manually drawn ROIs. The accuracy of rMBF values estimated by the refined method was examined by comparing to the values estimated using the conventional two-compartment model without partial volume effect correction rMBF values obtained by the refined method linearly correlated with rMBF values obtained by the conventional method (108 myocardial segments, correlation coefficient (r)=0.88). Additionally, underestimated rMBF values by the conventional method due to partial volume effect were corrected by theoretically predicted amount in the refined method (slope(m)=1.57). Spillover fraction estimated by the two methods agreed well (r=1.00, m=0.98). In conclusion, accurate rMBF values can be efficiently quantified by the refined method incorporating myocardium geometric information into the two-compartment model using N-13 ammonia and PET.

• Korean Journal of Agricultural Science
• /
• v.26 no.1
• /
• pp.21-30
• /
• 1999

To increase the strength properties of recycled fiber, especially OCC (Old Corrugated Container) in this study, we used the mechanical pretreatment on the fibers before refining. The mechanical action in the Hobart mixer induced high shear and compression on the fibers, which resulted in the breakdowns of fiber internal structure, and microcompressions on the surface of the fibers. We evaluated the degree of mechanical treatment by fiber curl index. Four different refining techniques were applied to the pretreated fibers (Valley beater, Kady mill, PFI mill, and Impact refining) to find the best combination of the pretreatment and the refining methods. Conclusions were summarized as followed. 1. In keeping the fiber length from shortening, Kady mill and PFI mill refining were effective. Kady mill and Valley beater application tended to straighten out the fiber shapes. 2. Valley beating increased the breaking length of the handsheets better than other methods, while lowering the tear strength most. The mechanical pretreatment increased breaking length about 10% in average irrespective of four different refining methods. 3. Tear strength was increased by the mechanical pretreatment and by the PFI mill refining. 4. Burst strength was increased by the mechanical pretreatment and by valley beating method. 5. In increasing the breaking length and burst strength while keeping tear strength, combination of mechanical pretreatment and Valley beating were most effective.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.4175-4179
• /
• 2016

Background: Oral cavity cancer (OCC) is one of the most common cancers worldwide. No studies have reported on the prevalence and epidemiologic risk factors of oral premalignant lesions (OPLs) in Thailand. The purpose of this study was to investigate the prevalence of OPLs and associated factors in Roi Et Province, Thailand. Materials and Methods: To investigate the prevalence of OPLs, a cross-sectional descriptive study was conducted in which 2,300 subjects over 40 years of age were recruited and screened for the prevalence of OPLs. To identify factors associated with OPLs, a matched case-control study was used in which the subjects were 102 cases with OPL and 102 matched controls without OPLs. The studies were conducted in Roi Et Province during the period 1 February, 2014, to 30 April, 2014, and the data were collected by the use of a structured interview questionnaire and by extraction of information from medical records. Data analyses involved the use of descriptive statistics, McNemar's test, and conditional logistic regression. Results: The overall prevalence of OPLs was 3.8%, and no-one was diagnosed with more than one type of OPL. The factors found to be associated with a statistically significant higher risk of an OPL were betel nut chewing, smoking, and alcohol consumption. The associations with these factors were strong, especially for betel nut chewing and smoking. Conclusions: The habits of betel nut chewing, smoking, and alcohol use are confirmed as factors associated with OPLs in a population of Roi Et Province, Thailand. Campaigns to reduce such risk healthy behaviour are needed, but whether any actual decrease will prevent the eventual transformation of an OPL into an OCC remains an open question.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.34-41
• /
• 2000

Recently many scientists have tried to synthesize biodegradable polymers due to durable and non-biodegradable products of conventional synthetic plastics when these were wasted in nature. So to reuse the wastepapers for biodegradable polymer resources, ONP (old newsprint), OCC (old corrugated containerbpard) were carried out by the pretreatment of chlorinite, hypochlorite and oxygen-alkali treatment conditions. For manufacturing of biodegradable polymer with wastepaper, this study performed to investigate change of chemical components and optimal pretreatment condition. The summarized results in this study were as follows: Lignin content in ONP and OCC was was higher than in MOW and ash content was the highest in MOW. More amount of ash components were reduced by wet defiberation than by dry defiberation. Wet defiberation fiber are better than dry defiberated fiber in chemical pretreatment condition for wastepapers, and the best result was obtained in the condition of sodium chlorite at $70^{\circ}C$, because it has high delignification ratio, ${\alpha}$-cellulose contents and degree of polymerization in this treatment condition. Oxygen-alkali treatment condition is the worst method because of low yield, low degree of polymerization in this pretreatments.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.4 no.1
• /
• pp.23-36
• /
• 1995

