• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.258-265
• /
• 2003

This paper suggests the noise reduction method of the engine cooling fan. The fan noise contribution to the OASPL of engine room was estimated and the noise source was identified for the rotating fan by sound intensity method. And the program for Predicting the noise spectrum of axial flow fan was also developed. The radiated acoustic pressure is expressed in terms of discrete frequency noise Peaks at BPF and its harmonics and the line spectrum at the broad band by the proposed noise generation mechanisms. In this Paper, it Is shown that the comparison of the measured and calculated noise spectra of fan validates the noise predicting program. And this paper presents the characteristics of the fan noise in order to modify the design parameters. Accordingly, the design parameters were determined for the noise reduction of the fan.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.1059-1066
• /
• 2011

The micro-perforated panel absorber(MPPA) is one of promising noise control elements because of its applicability to extreme environments where general porous materials cannot be used. Since the MPPA is inherently non-porous sound absorber, it can be a good candidate of acoustic protection system of a space launcher. The overall sound pressure level inside payload fairings of commercial launch vehicles is so high(around 140 dB OASPL) that the conventional linear impedance model cannot be directly applied to the design of the acoustic protection systems. In this paper an acoustic impedance models of a micro-perforated panel absorber at high sound pressure environment were reviewed and the use of the impedance on the practical design of MPPAs was addressed. The variation of absorption characteristics of MPPA was discussed according to the design parameters, e.g., perforation ratio, the minute hole diameter, the thickness of MPP and the incident sound pressure level.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.178-185
• /
• 2011

The micro-perforated panel absorber (MPPA) is one of promising noise control elements because of its applicability to extreme environments where general porous materials cannot be used. Since the MPPA is inherently non-porous sound absorber, it can be a good candidate of acoustic protection system of a space launcher. The overall sound pressure level inside payload fairings of commercial launch vehicles is so high (around 140 dB OASPL) that the conventional linear impedance model cannot be directly applied to the design of the acoustic protection systems. In this paper an acoustic impedance models of a micro-perforated panel absorber at high sound pressure environment were reviewed and the use of the impedance on the practical design of MPPAs was addressed. The variation of absorption characteristics of MPPA was discussed according to the design parameters, e.g., perforation ratio, the minute hole diameter, the thickness of MPP and the incident sound pressure level.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.699-708
• /
• 2021

본 논문에서는 제자리 비행하는 동축반전 로터의 설계 파라미터인 상하부 로터의 축 간격에 따른 공력 특성 및 공력소음 특성에 관해 전산유체해석을 통해 분석하였다. Reynolds Averaged Navier Stokes 방정식을 사용하여 공력 해석을 진행하였으며 공력소음 해석 시에 Ffowcs Williams ans Hawkings 방정식을 사용하여 공력 특성 및 공력소음 특성을 비교하였다. 동축반전 로터는 회전에 의해 상하부 로터가 다른 각도를 가지며, 위상이 주기적으로 변하는 비정상 특성을 가진다. 상하부 로터의 간격이 증가함에 따라 유동 상호간섭이 감소하여 추력 및 토크의 공기역학적인 효율이 증가함을 확인하였다. 공력소음 관점에서 회전 평면 방향으로 방사하는 소음 특성은 축 간격에 의한 영향이 미미하게 나타났다. 로터 수직 아래 방향으로 주파수가 증가함에 따라 음압이 감쇄하지 않고 크기가 유지되어 전체 음압 수준을 증가시킨다. 동축반전 로터의 축 간격이 증가함에 따라 유동의 비정상 특성이 감소하여 전체 음압 수준이 크게 감소함을 확인하였다.