The purpose of this artic1e is to compare soft tissue profiles between Korean adults with normal occ1usion and malocclusin and to identify the differences between them. The subjects of this cephalometric study were 40 males with normal occlusion(Group 1), 27 females with normal occlusion(Group 2), 28 adults with Angle's Class II malocclusion(Group 3) and 41 adults with Angle's Class III malocclusion(Group 4). The results of this study were as follows ; 1) People with Angle's Class II malocclusion had tendency to have more labial tipping of lower teeth than people with normal occ1usion. Through NOA angle measurement, it was determined that people with Angle's Class II malocclusion had more protruding midface than people with normal occlusion and people with Angle's Class III malocclusion had retruding midface. 2) Through Powell's esthetic triangle analysis, it was determined that people with Angle's Class II malocclusion had retruding chin and protruding nose. 3) No significant differences between people with normal occlusion and maloclusion could be identified by measuring soft tissue profile angle basis of S-NS plane. 4) There were significant differences between groups with normal occlusion and malocclusion by measuring Facial convexity angle(Significance level 99%). 5) By measuring the distance between each landmark basis of N-Pog plane, People with Angle's Class II malocclusion were identified as having more protruding midface, but there were no significant differences between people with normal occlusion and Angle's Class III malocclusion. 6) By measuring the vertical dimension of the face, it was determined that the lower facial height was higher than the upper facial height in all groups, particularly in group with Angle's Class III malocclusion. 7) By measuring the lips basis of E-line and S-line, it was determined that people with Angle's Class III malocclusion had more, protruding lower lips than people with normal occlusion, while people with normal occlusion, while people with Angle's Class II malocclusion had more protruding upper lips. By measuring the distance between the superior sulcus and inferior sulcus basis of H-line, people with Angle's Class II malocclusion had thicker upper lips than the other's.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.283-298
• /
• 2008

Objective: The purpose of this study was to investigate changes in the mandibular dental arch from presurgical orthodontic treatment and orthognathic surgery, and to evaluate the relationships between the pretreatment records and changes of mandibular dental arch in skeletal Class III malocclusion individuals. Methods: Lateral cephalometric radiographs and mandibular study models of 31 adults with skeletal class III malocclusion were taken and measured. All measurements were evaluated statistically by ANOVA, Scheffe's Post Hoc, and paired t-test, and correlation coefficients were evaluated. Results: No significant difference in Mn-LMMC, Mn-LIE, Mn-MnOcc was detected between pretreatment and presurgical groups. Statistically significant but low correlations were demonstrated between the initial arch length discrepancy (ALD) and change in ICW, IPW1 (r = 0.492, 0.615) and change in arch length (r = 0.641). No association was seen between the initial depth of curve of Spee and change in mandibular incisor angle and arch width or arch length. Regression analysis showed that the amount of change for arch length and IPW1 could be explained by 64.0% and 75.8% of the pretreatment variables respectively. Conclusions: This study suggests that orthognathic surgery results can be predictable by measuring the pretreatment records.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.45-54
• /
• 2022

This paper is about designing and implementing the simulation training equipment (simulator) for the CBRN Reconnaissance Vehicle-II (armor type). The simulation training equipment (simulator) is a military training equipment in a virtual environment that analyzes the training using various CBRN equipment according to the CBRN situation and make a professional report. The controller or training instructor can construct a scenario using the instructor control system for a possible CBRN situation, spread the situation, and observe the process of the trainee performing the propagated situation appropriately. All process can be monitored and analyzed by the system, and it can be recorded, so it is also used for AAR (After Action Review). To implement CBRN situation training in a virtual environment, instructor control (IOS), host (HOS), video (IGS), input/output device (IOC), and sound (ACS) were implemented, a long-range chemical automatic detector (LCA), a combined chemical detector (CAD), a control (MCC) and an operation (OCC) computer were developed as simulators. In this paper, the design and development of simulation training equipment for CBRN Reconnaissance Vehicle-II (armor type) was conducted, and the performance was verified through integrated tests and acceptance tests.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.160-167
• /
• 2015

The reduction of energy consumption in papermaking process has been considered as one of the major issue in the paper technology. The energy efficiency of paper mill becomes more significant for the mill which manufacture the board grade products such as linerboard with recycled paper such as OCC. The application of lignocellulose spacer to the board grade paper stock would be the feasible solution by increasing the paper bulk and the drying efficiency. The major defects originated from the application of the lignocellulose spacer could be the loss of strength properties. In this study, the ways for improving the strength properties of the spacer-added linerboard were suggested and evaluated. The effects of the addition of various types polyelectrolytes were tested and the different methods of polyelectrolytes were applied for finding the efficient way. The pretreatments of lignocellulose spacer with the polyelectrolytes during wood spacer hydration resulted in the higher strength properties than the typical application method such as the addition to the mixed stock. Multilayer treatments of the spacer with polyelectrolytes were also evaluated and leaded to the higher strength properties with the similar bulk improvement.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.2
• /
• pp.91-101
• /
• 2008

For a friendly interaction between human and robot, emotional interchange has recently been more important. So many researchers who are investigating the emotion generation model tried to naturalize the robot's emotional state and to improve the usability of the model for the designer of the robot. And also the various emotion generation of the robot is needed to increase the believability of the robot. So in this paper we used the hybrid emotion generation architecture, and defined the generalized context input of emotion generation model for the designer to easily implement it to the robot. And we developed the personality and loyalty model based on the psychology for various emotion generation. Robot's personality is implemented with the emotional stability from Big-Five, and loyalty is made of familiarity generation, expression, and learning procedure which are based on the human-human social relationship such as balance theory and social exchange theory. We verify this emotion generation model by implementing it to the 'user calling and scheduling' scenario.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.59-65
• /
• 2005

There are accumulations of remained chemical additives and contaminants in the process water of semi-closed linerboard mill. High temperature of the process water aggravates the anaerobic digestion of contaminated process water and causes the generation of hazardous gases, which are from the biological reaction of varied additives and contaminants. The hydrogen sulfide in the gases easily combine with moisture in the air, and become sulfuric acid, which causes corrosion of paper machinery. This hydrogen sulfide is from the reduction of sulfate ions in the process water, and the sulfate ions are mostly from the alum. We changed the alum to PAC (Poly Aluminum Chloride). The results were preventing generation of hydrogen sulfide, and equivalent sizing effect by the use of PAC.